Datasets:

Siki-77

/

Amazon_category_polarity

like 0

This is the WORST appliance I have ever purchased. First of all - the burners on the left side are basically unusable. The back left is so small and tiny that it won't cook anything other than maybe melting butter. The burner on the front left is so big that even on moderate settings it creates discoloration in the stainless steel (literally after the first time I used it) which was impossible to get off short of using an abrasive powder which I eventually had to do. ( I decided I'd rather live with scratches than a brown, ugly stovetop). On an overall perspective, the cooktop is completely arduous and impossible to clean. And, it really has a cheap and flimsy feel to it versus stable and sturdy which one would expect from a brand and price point such as this. I highly highly advise against this product.

If the door's a lockin' but the washer isn't a rockin' then this could be exactly what your washer needs. If I hadn't read about it on the Internet then I probably would have missed this simple and inexpensive fix. All it took was a pair of needle noise pliers, a Phillips screwdriver, and 5-minutes of my time. Of course there could be other reasons why your washer isn't running the spin cycle so be sure and do some research before spending money on parts. I ordered on a Thursday and received the part the following Monday so a big Kudos to the seller for fast shipping, and additional kudos for the minimalist packaging. They've been added to my bookmarks should I need more appliance parts in the future.

I moved into a townhouse where the light in the microwave wasn't working. The landlord's comment was "There is supposed to be a light in the microwave?" After quite a bit of research, I found this guy, had it shipped, installed it, all is good. Be mindful that this is a halogen bulb, meaning don't touch the bulb itself (if you do, wipe it down really well). I used this bulb for a Kitchenaid KHMS155LSS - 1 microwave.

We had been using the OEM filters for years, but decided to give this one a try because it was available on Amazon Prime. Installation was trickier than it should have been due to the interface of filter/refrigerator not being an exact copy of the original. Once the water started flowing, the filter would create an air lock condition where air would get in the system and not allow any water to pass. We'd have to unscrew it and re-install. Very burdensome. Do not waste your time on this filter. Spend a few extra bucks and get the one that was designed for your fridge by the manufacturer.

Saw this on sale and appearing very similar to the OEM unit for my Uline 2015WCB wine cooler at 2X the price. Decided to give it a whirl, and it's been working perfectly for several months now. The frame mount is exact fit. I had to spiral the temp sensor since this replacement is a straight lead - no issues. The temp shaft is shorter, so the dial will adjust temp, but not stay on the shaft. It now stays conveniently in the bottom of the cooler. The #1 temp setting has been consistently maintaining the desired 52 degrees. Easily a worthwhile deal to this budget minded enophile.

i don't write to many of these reviews but this stove is amazing . we got it three days before thanksgiving and had 22 people for that day and 20 more for christmas and it has been stunning. the burner btu rating are high and the simmer setting is great. fit and finish of the stainless is exceptional. i would highly recommend this range. make sure to print out the instructions for LP conversion before your gas guy comes over. it will be very helpful to him (or her).

We had an older version of this filter for our fridge. It was a little smaller. One day, the fridge stopped dispensing water through the water dispenser and the ice tray. We thought that the line had frozen and we were worried about water leaking everywhere...except, we couldn't find any leaks. We thought the line might be jammed or something. It turned out that the filter was just old. We bought these filters, installed one, and everything worked like a charm. What a relief! Water pressure is good with these, and we haven't had any problems since.

The first one arrived broken due to poor packaging in the factory box. The weight of the motor cracked the plastic assembly probably during shipment. The second one that I received as a replacement for the first the pump motor stopped working after only 3 months. I do not recommend buying this and will be replacing my dishwasher now with something that is not a Maytag or a Whirlpool rather than spend another $130 on buying a new pump assembly or $100 on a new motor by itself. Thought this machine would last longer than a year and a half but guess not

Unfortunate purchase. After running GALLONS of water, the flow was still slow and sputtering. I contacted the company and they suggested I run more water through the filter. Neither one of these worked as they should, so I've let fridge run without a filter for awhile, rather that wrestle with these any further. I just recently ordered one that was a little more expensive but it WORKS! The water flow is great with no air! Waterdrop Plus!

I purchased this unit, along with the extension rods, to clean the dryer vent at my house. The house is about 5 years old and I was surprised how much lint had accumulated in the dryer vent. I used this kit from the end of the vent inside the house only, as I do not have easy roof access. I was surprised how well it worked, I started by carefully inserting the rods and counting/measuring them to see how long the duct was before attaching the brush or the drill. I then marked the final section of rod with tape so I could slow down when approaching the rain cap from inside the house. After attaching the brush and shop vac adapter, I followed the instructions carefully (especially the part about setting the drill clutch) and am very happy with the way it worked. The vent is now clean and shiny inside, my dryer seems to take less time to dry clothes also.

I used this water filter twice on my Samsung. Before purchase i looked at the website of "Water Filter Tree" and it looked very legitimate and had mention of NSF in it. However after looking into this further, and running a search on an NSF website, this company does not appear. I feel scammed now. For those who say this filter "works", yes it does, water flows through it. However i doubt any of us analyzed the finished result on a microscopic level. Until this has legitimate certification, or a scientist i trust verifies that my water is cleaner for having run through this filter, I feel that you get what you pay for. Its cheap, how good can it be? I rather not risk it and go with a REAL NSF certified filter.

This cable looks and works like the original. There is a video on YouTube that explains how to replace it. You will need a very small screwdriver. In additional to the screws on the bottom that you can see, there are 4 more under the rubber feet. You can partially peel the feet off to get access to the screws. The hardest step of the process was to "thread" the cable through the hinge area. The cable has a self-adhesive side that is suppose to hold it in place, but this one didn't seem to stick as well as the original. But it seemed to stick well enough.

5 months in Michigan).I have had issues with the vent freezing over. When this happens, I need to turn it off or unplug it to let it thaw. It has only been used one summer - 2017. Yesterday, (05/19/2018) it froze up again after only using it 2 weeks this spring. It also started smelling like burning wires and melted the on/off/heat switch. I had to unplug it to stop it. Now the switch doesn't work because it malfunctioned and melted. The cooler no longer turns on after being plugged in. See attached pictures. I feel this product is defective since it freezes over and the electrical wiring and plug melted under normal use.

I've purchased this washing machine in Jun 2016 and stopped working in Sep 2016. I've contacted Amazon. Amazon told me to contact Seller or manufacturer because there was nothing they could do since it was from third party(What a surprise). So I've contacted Seller and Manufacturer. No respond from Seller and Manufacturer. Save your money and time. It was the worst experience I've ever had. Also I've purchased Asurion 2-Year Housewares Protection Plan. They will ask you lots of questions when you call them and tell you that they would get back to you later and No respond until you call them back. I had to answer all the same questions when I called back. I had to spend more than a half hour on the phone and was told to wait another 48 hrs. Save your time !!!

We purchased this unit in 2008 and immediately wished we had not. Even with an extended warranty, we had continuous problems with leaks, the upper arm not spraying and now with no warranty left, the circuit board has decided to work or not at random. All the lights(control buttons) will go out at once and stay out for a day or maybe a week and then come back on and work fine. We got tired of this and have purchased a Whirlpool in its place. I would not recommend an Electrolux of any model unless you have a relative that is an appliance repairman!!!!

Nice fan for the money. Used for home brewing exhaust to keep my wife happy. Very quiet. Included 6" expandable duct does not fit common sheet metal couplers and elbows so be prepared if those are part of your hookup. Update 3/3/18: I noticed that in many cases the fan would either shut off or change speeds after operating for 20-30 minutes after condensation builds up on inside of hood. Turns out condensate would accumulate between touchscreen and electronics. I placed a piece of HVAC duct tape above electronics to divert condensate and i works fine so far.

AVOID THIS JUNK! These were a complete waste of money and the time to disassemble and install. They were MORE NOISY, and started to disintegrate within 5 DAYS. I should have read the reviews--I bought the LG OEM rollers after all and returned this JUNK to Amazon. The OEM rollers were immediately QUIET. The difference is qualify is obvious; the OEM roller rubber is like a car tire, whereas these cheap rollers are like a bicycle inner tube. Shame on Amazon for selling and fulfilling this JUNK to its loyal customers!

Purchased this unit as a slightly less expensive replacement for a 30 year old U-Line in my boat. The unit was so noisy we had to return it. So loud you could not talk, listen to music or read a book in the same room. Or, sleep in the next room. Otherwise it is a drop in good fit for a U-Line. Compressor, fan, and condenser all had individual obnoxious noises. Gave it a star for the all stainless construction, as I might choose this if it was going into a an open air space never occupied unless engines were running to block the noise, or perhaps in an outdoor bar. Replaced it with a U-Line which is very, very quiet by comparison.

Thank you. .this saved my fisher paykel washing machine. .was getting a hum from the pump. .checked the error code. .says there was something stuck in pump. .looked. .nothing in the pump. .replaced in about 10 min. .back to ruining great again. .2nd time I've replaced in 13 years. .but I love my washing machine. .don't mind spending the a little money to fix. .worst part is the mess from the water you have to drain out when you change the pump. .other than that easy fix. .

Appears to be a genuine part as described. All the marking are the same as the original. Easy to install - just unscrew the old one and put the new one in. The center "pop up" on the one I replaced no longer "popped up" so the dishes on the top rack weren't being cleaned. This new wash arm has corrected that problem, and I hope to get a few additional years out of my dishwasher before I have to replace it entirely.

I bought the first heating element 4/2013 and it went out 6/2013. They said if I sent it back they'd refund me since it was still within the 90 day warranty. I boxed it up, sent it back and ordered a second one. After a couple weeks, I checked in to see how the refund was coming...supposedly, they never got it, so I was screwed out of that money. I bought the second one 6/2013, had my dad install it since I figured maybe I did something wrong the first time...nope, tonight it's gone out again...just passed the 90 warranty. So, now I'm left trying to find someone else that sells this dryer part since I won't be purchasing from this company again. Worked great till it went out. Just buy from Sears, even though it costs five times more than this one. It'll be less of a hassle in the long run.

Last filter had nicer fit and finish, even the label had more information and on top of all the packaging was atrocious (very brittle plastic, I even cut myself in it) then wizened my self and used scissors just to see chunks shader all over! To whom did they outsource to make this filters for them. My first impressions of this new version of their DA29-00020B cartridge is lack of trust in this product, I might as well get an after market and save a lot of money (probably made by same people anyway) If it ain't broke don't fix it SAMSUNG!!!!

Very straight forward removal and replacement to install. Used on Viking VGRT5366BSS: Viking 6 burner gas range top. Burners would not ignite even thought the burner sparkers were "clicking". Turn off electricity to the unit at the breaker box. Then remove a total of 10 screws to access the module. Simple removal of the range top front bar and front face plate after pulling knobs off and you have access to the module. I chose to unscrew the module from its mounting plate to make swapping of the spade connectors a little easier. This is not necessary but I would recommend it to avoid frustration. Net/Net - this is easy fix for almost any novice.

I am very pleased with the purchase. The only reason I did not give it 5 is that the lint trap keeps coming out and the clothes dry wrinkled and need pressing. Just a hint on rinsing. What I do is once the clothes are washed/drained, I leave them there, refill with water add my fabric softener and run through wash cycle again. Then I place a few items at a time in the spin cycle. I am in my sixties and it is easy for me to move around or pick up to completely drain any remaining water in the hose.

So far so good! Had it a couple of days now and the ice looks great! Installation was reasonable with the exception of explaining the leveling bracket. Ours is connected to a Filtrete (3US-PS01) water filter so some adapters had to be bought but everything we needed was there and ready to go if we didn't have that filter. There is an adjustment screw behind the front cover and ours needed tweaking to get the right size of ice. Others complained about not getting ice but ours works just fine, maybe we just have good water pressure? 09/2016 Update: We've had the ice maker for seven months now and it still works flawlessly. We constantly have an abundance of ice.

Easy repair/replacement parts for your washing machine agitator. Watch U-Tube videos for help. My particular model Kenmore washing machine agitator has two parts. The lower part was working fine. The upper part was free wheeling in both directions from the worn out 'dogs'. I didn't realize there was a problem at first. Noticed after loading clothes and filling with water that mechanically it didn't seem to be working correctly. Upper agitator didn't move clothes around during wash cycle. Upper agitator needed to move like bottom part to effectively wash clothes. Heh, our country needs working agitators now more than ever.

Following a couple of Youtube videos, I was able to replace the belt and rollers. In my case, the rollers had worn and the dryer was making a terrible squeaking sound until it warmed up. The little tri-rings are a royal pain. To this day, I cannot figure out how to remove or insert them without snapping one of the sides. They are brittle as heck. So my rollers are being held in place by tri-rings that are broken on one side. They have been holding fine for 4 months, and because they don't have any stress on them under normal conditions, I feel they are safe for the rest of the Whirlpool's life.

The product was as described and is the OEM (original equipment manufacturer) filtration cartridge for the GE refrigerator. Amazon was able to offer the product at 10-15% less than in-store purchases making it a go-to option for buying several cartridges at a time. There are several other off-brand replacement cartridges that can save you as much as 50% off the GE cartridge but the reviews were mixed. I like to save money but I also want to make sure that the filter is able to remove the chemical and bacterial contaminants from the city water. I would recommend that you spend the money on the GE filter and find alternatives to saving $20 every six months.

Stunned by the good reviews on here this is an incredibly inefficient product. Sometimes it locks and you can't get your clothes out, the coin trap is near impossible to get out. It also almost never drys on the first cycle and if you accidentally push the wrong button there is no way to change that until the cycle ends, meanwhile your clothes will be locked in unless it is the dry cycle. It's almost as if this thing was designed with the intention for its owners to break it out of frustration while using it. Would not recommend. This product should not sell for more than $450 at most. Here's an update on the product. It lasted through about a year and a half. After that time the computer inside the machine died. There are few people who can maintenance this particular machine. Repairing the computer would have cost as much to invest in a new appliance.

So far so good. I`ve done about 15 loads of laundry and it cleans them pretty nicely. I do have a warning for male or females that if you have lace undergarments then avoid putting them in here because they will be destroyed. Also was a lot smaller than expected but it`s whatever. Washer only really holds a couple shirts, leggings, and undies or maybe baby clothes. Also shouldn`t fill it as high as instructions say because it will leak a bit. Saves a lot of detergent so that`s amazing. Spin dryer gets most of the moisture out but all you would have to leave is let them hang dry the rest of the way. Now to see how long the product lasts!!

I haven't had this long enough to judge reliability, but out of the box, this thing is as good as I had hoped. Installation was a breeze, given it's a cooktop - put some included foam bordering around the underside glass, screw in a baffle and some anchors, connect to power, and drop in. Thumb screws lock in some anchors, and it's done. Heat is nearly instant (water comes to a boil in 1-2 minutes for me), and the controls are about as simple as they can be. Very easy to clean, and just looks sleek once it's in. Highly recommended.

This part worked perfectly for our model of Kenmore washer . With a lot of research ,we were able to find this to be the replacement part that we needed . This tasks was a easy fix and the parts were exactly alike and installed with no hassles. I recommend that you double check your cross parts # and we found that it is best to use the manufacture part # as this is the best way finding the right part for any appliances. We used partselect.com to find the parts # and manufacture # and you can go to repairclinic.com for how to videos . Hope that this helps with your do it yourself repairs.

I never knew these existed but they are amazing. I despise the crumbs that fall between the stove and counter and the leaks of stuff that dripped. These prevent those issues. I got in matte black because I worried the regular black would be too shiny. I have a black stove and grey counters. They look great. My friend got some after she saw mine and we gifted to my brother in law and his wife as well. They loved ours. Price is great. We have had for about 9 months and they still look brand new. You just wipe down. Super easy to clean. Heat resistant - I constantly put hot lids on them. No issues with fit and by how they have lasted I assume I will never have to replace. I have a standard sized kitchenade glass top stove.

I purchased this range without knowing that a cooling fan comes on whenever the oven is over 375 degrees. The convection fan is nice and quiet but the electronic component cooling fan is very loud, especially if you have a living space nearby. It is like having your hood fan on the entire time. No mention about this or the noise level in the specifications. Not sure why GE would use such a loud fan. [...] The link above gives you an idea of the level of noise generated by the cooling fan.

If you want a refrigerator, order one. This is a drink COOLER. It is quite tall so it may sit above the height of most office furniture if you plan to use it as a stand-alone. It is a very good looking unit. The LED lights on the inside don't offer a uniform illumination but do have a pretty blue hue. The fridge itself will accommodate anything from sodas to full sized champagne bottles, however, you may want to get some additional organizer racks for soda vending as the unit is set upmore like a standard fridge than a vending machine. The unit is quiet, elegant, and efficient. It does not make ice. Again, if you want something that gets your drinks ice-cold you will have to do without the glass front.

Samsung refrigerator filter is by far one of the best. I have been using this brand for over a year. I like the quality. If you don't drink water from the refrigerator or not using the ice from it often,the filter may last longer than 6 months. In my case, our refrigerator is set to have it replaced every 6 months. I gave 4 stars since it is costly. Overall quality is great, no water dripping, water is fresh and clear. That fits perfect for Samsung REF

I started buying these at Wal-mart fifteen years ago and haven't found anything that I like as well. They no longer sell them there, so I now buy them in bulk here. Why are these better? They're less bulky than scrunchies, for one. They're comfortably flexible so you can get just as many wraps as you need. The padding holds on well, so they'll never shake loose. They don't catch your hair, so you never have the painful experience of having your hair yanked out. They last a very long time and won't break or fall apart on you. I do like the 'autumn' color palate. When they discontinued the line at the store, I tried *many* different styles and brands, looking for a good replacement and nothing worked as well as these. Straight, curly, thick, or thin, I promise you that these will work.

Picture on Amazon website shows this receptacle is suitable for either copper or aluminum; however, the receptacle I received was for copper wire only. Morris needs to make sure the picture of their product on Amazon matches the one shipped to the customers. The receptacle looked well made so I gave it 4 stars but unfortunately I couldn't use it since my home has aluminum wire for the electric dryer circuit. If your house has copper or copper clad aluminum wire you will have no issues with this receptacle.

The filter does not perform at all like the original. First, the water flow rate is much greater, suggesting that the filtration is less thorough. Indeed, the flow rate is so great that splashing out of the glass is a real problem. Second, the water comes filled with tiny bubbles to take a minute or two to clear. The original filter put out perfectly clear water. I have no reason to believe that the unit I got is in any way defective, but I'm going to suck it up and buy an original.

Design is great for tight spaces, and keeps an open path for the air to exhaust. I want to give it 5 stars, but I was disappointed that the elbow leaks tiny jets of air at a couple of its seams. I recommend turning your dryer on, after installing, just to check for such leaks, before you push your dryer back towards the wall. I ended up purchasing some aluminum tape, specifically designed for heated duct work, and wrapped all of the seams on the vent elbow, as well as where it connected to the longer hose. This sealed the tiny leaks, and the system works great. Also, when you replace this hose, take the opportunity to clean out any venting inside your wall. Mine was coated with a heavy layer of lint, which I found out was constricting airflow to the outside. Pretty scary stuff.

I custom install unit on my boat in lieu of the much more expensive, marine ice maker, I replaced (best idea?, no). Some basic plumbing knowledge would be helpful to hook up unit with a 1/4 tube supplied. I also installed an inline filter as recommended and because it is on a boat. Makes a fair amount of ice although I never weighed it, when I empty the bucket into a cooler (typical use), it regenerates fairly quickly. Good looking, well made and well priced. I live in NJ and will remove the unit during seasonal layups, I wouldn't expect it to withstand winter temperature fluctuations/conditions even though under cover.

This was an easy replacement in my old Kitchenaid Superba, circa 1995. The coating on the old icemaker mold was failing, leaving black specs in the ice and causing it to overfill....presumably because some of the ice was no longer releasing properly due to the failing paint thus leaving insufficeint void space for the water to go....except over the top and down the sides. Very simple job, and 100% fixed the problem. It took several hours to make the first batch of ice, so be patient.

Simple. It works great. I did have to find a protected place to put the outdoor sensor. My old house had timbers bracing up the roof, and I just put a nail on the protected side. My new place doesn't have that. So I stuck the sensor in a Ziploc freezer bag with a tiny pin-prick hole in it (for humidity), and put it in a window between the glass and the screen, on the north side of the house. The snow and rain can't hurt it.

Why didn't GE supply this propane conversion kit with the dryer like every manufacturer has done for the past 30 years? Oh, wait, I guess because they realized that they could sell the customer the dryer, and then when the customer (and the salesmen) realize the kit isn't supplied with the dryer, GE can make an additional $45 selling these $2 parts that should have been included with the dryer! The supplied instructions for installing the kit were inadequate. Quote, "On models not equipped with an access door, it will be necessary to remove the front to access the burner assembly." No instructions on how to accomplish this! Hmmm, now where are the hidden screws to remove the front of the dryer? Do yourself a favor and stay away from the dryers that require this part. On the plus side, the kit seems to work well when installed.

This stuff is awesome. I just moved into a new house and I hadn't realized before hand that the dish washer racks were very badly rusted. I noticed cause it was actually falling off and I could see it on the bottom of my dish washer and had to wash all my dishes by hand cause they had little pieces of rust in them. But I sanded down the rust and made quite a few cuts to places that were rusted all the way through..and used Rerack and now it works just fine. I was gonna buy a new dish washer...I was actually just buying this to hold me over for a few weeks until I did buy a new one but after using rerack and seeing how it works now I am gonna hold off on the dish washer until I need it...works just fine now.

This really fixed my foaming issues. I would get lots of foam on pours that were any more then 15 mins apart. I thought that was too much to be a tower cooling issue, but after meticulously balancing my lines and pressure, this was the next step. I tried building my own but it barely pushed any air, so I decided to just bite the bullet and buy this. It was rather worth it. Now my first pour is perfect 24/7.

It really is that simple to install for your Eloctolux branded dishwasher. In my case it was a Frigidaire. It installs without an hassle on any 2011 or newer model, and on older models you can simply remove a screw from the frame to put the bracket underneath the screw. I only was forced to find this because my home warranty company (ORHP) refused to cover improper installations. Because of that, they refunded my service fee that was three times the cost of this part and cancelled my contract for a refund, and as an amature I was able to install this ~$20 part in under 15 minutes including finding the tools needed, installation and cleanup.

Slightly more "chunky" than original switch so door does not always get completely closed and sealed from the inertia of gravity alone and sometimes needs to be encouraged to close. Admittedly, this is on a 21 year old refrigerator and may also be from a four year old not noticing he didn't close it. Easy enough to change and the price and shipping were right. Lastly, in the time since the 532 was being sold by Sub-Zero, it could be that the original part has been superceded and that I may be having this minor concern with a replacement switch from ANY source.

We bought this Bosch (she55m15uc/61) to replace a Bosch we had for 10 years. Since the review from Consumer Reports was good and the last Bosch was so good I gladly paid $1000. Worst purchase ever. The pump went out, then leaked and damaged the floor. We replaced the pump ($380) and it broke again 3 months later. I won't buy a Bosch again- this one was a very nice looking, quiet, piece of crap. i just replaced this with a different brand and I hope it is more reliable.

Replaced an LG-branded filter with this one. The water flow is pathetic (less than half the previous filter), and the water coming out of this thing tastes worse than tap. I spent a long time re-installing/slightly turning back from the locked position trying to find something that worked, but no luck. From all the positive reviews it seems like I may have just gotten a defective unit, unfortunately I can't wait and play the filter lottery until I get a good one. Quality Assurance needs some work...

This Amana range was purchased in 1980, and this is the 2nd replacement igniter with both the original and first replacement lasting about 15 years each. I probably won't have this range long enough to see this one die, but I expect that it will have a long life also. Well made igniter, at least as good quality as the original. Very easy to install and replace so no reason to pay a big repair bill. One thing I have noticed -- as each of the previous two igniters reached the point of no return, for at least a couple of years before they croaked it took longer and longer for the oven to light. I probably should have replaced them earlier; definitely the next time I find a range taking a long time to light I will suspect the igniter is aging and probably should be replaced before it finally burns open.

For almost two years I just thought my Fridgidaire refrigerator was just slow to make ice and super slow to fill my glass with water. I do use a lot of ice when I make a drink so I also thought it was just me. It wasn't until my filter light on the fridge came on that I decided to buy a new filter. I ordered this filter and a few days later it ended up at my house. I put it in and I could NOT believe that for the past two years I've been just dealing with a bad filter. I put the new one in and my water is pouring out very fast and the ice maker is going crazy. I can't even keep up with the amount of ice it's producing. So...if anyone out there is having issues with their ice maker and water dispenser, you may just have to buy a new filter. Brad

When I first got this I was like it looks like a real washing machine and works like one too, what's perfect is that all of my utilities are included so thats what makes this a plus, that and its small size and no washer and dryer hookups in the apt. Hook tup to the sink with a simple twist plug it in and you're good to go. Wash to your hearts content clothes clothes come out just as good as a real washer. Thoroughly impressed and for 199, saw other models too pricey, this is well worth it.!!!!

I was hesitant to purchase this because of previous reviews, and I don't usually submit reviews, but in this case felt it was important to provide updated information to others. This product is the same thickness aluminum found in local hardware stores. And yes, you need to use the special silver tape for HVAC venting to seal the edges, but that's the primary benefit of having a dryer vent product that is adjustable. This one in particular suited my needs because I needed a discharge pipe at the end of the tube (vice on the side). This product works as advertised and if you need the inlet and discharge holes as depicted, I recommend purchase of it. It's working as designed with my brand spanking new dryer. :-)

After one week of use, it was already showing build up. I used the kitchen sprayer to clean it out as instructed. The inner layer began to come detached, but it cleaned out. Now, after another week of use, it has disintegrated to the point it was preventing the water tank from shutting off (as it got in the way) so my humidifier leaked all over my bedroom floor and all over the electric cord, endangering me and my kitten since I use a water treatment to prevent build up. I'll be filing a claim. Update: contacted seller and they have the nerve to want me to pay to ship it back. I'll happily ship it back, but shouldn't have to pay. Offered to send pictures of it.

Well, actually they all are. I thought I had already reviewed this, but I learned something when troubleshooting a gas oven that wouldn't light. While researching, I found that there are two styles of electric element type oven ignitors. Flat style and round style. If you need a flat style, all flat styles are exactly the same and made at the same plant. Businesses sell them from $90 down to $9. I picked this GE from this seller because of free shipping with another small item I bought. Before this one was going to ship, I ran to town and got one at the appliance parts store. It was $50 bucks,, but I needed to have the oven up and running for an evening with guests. When the $18 one arrived from Amazon, all numbers on the GE box matched the box the $50 came in exactly. One cost $50, one cost $18. Same part.

There is a black uncalibrated knob in the back that is supposed to be used to adjust temperature. The default setting caused all refrig contents to freeze and here is no way to know temperature. So I bought a refrigerator and a freezer digital wireless thermometer which also display minimum and maximum temperatures. After several days of adjusting, the best setting found was a minimum of 29F with a maximum of 40F, all without opening the refrig door. This huge swing is totally unacceptable. I don't recommend this product to anyone.

The new panel eliminated all the freezer's misbehavior. Installation was complicated by the attachment system, and requires more force than one may think. Removing the old panel required prying it off. I used a putty knife, screwdriver, and, to avoid scratches, painters tape. That did not work until I applied sufficient force to break the unseen tabs holding the old unit to the freezer. Breaking the tabs caused concern that the new panel would not be held in place. I aligned the electronics and pressed in the edges of new panel, but it did not snap in. I then gave the problem edge a good whack. It snapped in properly. I plugged in the freezer, and it started working properly.

The splitter it comes with broke after 2 weeks. You'll have to press really hard to split the water flow and even then they both leak at the same time. This is super disappointing because I use the filter still (who wants to drink fluoridated water?) I hope they offer to replace their parts and make a new design in the future, you can see they use a system that when you pull the tab small little metal balls seal the mount and force water into the hose, which then comes out of the spout of the filter. The problem is, that these metal balls will not hold into place (in my case only two weeks!)

Our six year old front loading Whirlpool washer occasionally had water pool inside it when the washer was turned off. One time, we had a towel half in the washer and half out. The leaking water soaked the towel and allowed the water to seep out of the open washer door onto the floor. The internet and the user manual pointed the finger at the water inlet valve, so I purchased this valve. Installing it was a breeze. The biggest issue was moving the heavy washer out from the wall to gain access to the back of the machine. With just a screwdriver and a pair of pliers, I removed the old valve and installed the new one. As long as you are careful to remember which wire connects to which connection, the valve will work fine.

The part I received was exactly the same as the old on on my fridge. Super easy to replace, no leaks. When replacing the hoses, if you have the same valve as shown it doesn't need any tools to remove the internal hoses (you still need a wrench to disconnect the main supply line though!) Simply push down on the white looking washer and pull the plastic hoses out. When you put the hoses back in make sure you push hard enough for them to "snap" into place. Give the hose a good tug to make sure it locked in good. (hint: swap the hoses one at a time so you don't connect them to the wrong end.) It took me less than 15 minutes to replace. (Also recommend cleaning the dust bunnies out while you're in there!)

What an amazing invention! This beats using a wash board for sure. I can't believe how dirty the clothes are after washing for just 1 minute. Depending how dirty the load is, I sometimes do 2 rinse cycles. So nice to have clothes washed and in the dryer in just about 5-7 minutes. It's a work out as well, which I don't mind! The pic I included was of my sheets, because they are much bigger items, I washed them in the bathtub. I like to think the color gray bled out a little and that isn't all dirt!! :-/ I think you get the point at how well it pulls dirt from the laundry.

I really love this little washing machine. Make no mistake this is not like using an automatic washer, but it does get your clothes nice and clean with just a little extra effort. My husband and I are downsizing to prepare for retirement & we have moved to a very small home. The Panda is perfect for just the 2 of us. I have even started hanging our clothing outside to dry, a big energy saver. I've given the Panda 4 stars because of 2 drawbacks. First, the lint filter does nothing. I bought a small floating lint catcher & keep my sink drain protected with a mesh screen. Second, it doesn't have wheels. My handy husband built a small cart for my Panda to make it easier to move from storage to my kitchen sink. Not overly expensive, this little machine completely meets our needs.

I was Extremely Pleased with I received this Product! Very Well Packaged. Arrived in a Timely Manner. I have had my eye on this for quite some time. Also in my Favorite List. I was not too sure about making this purchase but did decide I would take a Chance. Boy, I am So Happy that I did! They look wonderful on my Stove! The Cover's are not too tin or easy to disfigure or anything such as these type of things! They actually Exceeded My Expectations! They look better than the internet picture. I could not be any happier than I am with this product! I would recommend this set of Burner Covers to those who like Apple Decors, Sturdy Burner Covers, Artsy Products, and a Product that is an Asset to add in your kitchen. I Really Love These and I am Very Happy I made this Purchase!

Two comments: It takes more than six coats of touch-up paint to cover and build up a paint chip that is about a quarter of an inch in diameter. This Bisque paint color in this particular touch up paint is just a bit darker (not as white) as the finish on our Kenmore slide-in electric stove. Neither of these two points were unexpected and an exact finish of sufficient color density to do the job with a couple of coats of touch-up should not be anticipated. I note that one or two coats of touch-up were enough to cover a very small paint chip on our Kenmore refrigerator and the color difference is no more noticeable than expected.

My Subzero 642 side-by-side fridge freezer stopped making ice, so I checked out replacement icemakers. This one is well made, looks good, and makes perfect ice cubes. I would rate it a 5 if it came with two styles of shutoff arm so it was not necessary to shorten the steel shutoff arm to fit my Subzero. But not really a big deal, just a simple one-minute job. The extra wire harness plugged right in perfectly although I was left with about eighteen inches of extra cable.

We just received this a couple of days ago. My husband HAD to open it before I got home. When I arrived, I had ice! He read the instructions and got after it. We have only made the small cubes so far. The size is great but be aware the ice is "softer" than ice from the refrigerator icemaker so it may melt faster. I had an open space in my butler's pantry so it stows away nicely when not in use. I hope it is durable and gives me years of great ice!

Much much cheaper than the OEM filter for my Kenmore refrigerator which happens to be a re-branded LG model. Honestly I cannot tell the difference in taste and or smell between the two which is a good thing. I left the original filter in for longer than the recommended amount because the OEM filter is priced at a ridiculous 80 dollars or so. Get this, it does the same thing and at a fraction of the price. Also it dramatically increased the water flow after the OEM filter became clogged.

So far it has been working with no problems. Like it states in the description the lowest temp this can be set to is 38 degrees which is about what your refrigerator temp is. Would be nice if it had lock so I can lock it when the grandkids come for a visit Update Sept 2017 If the power goes out it resets to the manufacture's setting of 58 degrees instead of the 38 degrees I have it set at. If I am out of town everything in the refrigerator gets warm if the electricity goes out. I have had to throw out some of my drinks due to this.

I have several DCS components. A 6 burner professional range and a 5 burner cooktop. Both have quality issues. After 5 years of use the cooktop developed a short in the wiring to one of the burner knobs. To get to the simple replacement, the top of the cooktop needs to be removed which entails removing the nuts on top of each burner. All were seized requiring drilling out the nuts? At $200/burner it was cheaper to. Buy a new cooktop. No consideration on maintenance. The range small oven door had poor sealing from the day it was new and a fire hazard. Otherwise in loved the burners simmer and full heat. Too bad about the maintenance. Now looking to some other manufacturer's product

I ordered the IEC320 C14 from seller gle2016 and it DID include the fuse. Doing a quick search on Youtube for " IEC320 C14 ", I was able to watch a video showing exactly how to wire this up so that only the switch illuminates when the power is on. I used a spare PC power cord to supply power to the switch and wired a surge/power strip on the inside. All tests have gone well with this switch. This switch will be going in a arcade box I am building.

Sheets and duvets tangle into one huge dryer wad / knot within 15m of starting the dryer. Have never experienced such a consistent and difficult issue with dryer tangles with any other machine. Yes there are solutions like tying sheet ends together, stopping cycle to de tangle, adding dryer balls, and making sure it's lightly loaded but none of these are fool proof with this machine. it's incredibly high maintenance, frustrating, and the entire dry cycle requires babysitting.

Watch out the the thermostat melted the wiring to the heating element this part is dangerous and will melt wiring at 220 volts ac at power input point my red wires fused together luckily they didn't short out. I am sorry but parts do not look like what the picture shows. It seems the company who provides them doesn't know the part is wrong in package, the thermostat is not shutting off the element fast enough or is letting it stay on too long. Amazon please take these off your site they are dangerous and i am a professional handyman.

I give this four stars simply because I'm not sure I could "love" a range hood. Having said that, a couple of things to note. -This was replacing a 12 year old NuTone non-venting range hood -Delivery was fast, had it next day via prime! -Was packaged well. -Installation instructions were included and easy to follow. -I'm not that handy, even so, this was easy to install. 20 minutes tops, and that included removing the old NuTone. -There is NO buld included. -The fan is not loud Overall, very pleased with this, easy to install and stainless looks great!

Fit and function is comparable to OEM supplied filter. Keeping in mind that none of these filters are designed to do anything other than remove odors and taste; If your water isn't safe to drink, a refrigerator filter isn't going to change that. It does not have the certs that are included on the OEM, but I'm sure construction and materials are very similar. If they're building the same thing, I don't need them to pay for the endorsement and charge me for them. I can just expect that it will perform nearly the same. Quoting the movie Tommy Boy, If you want me to take a dump in a box and mark it guaranteed, I will... [...] Bottom line: Fit is fine, flow is similar, taste is clean. Great product, made in the USA!

This board fixed our problems right away, before getting this we had replaced the switches 3 times, then repacked the whole light assembly. It was fairly easy to do, the hardest part was unplugging the electric connections, some were easy and some were hard to pull out. I was amazed that we didn't have to reset the Control Pad, temps, etc. this LG Fridg is 10 years old. Also there is a very good video on UTube to explain and see how to do it.

arrived on time, and its perfect, no flaws.... if anyone says they have dents LOOK AT HOW THE UPS DRIVER HANDLES THEM I watched mine and told him to NOT ROLL OR THROW IT because thats excatly what he was doing!!!! and since i was able to be here upon delivery it was in perfect condition !!! SO AGAIN I say don't say bad things about dents until you see how your driver handles the product I LOVE MINE AND WOULD RECOMEND IT

One star off for not being made in USA, as the ad stated. Perfect fit. Dead dryer fixed ! Way easier than I expected. Very informative videos on youtube explain the process. Literally, cleaning the inside of the dryer took the most time. All done in one hour ! Best value compared to buying parts individually. While you are inside, replace all these wear items. Also, clean everything ! I recommend some axle grease on the roller sleeves, and some silicone spray on the drum gasket felt. Good luck !

I ordered this pulley from Amazon because the same item was more than twice the price from Sears online. My washer was throwing the belt off the original pulley so I figured that possibly it was worn out. First it fit perfectly. Also, you couldn't tell the original from the new one as far as looks so that made me feel like it was as good as the first. The washer is working like brand new and actually makes less noise when in the spin cycle. I will definitely order more in the future from Amazon.

Had the dishwasher for 6 weeks and both my wife and I hate it. One star for quiet. Racks are very inconvenient, holds only about half to two thirds of my 17 year old Whirlpool. Some dishes come out wet. Flatware tray drips water when you take it out. Gives off foul odor that the service person told me is normal but goes away when you turn it on. Difficult to program. I was warned about the drying problems before my purchase but thought they were overblown so it was my mistake. If you are used to a conventional dishwasher, you may not be happy with this model. Fortunately, my dealer took it back today for full refund. Getting a higher grade Whirlpool for the price of a dozen roses I bought her for her kindness. Will rate the new one.

This is a great washer. And after running from a Maytag Neptune HE TL, I can really appreciate a great washer! I've had it for just over 7 months now. This washer is really quite during wash and rinse cycles. The spin cycle can get pretty intense, but it sure does a beautiful job of throughly and gently washing clothes. And if you are into conservation (going green), this is the washer for you. It uses minimal detergent and water. I would highly recommend this washer. Bosch dishwashers are hard to beat as well!

I have had my frige for about 10 years and the ice maker was allways problumadic never worked right had someone out rigthaway they said the water was not comming in to the icemaker fastenought lived with it for 10years this ice maker was the OE it stopped working about 3 weeks ago THANKYOU I got this one to replace myself becauce no more warinty it works better then the OE icemaker .Im SO SO HAPPY with this product and very EZ to inshall WHAT A DEAL Thanks Scott

We bought our GE fridge this year and had to replace the water filter and chose the recommended GE MSWF filter. It works well and Amazon appeared to have a really good price for the replacement, well under MSRP. Others have made comments on the water taste, and I don't know if it's just because we have soft water in Seattle, but I haven't noticed any artifacts, flow issues, or taste differences. Seems just work for us. It's great to have this in this built into fridge and we no longer need to fill up and store pitchers of filtered water in the fridge.

Seller did not communicate that they received my order or that it had been shipped; however, it did arrive on the very last day of the delivery time window, which in my experience is not common. Usually, I receive my merchandise several days before the last day, but the package arrived in good shape. The product itself worked well and did what the manufacturer claimed it would do. It was also easy to use. We had much more lint in our dryer vent system than I could have imagined.....now we only have to run our dryer once versus twice to get our clothes completely dry.

Bought these to use as a base to my new HE Maytag washer, which sits underneath my new LE dryer. Read numerous reviews of people having issues with their washers "walking" around, and after witnessing the spin cycles I didn't want these heavy units taking a trip into my walls. Built a custom wood stacking platform to sandwich between them, purchasing a different set of rubber feet for the base of the dryer, then sinched the whole thing together with a heavy duty ratchet strap. These feet work awesome! Even during the startup to the ludicrous speed spin cycle, the units wobble ever so much, but the stack has stayed stuck to where it was since day one. Glad for all the good reviews on this, these rubber feet fit my washer perfectly, and do the job as intended.

Pretty cool little USB fridge. Got it at a white-elephant party in a gift exchange and have been using it for about a year and a month, or so. If you plan to buy this, just know this. It is NOT designed to refrigerate in the means of bring something that is lukewarm to a cool temperature, but rather to keep something cool that has already been chilled. For instance, take a lukewarm soda and throw it in here: it's gonna be crappy. But, if you take a cold soda and you leave it in here, it will keep it cold much, much longer than if you sat it out on your desk. Great gift!

Perfect match for my Kenmore he2t frontloader. Noticed a week or so again the bleach and fabric softner weren't dispensing...a few loads didn't feel wet like they should have when done..thought I was losing it. Then one day the cold water would run or shall I say trickle for 5 mins then gave me the f20 error. Researched it and checked my water pressure coming out of the hose in a bucket which was good- checked the continuity of the water inlet valve- it was good- cleaned the screens- blew in the pressure switch hose to clear anything- nothing- it still didn't work so I figured it had to be the mechanism within the valve- yep- that's what it was- done- saved my 13 yr old washing machine... easy!

I originally replaced a water pump due to the propeller broke by the shredded glass. Dishwasher kind of started to work again but frequently water was left over after the cycle. The check valve in the original hose-drain looked like it worked correctly. What could go wrong with a peice3 of plastic rubber used for a flap? However,m that was it! I learned that after replacing the water pump again, Made Kenmore my dishwasher work again like new without paying an arm and leg to have it serviced.

I really really love this thing, which is not something I expected to say about a potty. But, it fits in our small diaper bag and we can take it anywhere and not be rushing to find a bathroom for our 2 year old. She has had no problems sitting on it, it's very sturdy. We don't use th plastic bags, we just use it like a regular potty and dump it out and wipe it. We haven't even had to use the twisting feature yet as she had no issues with using it on the lowest height. It has been worth every penny and I'd recommend it to anyone.

Have a Cabrio washing machine and it kept stopping every few seconds, just beep and stop. A bit of research led me to believe this was the culprit so I ordered this to save myself a fortune as the part itself was so expensive anyway. It fixed the problem as the washer no longer stops like that at all and in addition, the repairs itself was super easy and took me less than 15 minutes from start to finish (first time working on any washing machine). I did a web search and found a video on youtube that showed exactly how to do it, very very easy and saved me 200-300 dollars.

The control panel works great which is the expected outcome anyways. But this review is to help others diagnose and fix their dishwashers vs having to go through sears service which is very expensive. The issue started with the smart wash button not working and over a period of months expanded to other buttons. After about 3 months the only function working on my dishwasher was normal wash. Eventually all the buttons on the control panel stopped responding and the control panel went completely dark. None of the lights would come on, including start or cancel. Replacing the control panel did the trick, the dishwasher now works like new. It is a quick 20 min job to replace the panel assuming you have DIY skills and an understanding of how electricity and cabling works.

Love this fridge! It is the best fridge we have ever owned in 26 years of marriage. I love all the features, but especially the outside door opening to the extra space so you don't have to open both doors to get those items you use most frequently. Love that middle drawer for the same reason. IT's huge! I still haven't filled it up even after going on my big grocery run. I love the diversity of features, and it keeps our produce fresher and llasts longer. The fridge is colder than our last but doesn't have frozen spots like my old one. would totally recommend!

Fixed my Amana fridge in about 15 minutes! The refrigerator was struggling to get cold, and it was because the compressor wouldn't come on and stay on. Would hear a relay click every 3-5 minutes. After replacing the old start relay with a new one (this part) everything fired up as soon as I plugged in the fridge and the issue was resolved. I did not have to replace the capacitor. My wife is happy, and our food is as cold as its supposed to be.

This is the best option for anyone looking to replace the flawed parts (in my dishwasher listed as parts W10350375 or W10350376) on the upper rack of Whirlpool manufactured dishwashers (includes Kitchenaid, Maytag, and some Kennmore brands I think). This part is stainless steel with heavy nylon locks holding the wheels in place, it shouldn't break like the inferior parts that come with the dishwasher. There is a great video on youtube showing in detail how to remove the old part and install the new one. It took me maybe half an hour. My kit came with a Philips to torx adapter, although I had the correct bit in my toolbox and that was easier to use. Overall the part works well and should hold up much longer than the poorly made original design.

I never make the time to leave reviews, but I feel I must leave one here. The pump arrived within one day with Amazon Prime. I installed it myself (a non-tradesperson) the next day and we were back in business. The factory part was over $100 from their authorized part supplier, but this looked exactly the same. I did have to make one minor adjustment to my 11 year old Kenmore washer, and that was that the small tab on the electrical connection was on the wrong side at the top. I clipped it off my washer connection and it worked perfectly. Since then I've done maybe 10 loads of laundry and all have emptied as intended.

This wine cooler far exceeded my expectations because it's so quiet and got to the desired temp very rapidly. We are full time RVers so needed something small that would fit into a corner and run quietly. It's so silent I often check the digital readout temperature to make sure it's working. I noticed the temp is a few degrees colder than what I believe I set it for but have not closely reviewed the mfg instructions or taken the time to troubleshoot because so far it's close enough. I couldn't be happier with this purchase.

This OEM Whirlpool repair kit fit my dryer perfectly and has returned it to full function. I saved a bundle doing it myself versus placing a service call, let alone what a whole new dryer would've cost! On my machine, the idler pulley had seized and eventually the friction of the belt sliding over the pulley caused it to break (but not before the belt wore a deep groove in the pulley!). If you're comfortable with basic hand tools, you should be able to handle this repair, especially if you review some of the how-to videos on YouTube. The most tedious part of the job for me was removing the old triangle clips that hold on the pulley and rollers; the clips on my machine had lost their pliability, yet they weren't brittle enough to break them easily.

This isn't a review against the seller, but rather the part. It came on time and as described. This fits a fridge that was already in place in a house I just bought. The water through the door was running really slow so I figured I'd replace the filter and see if it helped. It didn't. It actually got slower. I don't care how good of a filtration process GE thinks they have, it isn't worth standing at the fridge for 10 minutes waiting for a glass to fill.

If you're reading this, you have a top load washer that uses this sensor/switch. Symptoms of problems where this switch is the culprit include: 1 - Washer starts agitating and filling the moment you turn it on (should fill first, then agitate) 2 - Washer does not start when you pull the timer switch You might be able to get the washer working by blowing compressed air into the sensor port (where the plastic tube attaches) on this switch. That has worked twice for me after encountering the 2 above problems. I'm replacing the sensor/switch to hopefully eliminate the problems. Be careful when removing the switch from the control panel (check youtube for some videos, search using the part #). It has a positioning tab and if you just twist the switch body, you might break it off (which I did). Release the tab from its catch, then twist the body to remove from the panel.

In cold weather you spend a lot of money heating and humidifying the air in your house so why would you take the warm, moist air from the dryer and pump it outside? Add some water to this unit and it'll catch all of the lint from the dryer's exhaust and it'll fill your house with warm air that smells like fresh laundry. Honestly I was skeptical of the lint-catching but there's no extra dust (aka: lint) in our laundry room since we started using this so we give it eight enthusiastic thumbs up.