Datasets:

Siki-77

/

Amazon_category_polarity

like 0

Ordered this for my Samsung fridge model RS25J500DSR Don't buy leaks all over the place Don't be cheap get an original if you go to Samsung factory outlet. com you can get your filter and at a cheaper price original I got mine for 24.95 still waiting for it and plus it has a 30 day money back guarantee customer service is awesome so now I have to waste time to return this filter and plus they make you pay for shipping to return it just so you know. hope this was helpful never again will I buy generic.

This dishwasher is amazing! Easy set up, washes dishes and dries them. Everything is spotlessly clean! It's quiet and I had no problems with leaks. I purchased it a few months ago and so far, so good. It leave my dishes clean and visually it looks good. The only downfall is that my large dishes do not fit in it, but I do not mind because they are easy to clean. I was comparing this dishwasher and the following http://www.amazon.com/gp/product/B005NK21MM/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B005NK21MM&linkCode=as2&tag=civcikdx-20&linkId=NQVS75KNU25BJDIS I decided to go with Danby :)

This was just what we needed for our LG washer. (Model WM2350HWC) Since the only function of this device is to keep your door partially open (unless you completely close it) in order to prevent mildew, and we keep the door open anyway, we didn't really even need it, but it was nice to have. (also the part came with a sort of note of apology from LG that we needed this part, acknowledging the fact that they were sorry the original part broke, which was kind of refreshingly honest.)

I was worried about CO2 levels in my basement office. Turns out they levels are fine, but there is some fluctuation. 400ppm with the windows in the house open, up to a max of about 950ppm when the windows are closed and I'm running around. In the dark, I noticed that it shines an internal light every once in a while. Don't know if that's for sensing CO2 or relative humidity. Doesn't really bother me. A very useful, unobtrusive device.

I wouldn't buy it again. Arrived with two of the four corners bent due to poor packaging. The vent flap doesn't seat firmly on the body of the vent cap and can't be adjusted to do so (the thin metal flap appears to be sprung).. The bird screen is simply wedged in and popped out when I touched it. Any bird or squirrel would have little trouble pushing it out of the way. The metal is light gauge but serviceable. The finish is good and is the only outstanding feature. All in all, barely serviceable . There must be better products out there.

Did not receive a discount, honest purchaser who paid full price and I'll be bluntly honest. This is a complete waste of money. It worked for approximately 6 months and then, it magically started forming a massive block of ice on the coils that will not break apart and the unit won't work at all. No ice produces except this huge iceburg too large for the machine to operate. Epic FAIL. Run, and find another ice machine to purchase. Unless you'd like to slowly start re-icing the Arctic this is not the machine you want. Do NOT waste your money on this tremendous disappointment.

I bought this ice maker for my daughter who is away at college. The reviews were awesome and she was thrilled to receive it as a Christmas gift. She took it back to school. It worked three days and stopped working. She kept getting a water level error. She was not able to get the machine to work in spite of trying everything suggested, including resetting, unplugging etc. Those suggestions came from fellow Amazon customers. The customer service contact information is not very clear on the instruction pamphlet. Sadly, my daughter will be lugging this very heavy machine to the UPS store to return it tomorrow. This must be some sort of glitch in the machine. A few people have mentioned the same problem.

The part failed after about one year. As other reviewer said, I believe this was not a genuine LG part. Also another reviewer mentioned, the impeller tines were worn, and impeller eventually stripped off shaft. I suspect the tines are wearing against casing causing the motor to work harder than expected. When pulling it out to replace again, the impeller fell off and o-ring was loose so probably water also got into motor. I purchased a new part from repairclinic and it was clearly marked LG, and it runs much quieter as well.

This pump was a replacement for my WFK2401UC Bosch front-load washer that I purchased new in 2001. The old pump started jamming up and had been noisy for quite some time. Replacement was relatively easy - my suggestion is to remove the electric drum drive motor and belt as a first step once the back cover is off of the washer in order to access all of the hose clamps more easily. This new pump is nearly identical to the original. My washer pump is now quiet and reliable again! My understanding is that this pump has multiple applications - clothes washers, dish washers, etc. Rest assured, if it is the one specified, this is a good one. Also, Amazon's price was about average. Some places had it for cheaper, but made up in price through shipping.

My order arrived with the wrong instructions and missing parts. Luckily they have the instructions on their website for download, but as far as the missing parts I called and explained the situation and the person said they would ship out the missing parts right away. I waiting 10 days and the parts never showed up so I called again. They said the parts were shipping out that day, so either my initial request was never placed OR they are ridiculously slow to fix their mistakes. Either way I was not impressed and I had to ask them to expedite the shipping since I had already been waiting 10 days and I wanted everything hooked up by Christmas. Little advice Beverage Factory when you ship out a screwed up order when the customer calls you should do whatever it takes to to fix the issue as quickly as possible. As far as the actual product it is good and I am very glad I ordered the kit with the drip trays.

I've had company since May 2017. With continuous eating and drinking, my silver is constantly used. Before long, the basket that came with the Frigidaire automatic dishwasher was filled up but the rest of the dishwasher wasn't. I don't "crowd" spoons, forks, etc. and want it spacious so tableware is washed/rinsed well during the different cycles. I was a little unsure if this GE silverware basket would fit. The reviews were good so I gave it a try. Am so glad I did because it fit right in the last row. With the 2 baskets I can now put spoons and forks, large and small, in their own compartment and have compartments left for serving pieces. In the end, it saves me time getting it out of the dishwasher and putting everything in the place where they belong. I recommend this for a busy household.

After 6 months, the washer stopped working.. they returned me a new item and I paid shipping as I had not bought the warranty. Please buy the warranty...will be a fantastic investment. I've had my new one for almost 8 mos. works like a charm. love this machine. I use it everyday then hang my clothes to dry. 15 minute cycle to wash then about 5 minute I add water to the spinner to rinse out..then 3 minutes to spin. Excellent investment, has saved me over $40/month in laundering. I wash jeans, towels, standard bed sheets (one at a time). Plus all my other stuff.

I looked for a long time to find the right beverage fridge and I'm really happy with this purchase. There aren't many 17" wide glass door fridges, and I do think this is the best option for the price. I use it at a retail store and wanted something display and sell beverages. I think it's beautiful. It was really well packaged and arrived in perfect condition. The only complaint I have is the wire shelves. I would imagine a 12 oz. can is pretty stable on these shelves, and to be fair it is advertised as a can beverage holder, but since I was loading it up with tall and unstable glass bottles I found them to be pretty inadequate. I ended up putting some 3/16" thick 11" x 17" plexiglass over the wires shelves and it works great and looks nice.

These hoses are great. The 6 foot length is longer than typical washing machine hoses, which allowed me to get my machines where I wanted them. They included 4 rubber washers for drip free fittings. The brass ends seemed very high quality and threaded perfectly on to the steel water hook ups as well as the plastic threads on the machine. These hoses look good, work great, are a good price, shipped fast, and are backed by stellar Amazon customer service. Look no further.

The shipment arrived quickly, but the 2 filters I ordered are not anything like the genuine Holmes HWF65 as far as their ability to wick the water from bottom to top of the filter. Turning the filter upside down so the whole surface is wet helps for maybe an hour before the filter dries out again. I bought a Holmes HWF65 locally to compare it and it works as it should with the whole filter remains wet bottom to top making the humidifier work properly. As a result, I gave the 2 filters a toss.

I am completely satisfied with this ice maker. Item exactly as described. Shipping was very fast. I installed it in a Whirlpool refrigerator. I swapped the metal wire loop (the thing that measures how much ice in bucket) from the old unit because the old seemed to fit better with the ice bucket. I also had to cut a little hole in a plastic piece to allow the water spout to fit. That piece must be made for multiple applications where some need the cutout and some do not. It has an outline indicating where to cut it. Based on some other reviews here, I knew not to expect it to start immediately. When I installed it, it didn't do anything right away. It filled the tray with water about 2 hours later and has been pumping out ice regularly since then.

I guess it's normal that these only last about 5 years before they get brittle. I've been working around a couple large holes on the bottom- using those slots for bigger things like whisks and ice cream scoops haha! Today I dropped a fork, handle down, from no more than 5 inches and it broke right through! It's literally CRUMBLING. There are only a couple safe spots left for the usual flatware and I'm worried they won't last long so I'm ordering this. My dishwasher is 7 years old I hope it fits, color aside, this one looks very similar. I guess they can only be baked through the drying part of the cycle so many times? In the mean time I'll have to run smaller loads and flip the lids down and stick things in the lid holes to hold them up.

Fast delivery, packaged well, and easy to install. Manual for our Samsung suggested DA29-00020B, and this fit perfectly. Our filter replacement was a few months past due. The first gallon of water was a bit cloudy and the pressure was spotty. By the 2nd gallon, the pressure was steady and fast and the water was clear. I ran a 3rd gallon just because I waited too long to replace. The water tastes great and is clear. No issues so far and we use it a lot! First time purchasing this, anxious to see if it will last 12 months instead of 6. If so, I'll reorder this again.

Don't take out the old one and dispose of any parts before you get the new unit. I had to use the existing electrical harness. It was a snug fit and pulled free when I first installed it. Found out when there was no ice the next day. Pulled the ice maker again, lightly pried the tab up on the top of the harness connection so it would snap more snugly into the new unit. Reinstalled it and now I've got plenty of ice.

Less than half the price of anything available locally. Prime delivered even faster than promised. Works perfectly, dishwasher is cleaning again! Fit well: hint, screw the mounting screw into the new piece BEFORE trying to actually mount it. The screw hole did not seem to be threaded, but worked securely after I 'cleared' the threads. Solved my struggles in cramped space under the machine when screw initially would not work. Was not cross-threaded, don't know what the problem was, but minor glitch in terms of all the money saved and the glory of machine cleaning mountains of dishes!

Fits perfectly! I bought this refrigerator used and put an ice maker in it, with the proper catch receptacle. Without a shelf, the auto shut-off on the ice maker had to be set manually. Kenmore listed no part number for the full shelf and schematics showed a small four-legged free-standing shelf (which looked pretty flimsy). Thank you, Amazon, for listing this in the related items section! I can organize my freezer so much better with two levels and with the shelf set in the lower holes the ice maker is at just the right level for the auto shut-off to be engaged. I hope this helps someone else in my position.

Love this bag! I had to pack it the afternoon before I was going to use it and everything was still cool the next morning. We had something leak inside the bag and none of it came through the bag. I put around 15 juice boxes, 10 small powerades a gallon size ziplock bag packed tight with snacks and a couple of plastic containers along with a good sized ice pack. I was also able to fit a couple of child harnesses, diapers, 3 small battery operated fans, wallet and probably a few other things in the outside pocket and was still able to snap it. Packed full the way I had it, it barely fit into the bottom basket of our double stroller. It was also heavy enough that it made the stroller basket come open a few times. It's really cute. You would never think it was a cooler.

This part failed after four months of normal use. Needless to say I did not get a replacement from here. I believe these could be counterfeit parts labeled as whirlpool. The new one that I bought to replace this failed unit was different. It had the part number and the FSP label stamped into the metal frame of this heating element. The one I bought here had no stampings or part identification on the part itself. I would guess the part offered here is a cheap copy using a counterfeit box to appear as OEM. Buy at your own risk and don't expect this to last more than a few months.

The adhesive lasted all of about 2 months at which point they just fell off. I followed the installation steps exactly (pre-clean, adhesion, etc). I built a $75k custom kitchen by myself so installing these clips correctly was well within my skill set (just for those who may discredit my ability to follow directions). I bought these to save myself a little bit of time and effort. When it was all said and done I had to mount the dishwasher they way it should have been...without these clips.

Love this washing machine! I have had it since Oct. 2017 & it's such a good little helper! You just have to get used to doing smaller loads. There are features I wish it had, but it is wonderful as is. I wish there was a volume button for the beeping to turn it down or change it to a ring instead. The only cycle you can specifically select the Wash/Rinse/Spin is the Heavy mode. This feature should at least be also available for the Normal mode. If you will be moving it a lot I would recommend you buy the dolly for it which Amazon also sells.

I've seen a lot of negative reviews and felt I need to add mine since we've had an awesome experience with ours. We've owned it now for 2.5 years and never had a problem. * Rollers work great * Dishes always come out clean and we've never had to rewash. We use the little packets. * It's pretty quit. The only issue we've had is that my daughter broke a roller when she fell into it recently. The part is readily available and we were good to again in a few days.

The information I had read online said that all Frigidaire evaporator fans were the same. That information was woefully incorrect. However, it's not the seller's fault, it's the fault of that guy who wrote that original article I read. I am hunting him down now. This fan did not fit my refrigerator, but it did work. I brought it to a local appliance shop to see if there was a 3 to 4 pin converter or something I could find, and they ran a test on it for me.

I bought the stacking washer and dryer since I don't have a lot of room - we are a family of 3. For some time I thought the dryer was faulty as many other reviewers have reported. I found out that my dryer vent was at fault. It seems as though the vent should be at the same height or lower than the machine hose outlet - mine was venting straight up. To test, pull off the hose and see if your dryer works the way it should. Mine did. Now that the venting is correct the dryer works like a champ. Love it!

Very impressed. I'm NOT a handy person at all, but once I had the proper tools (I needed to buy the correct sized drill bits) and got the CO2 tank filled at a local brewery, this all went together in less than 15 minutes and to date has worked flawlessly. It did take a few minutes adjusting the valve pressure, but once set, the beer was flowing properly. My first kegerator! And the simplicity of it all makes me ask how come it took me so long to do this.

First I tried another knock off brand and ordered one thing and got another. So, I bit the bullet and ordered the OEM filters as it was time to replace the two filters for our two ice makers. Yes they work and have no complaints, other than the price made me look at other alternatives. It is my hope the other alternative gets better staffing who pull stock and become my go to filter company? I will try one more time to order the "alternative" filters six months from now. Hope they get it right?

My dryer vent had two turns and exited out the roof. So I headed for the attic with the drill and vent cleaner in hand. After a short trial, I determined it was best to add each extension as it snaked down the pipe. You wouldn't believe the lint that the vacuum pulled out at the other end! It worked just like advertised, no mess flying around, and it took just a few minutes. I then used the brush to clean every orifice around the dryer filter and drum. Thanks for a great product.

Am I glad I got this kit. Not only any kit. But an OE kit. I kept this as a reserve since my ice maker was giving me the fits no not knowing when to produce ice or not. Finally I decided to just replace the sensor side (small part) since it is easier to replace. And I hit the jackpot. Thwas the problem all this time. I will keep the main brain since I could never tell when I might decide to replace them.

This is the third Whirlpool dishwasher that I have had fail in the last 3 years! This one failed exactly one month after the warranty expired (Whirlpool didn't even consider extended a courtesy to a loyal customer), the one before that lasted 2 years, the one before that 10 years. Whirpool seems to be in a steep decline in overall quality. I manage rental units and repair/replace dishwashers and appliances all the time, but these newest Whirlpool models are unsatisfactory and unreliable. The no frills, cheap off-brand dishwashers last far longer with no problems. For years Whirlpool was my "go to" brand for major appliances, but after this series of failures I will be looking for a more reliable brand.

I was nervous when I found this because I bought it for a Kenmore washer. (Model #: 110.49962 603) and on Sears Direct the same part number (part# 8183202) is listed for $130 where this totaled out to $68. I figured it would fit but the description doesn't mention it fitting Kenmore. Either way, got the item within a week, and it was an exact fit. I was upset to begin with because only a tiny piece that connects to the hinge pin broke off on the original and I couldn't solder it back on. I am very happy I found this listing as this is the cheapest I have found. Even RepairClinic is also about $20-25 more before shipping.

The washing machine I received is apiece of junk. The display doesn't work properly and after less than a year from date of purchase the mechanism which causes the drum to spin is broke. Worse, even though it is still within warranty, Electrolux can't get anyone out here to service it. They did, however try to sell me an extended warranty for a couple hundred bucks...The service company they contracted with refused the dispatch. I paid $1600 for the combo and now they're saying that they will try to have someone identified within three days who will service it. Not 'service it within three days - identify someone who can. What kind of support id that? When/if they 'identify' a service provider who knows how far out their schedule goes. Poor equipment, poor service. I would NOT recommend buying this washing machine.

My cutting boards were a pain in the neck to store. Some of them are too large for my cabinets, so I had them in two different places. I'm an organization fanatic, so that alone was driving me crazy! Then I purchased these and, problem solved. I purchased two 3-packs and installed two of the rods spaced apart, for each board, which worked perfectly. Now I can keep my cutting boards out of the way and separated from each other at the same time, which is important to me since I have different boards for different things (meat, vegetables, etc.).

Quick delivery. Easy to read, visual very clear. I bought this product because for some reason my thermostat and ambient house temperature seem to live on two different planets. Having this on hand tells me that, yes, I am shivering because my home temp is 67 degrees, not the 73 as noted on the thermostat. BTW, my brandy new thermostat is as much in error as the old. Who, with any brains, locates a thermostat behind a closed door in a closet???

Do NOT purchase. Exactly a year after we bought this unit, it stopped working and we've had to call someone to look it over. The result according to him: "This is a terrible product that needs to be recalled as they have design and / or manufacturing issues. In this case, the flame defector is defective and the metal falling on the ignitor, breaking it". Of course, the flame deflector takes about a year to break the ignitor which is just past the warranty period. Unacceptable for a $2500 product.

Do not waste your money on this filter. It is supposed to be a brand name OEM filter but mine just stopped working right after the thirty day return period. It fit well but in less than a month it went from working to barely dispensing any water at all. That never happens if I buy these filters from Lowes or Home Depot. in that case they last close to 6 months. My house also has a whole home carbon filtration system in the garage so there is no way a filter should get clogged in a month. Would never buy these again when they cost the same at Lowes and you know they are authentic.

Purchased this vent in 2012, it works as advertized and I was satisfied with the product until now. It requires cleaning about every 6 months, which is not a big problem, but be aware it will clog up. However after being installed for only 2 years, the plastic became very brittle, and while trying to clean it, the unit shattered into about 20 pieces. It is a good product if you don't mind replacing it every 2 years. The sun's UV rays have migrated the plasticizers out of the base plastic, leaving it extremely brittle. However, I will not replace it with any plastic vent. I purchased a galvanized vent to replace it, which will last much longer.

So, this tool by itself is friggin' amazing! It's been almost a year now that my wife has been complaining that the dryer isn't doing it's job very well. I told my wife that the vent is most likely clogged. She was very skeptical when I suggested it was clogged and that I could clean it... The pictures by the vent show the aftermath of what I could get with just the brush. I'm pretty certain I pushed a clog up to the top of my vent (my dryer vents to the roof). I didn't use a drill, just my two hands. I would bet if you know there is a clog, using a drill would make it even more amazing. Simply put, I would bet this saved my house from a fire.

I bought this with intentions to replace my old Beverage center as the one I'm currently using is really old, and the door is about to fall off. When this one showed up on an amazing sale. However, when I got this one, we were going to keep it in the garage until we could get a place for it in the house. When we plugged it in the center ran really hot to the touch. To the point we were concerned about if it was safe to use. I returned it for a refund because I refused to chance a second one. I should have done more research on the company and product before I bought it because among further investigation I've found really disappointing results and reviews about the product and company themselves. I typically know better than to just be dazzled by a sale price, but that's what happened here.

This LG Electronics filter is really an A-1 filter. The water from my refrigerator has such a refreshing taste, tastes better than bottled water. I actually save my bottles and refill them from the refrigerator because the water taste so good (not kidding). When we bought the refrigerator and ordered the filter, I thought it would be like my other refrigerator where the water wasn't so gracious, but that refrigerator had been around for a while so I won't knock it. I will see years down the road, but its been going on three years and the filters have been producing this nice tasting water and where I live I don't think we have the best water, but the filer is working it. So I am happy :).

I like it. Only 4 stars because nothing beats an ice maker installed in your freezer. VERY easy to use. Hard working machine. Takes up counter space ... make sure you have room. I like the ice it makes; shape, size good for drinks. My concern was the ice melting together and not staying in single pieces like it does in a freezer. This happens a little but easily remedied with the ice scoop provided. Turned out to be non issue. The way I use it .... turn it on while I'm home once a day for a couple hours and dump it into the freezer when I hear new cubes are made until the tray is full. I like it, it solved our problem and would recommend it.

I purchased two of these for my Holmes humidifier. Seller was good, but product is bad. Firstly, the picture looks like the filter is surrounded by plastic. The product in fact doesn't have the black surround, but a metallic wire frame instead. After a few days of use, the water turned yellow, the metal is oxidized (I assume rust), and the filter is growing some white crusty stuff. The water I used goes through a water softener and reverse-osmosis system so it's quite pure. I'll be discarding this and the second filter that I haven't opened. It's priced low so it's not even worth returning.

I bought this awhile back for my kitchen renovation and finally installed it recently. Pros: - Looks great, very minimal visual impact. - The fan blows HARD on high, and is easy to talk over on low. - Recirculating or vented installation options. - Not very hard to install. - Carbon filters to filter the air if you're recirculating. Cons: - The LED lights are completely useless. I'll be looking into replacing them, but the glass makes it so the ceiling lights will light your work. - I've heard quieter range hoods. - Plastic sheetrock anchors? Really? Throw them out and screw this thing into studs/joists or it's going to fall on your stove and shatter. - The controls are a little weird. The power button doesn't turn it on, just off. Strange, but you get used to it fast. Overall it's great and we're happy with the purchase.

I have used these for 3 winters. They make a bid difference. I have to fill them up every morning and every evening whenever the heater is running a lot. It only takes a minute to do it though so I don't mind. The difference it makes in the house was astonishing. No more getting shocked from static electricity all winter long! We were going through a new electric humidifier every other year due to the hard water. I save money with these because I am no longer spending that money on expensive new humidifiers and I am not using any extra electricity. They are much simpler to fill than the electric ones, which I also had to fill daily.

We have this oven and apparently the mother board broke in one of the ovens. We contacted Dacor to replace it and they kept telling us that it was on back order.. this went on for 6 months!! Then we finally used another company to install a rebuilt mother board and they replaced it for over $500 within 2 weeks (after both ovens did not work!). When we contacted Dacor first they said, send them the invoices which we did, leading us to believe they would give us a credit.. However, they did not do that and simply said it was on back order and they didn't know when it would be available. Who ever heard of a company that cannot repair its own product? It is absolutely ridiculous and we would NEVER buy another Dacor product!!! Shame on this company... overpriced products for the crappiest customer service we ever encountered!!!

Adorable little 'fridge', just know what you're paying for. I had no illusions that this was in no way going to cool/heat my beverage, as it's neither insulated nor does it have a particularly powerful cooling element. But as a desk ornament where you can place a can of soda to warm up slightly less quickly (which is about all that can be asked of this wee fridge) it's perfectly suited. This version can switch to 'heat' beverages as well, though why this is even a feature is beyond me, since basically nothing other than a can of soda or a standard Red Bull can will fit inside.

I am happy with the filter that fits my Kaz humidifier which is more than several years old. It is a little different from the ones i used to buy from the manufacturer, but it looks like it will be effective. Instead of being a long rectangle that fits in-between the supports in the base of the humidifier, this one is continuous, with some stretch in the fibers to allow you to fit it through the supports. I just hope that it does not get too frayed taking it out and putting it back when I clean the humidifier weekly during the winter months when I use it. One less star because i have not used it yet.

Bought these for my Mom to use in oven instead of aluminum foil after we had to replace baking element due to a burnt-out area that fried the aluminum foil underneath. These definitely work a lot better than the foil and are much safer. I feel better about her using these now, especially since she is in her eighties and on a budget. I know she cannot afford replacing the oven, or her home for that matter, and there is no way she could ever be replaced, so these helped take one less worry off my mind! NOTE: We did have to cut the item down to fit the inside of the oven, but that is better than them not being big enough. Also, I now use the leftover pieces as 'drop cloths' for my soldering gun.

This is the best ice maker. It makes ice very fast and it is very quiet. It beeps at various tines, first when tray is full, it continues making ice and beeps after each new drop of ice until it almost overflowing. Then it shuts off until enough ice melts and it will automatically start up again. To start the machine just press start button until snowflake blinks, do the same to shut off, until snowflake stop blinking. Instructions doesn't tell you this, icemaker will also beep when water is low. I love this icemaker.

AMAZING! Purchased this due to our home burning so I needed a dryer in our shed with the washer because it's only wired for 110 outlets for now only to use for towels,the other clothes was intended to hang on the line. But, you can use this for all your small loads. It dried 3 towels,2 hand towels,3 washclothes in 30 minutes or so. It's perfect,just a little pricy for my situation but well worth it! It will also hang on the wall. 5 stars! Completely satisfied!

This water filter came literally within 2 days. Packaging was excellent. I HIGHLY RECOMMEND YOU READ THE INSTRUCTIONS. They are clear and precise. It's not as simple as taking it out of the box and installing it. You should drop it in water for 15 mins as it is stated in the instructions. The water quality isn't too bad either. I can taste a difference, however my wife can't....This product was very easy to install, overall can't complain. It's a good buy! I got this at a discount for my honest review.

I replaced the fan but what? the fan slides ever so slightly off the end of the shaft? You really need to crank the screw down tightly without breaking the plastic to secure it to the dryer motor. That's a really cheap, not great method to attach a fan I have to say. After hearing the rubbing going on I discovered the fan had slid to the end of the shaft and was eating the teeth away on the sheet metal. Nice. After putting it back on, the fan and motor are purring quieter than ever. By the way, the original fan had warped beyond reasonable planarity which is why I replaced it. The only reason I can think this might happen would be due to excessive heat on the fan. Terrible design really.

We are temporarily moving into a smaller place while we construct a new home and planned to stack our existing washer and dryer to fit in the space we will have available. This did not take very long to install and actually took longer to remove our drawer stands. Be cautious of the sharp edges with the metal slots on the back of the appliances while installing it. The dryer has been stable while both were running, but I also chalk that up to making sure to level the washing machine on its intended place prior to installing this.

What you get: 2 x charcoal filter inserts, 4 x clips, instruction sheet complete with photographs. These charcoal filter sheets DO NOT replace the plain metal filters. These clip on to your existing filters to add an additional filtering/odor reducing layer. They clip on to your filters with the included clips (2 per filter) and it is easy to follow along with the included instructions. NOTE: if you want to replace your plain metal filters you will need to order a different item -- I can't help you there because I just clean them (the original NON CHARCOAL filters) with engine cleaner, soaking in soapy water, and then copious rinsing.

Just installed this a couple weeks ago. Used the excellent review by one of the previous commenters to help avoid installation issues. My Baffle Filters fit well... I did not experience the same fitment issues has mentioned in the other comment. Perhaps Kobe fixed this issue already. "Quiet Mode" is not very quiet. Unless you have trouble hearing or are in another room, it cannot be mistaken for being off. Lighting could be a bit brighter but you have to keep in mind that the bulbs are energy efficient LEDs so that's a tradeoff I'm willing to accept. My front burners are not directly/completely underneath the hood so it struggles to capture all the cooking fumes even on the high setting. I did have some issues mounting the hood to the cabinet that resulted in a few scratching on the front and side surface of the hood. Kind of bummed out about it. Might contact the manufacturer and ask if they would be willing to exchange for a new one.

Conceptually this is perfect for my needs, but sadly I haven't been able to test it out. For some reason something is misaligned and the rotating blade at the bottom that the water comes out of can't freely spin - it hits and gets stuck on the bottom of the cart (which has very little clearance to start with...it seems the blade arm fixture is tilted slightly to one side in my case) That said, the strip of dishes the water actually seems to hit do get cleaned fairly well, so if I can get the darn thing fixed it'll probably be decent...for for now it's basically scrap...

These are the most flimsy filters I have ever bought. I am so disappointed with this product. Do not buy them. They are not the real thing. They didn't even come in the package that is shown. They were in a plastic wrap. I will not buy this product again and from this vendor. Shame on you for advertising falsely!!! After 3 days it was a limp as a kleenex. That what it looked like when I opened the filter part of the humidifier.

This model has a defect in design that causes the heat to shut down unpredictably. Impossible to maintain an even temperature, as the unit must be recycled to get the heat going again. The 1st of these I purchased I returned for replacement as Fagor told me it had a "defective sensor". The replacement started behaving the same way in a few months. Note a number of other comments here on the same problem. Fagor customer service is very poor - they know about this problem by now, yet continue to sell a defective design. I am looking elsewhere for a dependable unit.

We purchased a new washer and dryer last month and found the flapper door in / behind the old vent hood had failed. When it came time for our yearly pest control inspection, I mentioned this to them and they installed this exact No-Pest Vent Hood and, I will say, it's marvelous. It has a wide lower lip on the round flapper lid that recesses slightly into the vent pipe in the wall and is held closed by a very small magnet which still allows for the door and hood to open when the dryer is expelling hot air but makes it virtually impossible for all but the craftiest of the craftiest pests to gain entry when there is no dryer activity. I think this is a very good product!

This fan is so reasonably priced you will assume it is cheap and flimsy, but it is heavy and solid and my contractor installed it with no problems. It looks amazing and you will spend 1/10th of what everybody spent in the magazines. I purchased the 30 inch. It is perfect in my contemporary kitchen and it is a solid functioning fan. There is no way that I would go to the Furniture Mart and spend $3000 now. I purchased the one with the glass, because I wanted to keep the view to our backyard open as possible it is great.

I bought this hose to replace the water in hose on a Haier portable washing machine, after the rubber hose that came with it exploded and flooded the bathroom. It's a vast improvement - even my husband, who doesn't really notice minor household changes, commented that it was a "real upgrade." The rubber hose leaked when we used very hot tap water (it's scalding hot in our house), and this hose doesn't leak at all, even on the hottest temperatures. It's solidly made, and I am much more comfortable that it won't break and flood us out than I would be if I had purchased a manufacturer-provided replacement.

Last year our Frigidaire front loader washer (model ATF6000FS1) door lock broke and the washer couldn't utilize the spin cycle. We weren't sure if we would have to buy a new washer until we did some troubleshooting and discovered that the door lock was easily replaceable with the correct part. We searched on Amazon, found the part, and two days later, after watching a short YouTube video on the installation, had a good-as-new washer again! It was fairly easy to install after watching the video. I can't tell you how relieved we were to spend a small amount of money in order to have our washer work again. A year and a half later, it is still going strong. If you are having the same problem we had with our washer and this is the part you need, I would highly recommend purchasing it!

It seemed that the newer reviews had more positive opinions so I rolled the dice on whether I would get the good ones or get the bad ones. What I received was two of them being functional but brittle and the other two were broke apart in a couple places. For whatever reason the glue that holds them together is failing. Using a hot glue gun I glued the broken ones back together, then I ran a bead of glue across the op and the bottom and then on both sides. Now the humidifier is adding five gallons of water a day into the air without incident.

They say this is oil rubbed bronze, but it's not. It's way lighter. Closer to the color of copper but a little darker. I even called the manufacturer and asked them how dark or light the color was and they confirmed that it would be a dark oil rubbed bronze like the faucets you see in the store, dark brown with some copper like scratches in it. Very disappointing because everything else seems well built and good quality and a good price, but the color doesn't match anything.

The fan hood is really great. I couldn't believe how much difference a higher quality fan could make in the kitchen. The low level lighting is appealing and makes a focal point to the kitchen in the night. the 3 fan speeds are very effective and the turbo boost is quite impressive. The four halogen lights can be turned up to be very bright... unfortunately I had to get the stainless cleaner out because the cooktop that it illuminated had more grime that I ever saw before! 4 stars instead of 5 because the installation instructions were a little cryptic, and in some cases inaccurate. One point I need to make is to be sure it is installed level. My cabinets from where the old fan was removed, weren't level so it was quite difficult to get the fan to not rub against the lower side of the housing. I had to remove it and reinstall it to correct the unlevelness of the mounting surface.

I was one of the suckers that made the quick trip to my local hardware store to buy a dryer duct, like I had in years before. Unfortunately, the local "Big Box" store only sells the "semi-rigid" which will dent and break easier than you can with your thumb through a piece of tinfoil! Then I bought the "Proflex"perfect!! Open it slow, which you'll do if you've experienced any problems with a semi-rigid duct, and it will fit easily into place!! The clamps, as others have previously said, are pretty worthless. I used my old clamps which still work fine.

So, there are a lot of non brand name options when it comes to the replacement filters for refrigerators, both in terms of water and the air filters like these. And while there are some people that insist on buying the brand name from the refrigerator company because they think they can "trust them more", it's really just silly and you're paying extra for a name. We tend to always buy the non-brand replacement water filters, as they cost less than half the price. And the same is true when it comes to these air filters. These are less expensive than the brand name filter, and they're basically the same thing! They are almost identical in every way except for the packaging. They're both filters, and they both last just as long as work just as well. We have no problems with these, and the only thing they do is save us money. We received a discount on these filters for our unbiased product evaluation.

I bought this as a replacement to my Samsung DA29-00003G refrigerator water filter. Although the description clearly says it is a compatible replacement, it was obvious when I tried to use it that the grooves that hold it in placed where not designed like the original and it was not secure. I am sure that this has something to do withe the people who experienced leakage. I did not even trust it enough to leave it in. The price may be good, but design is not accurate. So I don't recommend this product.

This item is not of the same quality as what I have ordered in the past, which is a better product -- Honeywell HAC-504AW Humidifier Wick Filter, Single Sold by: Amazon.com LLC. This one from Today's Concept shipped in a plastic bag and was kinda smushed flat when it arrived. The filter itself has a metal mesh frame to it, which rusted and discolored the filter (and put what into the air I don't know) material within just a couple days, even though every morning I take the filter out of the water to air-dry. I used it only a few days (supposed to be able to keep them for 30 days) before it looked too scary, and I just threw it out.

I overall really like this dryer, but I do not like how fast you have to replace the filters. I've had mine for only a month and a half and had to replace the filter twice already. They are cheap though so it definitely still beats going to the laundry mat. Also it is super close to the ground so be prepared to get on your hands and knees to get anything in and out of it. Overall very efficient machine and drys a lot faster than expected, which was a nice surprise.

After reading the reviews for this product and the equivalent Aqua-Pure product, I decided to buy one of each and do a side by side comparison. The first thing I noticed was that the Water Sentinel is made in USA, while the Aqua-Pure is made in Mexico. The Water Sentinel appears to be better constructed and heftier. It also includes 0-ring lubricant, which makes installation MUCH easier. After flushing a gallon of water through each, the taste test was pretty much the same, the Water Sentinel maybe a bit better. Considering that the Water Sentinel is about half the price (and did I mention MADE in USA), it certainly seems like a no-brainer.

This ice maker broke shortly after the return policy expired. I did not mistreat, or even move the machine for that matter, before it broke. It just began making less and less ice until it stopped all together. When it did make ice, the ice was very wet and had a tendency to stick together. I was not very happy with the the ice that it did make when it was working but I figured that the ice was ok for the price I paid for the machine. Now that the machine has stopped working altogether I am very dissappointed. If I were you, I would save my money and look elsewhere for a higher quality product.

I've had the Speed Queen washer and dryer for about six months and like them very much. I am writing about Speed Queen's amazing customer service. On Sun., I must not have secured the lint filter cover and found it tossing around with the clothes, broken. I emailed Speed Queen asking where I could buy a replacement. Mon. morning I received an email telling me it was in the mail. Today is Tues. and the new lint filter cover has been installed in my dryer. UNBELIEVABLE customer service, but isn't that the way it should be?

The plastic tube that attaches the sprayer arm to the basket broke on my current sprayer. I purchased this arm kit as replacement. This kit is not complete as they do not include the piece of tubing that is needed to attach the sprayer to the basket. I had to still go to the hardware store and no one sells just this piece that was broken. I instead found a dishwasher parts/repair store open on Sunday and bought the piece needed. This was a useless purchase and is going back.

I purchased this for an aging ise dispenser on the fridge at the office. the original part has gotten brittle and started breaking apart over time, which as you can imagine is not a good thing in an icemaker. This part from Amazon was roughly half the proice of what it cost locally and it came via prime in 2 days, which is about a week sooner than the local place claimed it would take them. It matched the original exactly and took less than 10 minutes to replace. We have 40+ people in our office and this replacement part has not failed.

This is a very well designed and well thought out refrigerator. Without question, the nicest fridge I've ever owned.... with one problem. This unit was shipped from the factory with a non-functioning ice maker. After a month of trying to get it fixed, we're shipping it back to Mexico tomorrow. There's really no excuse for a company with a reputation like Electrolux to ship products that don't work. Too bad - we really like the design. But we'll be looking elsewhere now.

After owning this washer for 1.25 years, we grew tired of it's refusal to autobalance. It was not like that in the beginning. It has gotthen worse over time. It now does this approximately 85 % of the time. Customer service was contacted online. You cannot reply to the emails, which is annoying but besides the point. After 3 days of emails, I was instructed to call. After 10 minutes on hold, I was told I was loading incorrectly. Each type of clothing and fabric needs to be loaded separately. Towels with towels of similar size and fabric content. Jeans with jeans. Underwear with underwear. Etc. I do not want to spend my life doing laundry. I also think this is extremely wasteful of time, water, and electricity.

I bought an apartment 5 years ago that had this stove. I have loved every day with it. I am now moving and I was on line looking to see how much it would cost to get one installed my new house. I was shocked by the negative reviews. I have literally never had a single problem with my range. Both the oven and the burners work flawlessly and it is possible to make very fine adjustments to temperature. The oven temp is spot on. I love the star-shaped burners. A tea kettle of water or a pot of water for pasta heats very quickly. I think this is the perfect range for the person who enjoys cooking and has a relatively small space. The stove top looks perfect after years of service.

My refrigerator was a larger distance from a usable water line than most applications, so I chose this longer PEX line. It installed easily using a 3/4" drill bit to make the hole in the floor (the brass nut needs to pass through it too) and coaxial cable clips for running the water line along a joist. Super happy with it so far. --UPDATE 3/15/2017: My water line is still good and I also ordered/installed one for my mother-in-law. I really do trust this line to not leak.

I bought this to replace the OEM filter. Unfortunately, I could not get any flow out of it. I had prefilled it with water per the instructions. I put the old OEM filter back in and everything worked fine. I spent a good 15 minutes tinkering with this filter to try to get it to work. No luck. Amazon wouldn't let me return it so I got on their chat and they refunded me in full. Apparently, it's not a returnable item. Try at your own risk. At least Amazon will give you a refund if it doesn't work.

This is such a great product for touching up dishwasher racks or re-tipping racks with the rubber tips made by this company. Be sure to sand off any rust before using. My Dremel works best for doing this. You must work quickly as the Goop thickens very fast once you open the bottle. I cover bottle with my rubber gloved finger each time I draw out the brush. The only thing wrong with my dishwasher was that the racks were rusted in several places, so, Goop has given me more time before replacing the whole dishwasher.

It is a suitable replacement if your rack is rusty, but it is not nearly a good or useful as the original rack. As others have said, the handling of glasses is horrible. This rack cannot hold classes as there are no recessed rows. Also it can only hold smaller saucers. So not larger saucers and normal size glasses have to be put into the lower rack where space is always a premium. As others mention, these are also a grey plastic instead of OEM white, so accessories do not match. Even new accessories are still white while the rack is grey.

First off, I really like the way this fridge looks. It is very sleek and attractive. I work for a designer accessories company, so style is a big thing for me. I use it mainly in my office for my lunch and my energy drinks. After a couple of my coworkers were victims of (admittedly hilarious) office pranks, I decided it was probably in my best interest to protect my lunch. I keep this fridge under my desk, and only a couple of coworkers even know that I have it. Both of them have asked where I got it, and plan to get their own as well. So far it is working really well for me, and it is really handy to not have to leave my desk when I am in the middle of a project to get a caffeine boost. Good product, does what I expect it to do, and looks cool. Very pleased.

I received the filter fairly quickly. Put it in my Vornado humidifier and my whole room smell like stinky sweat! I have to disinfect my room! Sent an e-mail to the seller complaining about it and received a response promptly stating that they carry 3 types of Vornado filters and the one they sent me was an AFTERMARKET. They resent me the original one in a few days. At least they admit what they did and try to fix it. Just wished they would have sent the real thing in the first place.....

There are a number of generic filter refills out there and they may be the same size as this one, but the problem comes trying to hook them up. The cheap one I bought at Walmart had a different female connector than the GE, making it useless. Of course, you cannot tell what type the opening is until you peel off the plastic, which you cannot do before buying it. I recommend saving yourself the hassle, spending a little more and knowing you will not have any problems for 6 months.

I installed this above-deck in a boat galley that was designed to use a standard apartment-sized refrigerator at the time it was built. This one is a little narrower than the old one but only a few inches. Any fridge should have adequate airflow around or over the coils on the back if it's going to be expected to work correctly and have a long life, especially if it's in a hot environment like a garage or a boat that sits unused with the fridge running but air conditioning off most days. In the case of the boat, it had been built with fans that blow over the rear of the fridge and out a vent so expect to need the same thing if you put it in any enclosed space. It doesn't seem too loud and it looks nice. Time will tell if it lasts but it was a good price.

I've had this converter in my dryer for two months now without any problems. I had it installed, so I can't comment on the ease or difficulty of installation. I'm happy with it, though I think $35 was too expensive for such a small and simple converter. Not that you have much choice; if you buy a gas dryer and have propane, you have to convert it, and often the manufacturer's overpriced part is your only option. As some other reviewers have said, just because it's a GE part, doesn't mean it will fit all GE dryers. Use Amazon's "Make sure this fits your model" search box at the top of the product page to confirm that it will work with your dryer.

This Dishwasher works very well at cleaning and drying the dishes, we absolutely love this unit, installation was a breeze since we where replacing an old dish washer that didn't work very well, I am knocking a star off the rating since for some reason some of the installation screws where missing along with a couple of caps were not in the package which is supposed to be included, we ended up going to Home Depot and bought the missing screws and the sales associate pulled the caps from a similar display model and let us have them, Thank you Home Depot.. If not for the missing parts this would have been a 5 star review

This is great. I have been using a cup with water that after it froze, I put a quarter on top. In case the power goes out and the freezer has issues the quarter dropping to the bottom will clue me in. This is a much nicer option. It ties to one of the shelf openings and after you allow the water to freeze you add the ball and screw on the top. If you have a problem the ball will sink to the bottom and if it freezes you can easily tell that you had a problem because the ball will be stuck at the bottom. Great way to tell you food thawed. Just add water to the fill line, let it freeze, add the ball and screw the top. Done.

Zero stars for the product; 2 stars for the customer service. The refrigerator worked for 9 months and then quit. After a lot of back and forth with Danby customer service, a new one showed up on our porch 3 months after the first one quit. The second one lasted 3 weeks before it leaked a lot of a clear chemical fluid and stopped working. Danby sent us a check for most of the purchase price. We now have 2 useless refrigerators in our garage that will cost $38 each to be hauled away by the People's Republic of Seattle.

It was a Christmas gift and I was really happy with this product. It wasn't damaged and it was in excellent condition. It came with a set of pencils and instructions on how to sketch/shade the subject. The boat scene was already printed and basically you follow the instructions to shade it in. It's a great gift for someone who wants a challenge to the adult coloring books. Or if they had some art experience and want to learn more about how to use the different pencils for drawing a picture. I am a professional artist and I was pleased to give this as a gift to someone to learn how to sketch with pencils. So, if I need to buy more art kits for someone, I'll come back to this company again.

Used this to replace the pulley on my Cabrio dryer. The dryer was making a very loud and annoying squeal sound. The installation was incredibly easy. Most people can do this replacement with a few tools at home. If I recall, all I needed was a phillips screwdriver, 5/16 socket and about a 1/2 inch socket to remove the pulley. The old one had broken which caused the squealing. All together the installation took just under an hour and I took my time. Also, it will be much easier if you have an additional person helping you out as they can hold the dryer barrel up while you feed the belt throughout the pulley and motor. This was an exact replacement and now the dryer sounds good as new!

if you forget and leave this machine open, all the water drains which means you can't soak anything. you can't change anything midcycle without cancelling the wash cycle and starting over. the locking lid means you have to stand and wait for the washer to stop completely if you need to add anything to it. i was so happy to get a new washer and this has been miserable. i hate it i hate it i hate it.. I regret buying this piece of garbage. All the "features" do is take control away from the operator. I hate it

Shopped around for a reasonable ice maker for my newly aquired 2002 Carver 42. It had an old and cranky Isotherm that needed replacing. I really didn't want to shell out for Uline either. This seemed like a gamble but at this price I said why not. It's been out at sea with me over 23 days in the last year and I'm more than impressed with it. Feels sturdy to the touch and it does a honest job of making ice and lots of it.

I needed an adapter to attach a Moentrol faceplate to the valve. This is advertised to fit a Positemp model but since I could not find a plaster ground for the Moentrol, and this is described as fitting a single handle valve, I though I would try this cause it's cheap enough. Bottom line, screws for the faceplate didn't line up, so it's now a useless piece of plastic. I messed up the part and cannot return it. Be advised, it does not fit a Moentrol model.

Was fairly easy to pull apart the dryer and swap out the part. Great price and fast shipping As FYI...you will likely pull out handfuls of lint from inside your dryer when you do this job (I certainly did). Grab your shop vac and clean it out! You should also clean out the vent hose behind your dryer and the duct that routes out under the house that evacuates the dryer exhaust outside the house. Here is a link to a great product for Duct Cleaning... http://www.amazon.com/Gardus-RLE202-LintEater-10-Piece-Cleaning/dp/B0014CN8Y8/ref=sr_1_2?ie=UTF8&qid=1429963714&sr=8-2&keywords=dryer+vent+cleaning+brush

Excellent weather station so far. It took a couple of days of sitting out of package for the indoor and outdoor to read the same temps and humidity in my room. but since then they read very very close to the same all the time. My one complaint is that the outdoor senser only reads the temp in Celsius. Or if there is a way to have it display in Fahrenheit I cannot figure it out. I want to use it in my greenhouse and it would be nice to be able to know what the temp was while outside.