Datasets:

Siki-77

/

Amazon_category_polarity

like 0

Good little machine. Hoping this one lasts longer than 2 years. I have had 3 of these now. Each time they last 2 years and then quit working. It is always past the warranty date. I use this in my office so that I can have iced tea during the day. I would like to hope this one will last a lot longer but I don't hold out much hope. However, they are relatively inexpensive if you get them on sale so still cheaper than buying iced drinks from a business nearby.

The filters I received were BestAir HW500 (1 of 4 was in the original box). They have a metal shell versus plastic on the original Honeywell HAC504. I returned them and received another set of filters which were again the same filters(HW500) I believe. They had no original box and the shell was metal, which can easily scratch its housing and stimulate mold growth in humidifier. It is also sad that I saw another review sent on October 2007 about similar problem(purchased as HAC504, received different) for the same item purchased from Allergy Be Gone.

It absolutely amazes me how much more inexpensive these are on amazon compared to other places, but that's a side note. The real beauty is removing the old ones and putting these in and feeling the glory of a job well done. It took a little time to remove the motor on the washing machine just because of the confined space it's in, but after a little elbow grease I was finally able to swap these out. These are much stronger than the stock/OEM versions because of the metal reinforcement in the center. I guess, they took notice and fixed the flaw.

I use it as a stand alone maker. It has a nice appearance and does not require installation under the counter. The only thing I recommend is to buy the "John Guest Ice Maker Installation Kit" and use the connectors in the kit and not the one supplied with the ice maker. It makes plenty of ice and is actually a quite system. Update: Been using it and still love it. The only new thing I found on it is that it needs to be defrosted after about a month so that the mechanism doesn't jam with ice pieces. It makes plenty of ice and I would still recommend it.

Nice ice maker but mine has a few hiccups. The clock gains about 1 minute everyday. So in a month's time it runs 30 minutes fast. The machine does not always follow the timer settings. The timer function works, but the machine might kick on at any time, day or night. Neither of these are major problem for me since I have a watch to look at and ice is always in demand at my house. A few extra cubes won't go to waste and if we don't catch them they melt back into the reservoir.

Hi, I own two of these. One for my rental property and the other for my house. I bought the first one 3-4 years ago for the rental apartment and knock on wood, haven't had problems with it yet. It was the only one I could find small enough for the property, which is a studio apartment. So, I bought one to use in my house. I'm an avid cook so the refrigerator always is full of ingredients. Even as my only fridge, I find its size adequate for me a single person. This has been a very good value for its style and quality.

Not a big problem installing this. To gain access to the underside of the cooktop I put this on, there are only 2 screws - open the oven door and they are on the underside of the corners to the cooktop. Then you can lift the cooktop up. There are two wiring connectors - one on the left and one on the right at the rear of the cooktop. Then unscrew the ground wire. The whole cooktop is then free to move to the workbench. The burner's spades were oriented a bit differently but they still fit the wire (two larger spades, two smaller spades. I figured that since it was AC power, it wouldn't really matter which wire plugged in where, as long as I fastened them into their appropriately sized spades on the burner.

I purchased this panel, our second now, in July of 2017. As of November 10, 2017 it has failed again. I called Whirlpool and according to their rep named Ola they do not offer ANY warranty on their parts whatsoever. Only on complete new units. I guess its too much to ask that a part at least last for one year before it quits. But, this being said, Amazon has stepped up and offered a new unit. Whirlpool said they would do the same, for $180.00 or so plus shipping. Waiting to see when it will ship, as obviously when the panel goes bad the unit is basically just a big useless cabinet. Thank you Amazon. Whirlpool, if you're reading this, thanks for nothing.

I have been using this filter for a few years now and it seems fine to me. It fit my Sears/Kenmore fridge OK. It is made in Canada which is a plus compared to most other non OEM filters which are made in China. So far I have found only one similar filter from China that is certified by the Water Quality Association (WQA) the EcoBlueLife model EBL7770 but it is only certified for Aesthetic Chlorine reduction not other harmful toxins like lead or mercury. Therefore all the non OEM filters made in China that I found here at Amazon are not certified by the WQA for reduction of harmful toxins although I may have missed some. The Swift Green SGF-M9 is listed as certified by the WQA however, I found nothing from the seller RPI Distribution listed on the WQA website. There is a question there but I have to order another filter now and I will go with this one.

We have an old farm house and do not trust the well water for drinking or ice. We have been using a similar unit from Chard for the last 3 years, but the ice dump tray on the Chard unit break ls about every 6 months. I finally had enough of repairing the unit from Chard and decide to try the Della. At $80 less than the Chard unit, the Della looks and performs identical to the Chard. The reviews are correct that the first few batches of ice will need to be thrown out due to a plastic taste, but that will go away in a couple of batches. The unit consitantly has ice ready and performs exactly as advertised. My hope is that the design flaw in the ice tray breaking in the Chard unit has been corrected in this unit....time will tell.

I didn't need anything fancy so I didn't care how they looked, only if they functioned. Wow... These things are junk. They do not stay on the stove (if you barely bump or touch them they will fall off) and the metal looking piece around the knob with the temperature/off slides around so it does not line up in the correct spot. You can slide it back to the correct spot, but who wants to mess with that? One more thing, I have a gas stove, and the oven knob started to melt some when in use. For now I super glued the knobs to have something there, but will spend the $20 for decent ones in the store. Oh and to top it off, not eligible for returns. Sounds like the seller knows they are junk.

The clean up of your racks is most important ...remove the decay, rust and be prepared to layer up the poly-vinyl coats until they rematch thickness of the surrounding spines. This is not a paint once job. It will take patience and time. The paint is volatile and needs lots of ventilation. The tine caps discolour to pink after the first wash, not a big deal as long as they hold up. Overall worth the investment as long as the dishwasher is in good working order. Mine is already 14 years old and going strong. A little TLC goes a long way.

Overall this has been a very good water bottle for me. Pros: You don't get that slight plastic taste whenever for whatever you drink, the lid seals much better then expected, and it looks great. Cons: The line pattern that's directly on the glass has started to fall off (but this doesn't affect what the bottle does, it's just annoying), This lid does require two handed operation (at first I thought it was the flip top but that issue is on me), I dropped the bottle on it's lid and a piece form the inside broke (but the seal is still fine, just takes a bit to close). Over all this is a pretty good product. I would recommend it.

One of my vaporizers is the evaporative style - that is a fan blows air through a sponge like material to put water in the air. I have been very happy with it until it started to smell, and the evaporator "sponge" turned black. I found this Kaz Bacteriological And ordered it. My problem is solved. A few drops of this fluid put in the water and eliminates the bacteria that cause the problem. The smell is gone. The blackness is gone, and the air is now refreshing. I recommend this product.

It's a water filter. I pulled the old one out and then I put the new one in and when I pushed on the lever to get water, water came out. The price is terrific for a product that seems to perform as well as the product I pulled out. I got a 3 pack which supposedly lasts me a year and a half for roughly half the price of 1 OEM. I don't notice a flavor difference, or a pressure difference between original and the new Tier 1.

I wanted a single fridge for my basement bar, and I really didn't want a dorm fridge. This has been a good compromise, as it holds both cans and bottles well. Since I have both wine and cans in there, I don't keep it ice cold, but it's very good at maintaining temperature and it seems like it could get very cold if I set it down lower - I'm on the middle of the dial. It did arrive with some scuffs on the top of the door, but in otherwise good condition.

so far so good with this thing! i wasn't expecting the world with it and i had an understanding of how it works. its like you heated and cooled seats in your car. which is why there is one hiccup with it. it draws a tiny bit of condensation on the cooling coil which collects in the botton no big deal. i live on the road out of a cooler and hate robing the hotel ice machine. this is the perfect alternative. the 12v dc lead gets a little warm, but the 120v ac lead always stays cool. its perfect for what i need it to do!

I bought a Maytag Bravos dryer style MGDB850WL The dryer does not thoroughly dry clothes on any preselected cycle choices offered on machine. I have had the repairman out four times. Today Maytag told me that the sensor in the machine will read one item in the load as dry, rotate a few more times and then stop. Therefore, every time I think a load is done, it is still quite wet. It takes two cycles to dry every load. A waste of energy! Since I did not design the dryer I asked them to replace it, and was told to use the one timed dry cycle to make it work. The sensor is clearly a manufacturer design defect. Do not buy this dryer as Maytag/Whirlpool refuse to stand behind their product.

My hair looks great when using this brush. No flyaways, full volume. I appreciate that it's not too noisy. It is, however, not comfortable to use unless you have very long fingers. My hands actually ache from using it, and I'm developing a new callous on my thumb. I find I need to return to the blow dryer and round brush a couple times a week just to give my hands a break. Two changes would help to make this air brush worthy of a five-star review: spin controls that are closer to the narrow part of the handle and a longer cord. Not everyone has an outlet right in front of the mirror.

I took out the original Lasko filter and put one of these in. Yes it fit, but I observed that I was filling the jug much less each day. With this filter, the machine (Lasko 1128) is struggling to put out 3 gallons a day, while the original Lasko filter was pumping more than 6 gallons a day into the air. I run the machine on medium 24/7. No other factors were changed. I can only conclude that this filter doesn't distribute the water as efficiently as the Lasko filter. From now on, I'll stick with the manufacturer's filter.

This arrived fast and perfectly by truck. No hassles and under the counter very quickly. Connecting the waterline was no problem. I was doing a re-model but actually put this in myself. It looks every bit the part of a serious ice machine. I ran it for a few cycles to clear out any dust that usually sits in the unit. It started cranking out ice very quickly and filled the bucked in less than 45 mins. Seems like it would easily make 50+ lbs if need be. I will soon putting it to the test when I have close to 30 beverage-loving friends over. I was considering a Scotsman built-in but just couldn't pass this up at slightly more than half the price. Absolutely pleased with it so far. The noise is average for a stand alone ice machine. Well worth it.

Came home from vacation, and ran too much in the dryer at once. The big load kept the hot air from traveling through the dryer, and the heater coils got too hot. Modern dryers have cut-off thermal switches and fuses to shut the heat off and prevent a fire. I looked up my model on-line, and found the 2 cut-offs that are attached to the heater. I actually ordered both, since it's a pain to open up some dryers, and for a few extra bucks, it's worth it. It took me 2+ hours to change them out, but that is because my dryer requires the top/food/front/drum to be removed to reach the component. Still cheaper than a service call!

Bought as a replacement for a 22 yr old unit in my Whirlpool refrigerator. Installation was straight-forward although the included instructions were only marginally helpful. I found it best if you have the old unit out and compare with the new one. I did have to switch the shut-off bail to the new unit but this was minor. The old unit was flaking off the coating on the ice tray and ended up as black specs in the cubes. The product included several power connections to fit various units but I was able to use the existing hookup. Overnight the ice bucket was nearly full and no black specs. The unit has only been in service about a week so can't rate it's longevity. Overall satisfied.

I have used this in conjunction with a home ventilation system, with one remote outside in a porch and another in the roof cavity. The ventilation system is automatically controlled by temperature, but having a humidity reading allows further refinement manually. Love the colours and set-out of the base station screen. The battery comparrtment cover for remotes is just a click-on thing rather than a screw- on thing with a gasket,so put some tape around the cover if there is a possibility of splashing. Best value for money compared to anything on the NZ market at the moment.

I would recommend contacting the company (PlumStruck) before ordering this item, so you know what you're getting. I ordered it because I wanted something like in the picture: a plain backsplash with a brushed surface and mounting holes. Instead, the finish was mirror-like, and not brushed. There was a white hem around the sides. There were no holes. Also, though the item seemed extremely well packed, one corner was slightly bent, and the finish had a number of scratches. PlumStruck was great about giving me a refund, and I'm happy to believe that the damage was unusual. But even undamaged, it wasn't what I wanted. It weighs around 7 pounds, by the way, which seems to be a normal weight for a backsplash, judging from other web sites.

We have purchased this filter a few times now, but for some reason the one I purchased through here does not clear. We have already exhausted 20% of the filter status trying to clear the filter like you're suppose to do when you insert the new one and it is still cloudy! We've spent multiple days in a row sitting in front of the fridge to clear the filter and have wasted so much water in the process. We've never had an issue before with this filter. Wish I could return it!

This unit is fast, quiet enough, and has more than paid for itself in the year we've had it. We used to buy a lot of bagged ice because no one felt like refilling the ice trays, and there was no supply line available for an ice maker in our freezer. This unit works like a champ! Planning ahead by a few hours means we even have plenty of ice for entertaining. I fill gallon zip-locks as the machine fills so it will keep making ice. I find the out-of-water feature doesn't work for me, so I'm careful not to let it run dry. Note that the machine is not chilled apart from the evaporators that make the ice, so you should plan to transfer to a freezer regularly and switch the machine off when you have enough ice.

My wife ordered these last year and they fit perfectly. This year we needed more and the same product number and even had the "You purchased this item on" message but what we got wasn't the same item. It had been a while since this order was placed so instead I just gave them to Goodwill and will be purchasing locally instead. If you do buy them make sure they fit after getting the package and don't let them sit on the shelf. Even if you bought them in the past the new ones may not work.

DO NOT BUY!! DEFECTIVE MOUNTING METHOD. THE ANCHOR SCREWS PROVIDED ARE NOT HEFTY ENOUGH TO SUPPORT THE RANGE HOOD WEIGHT. POSSIBLY THE HOLE THEY ASK YOU TO DRILL BEFORE INSERTING CHEAP PLASTIC ANCHORS IS TOO BIG. ALSO, THE LIGHTS ARE IN THE REAR AND SHINE THE LIGHT CLOSER TO THE WALL THEN THE COOKTOP WHERE THE LIGHT IS NEEDED. COMPANY VERY DIFFICULT TO DEAL WITH REGARDING RETURNS OF ACCESSORIES. I NEEDED AN EXTENSION DUE TO MY CEILING HT. THEY ARE GIVING ME A HARD TIME. DO NOT BUY COSMO. TERRIBLE COMPANY TO DEAL WITH.

Going to school away with your mom is really a big deal for me. My mother used to take care of me and she always remind me to take care of my hair because thats what she did too when she was young. My hair before used to be straight and hair-fall free. But now as time changes, I just comb my hair simply. After finding this hair straightener I just felt the same just like the days with my mom for my hair becomes straighter and smoother back again.

This thing is great. it is -10 outside and you could feel it in my dryer with my standard flapper. I put this on and started the dryer. It blew the top off the first time (user error). It stopper the cold like it is designed to. It is easy to clean if needed. I have done about 30 loads so far no problems. the plastic does look brittle, and it does need painted to prevent breakdown from UV light.

I bought this as a replacement for a GE 18" dishwasher and I have to say that I am very impressed by it's performance. The ONLY reason I am giving it 4 stars is it's price. Smaller units shouldn't cost more than larger units. Period. That said, I couldn't be happier. I find that I'm using less detergent and getting better results. One of the previous reviews for this machine mentioned that the utensil basket was a bit wonky. It is in that it comes with dividers for each piece but I've found that the divider and handles can be removed so you don't have to bother with that if you don't want it. You can also make the single basket into two. I like that I have this option. The machine has two spray arms for better cleaning top. Wonderful for getting things clean on the top rack. I do wish it were quieter but all in all this is a wonderful machine.

I really was happy about the purchase of this washer, until I actually used it. I thought I had made a good choice because Consumer Reports tests showed that it left clothes cleaner than other washers in this price range. I can honestly say I've never seen anything like it! The clothes were clean. Unfortuantely, they were also shredded. Towels and large items washed fine, but delicates or even lightweight tees don't do well. The machine is just too harsh. The clothes end up twisted and sometimes even torn. I decided to try a few things including distributing the clothing more evently or adding less clothing per load. Nothing solved the problems. If you want clean but shredded or torn clothing, then this machine is for you. If you prefer to wear your clothing more than once, go for a different washer. I returned this machine less than a month after purchase.

I just love Miss Jessie's Curly Pudding!!! It's the only thing that i have used that keeps my curls from frizzing. I hate spending a lot of money on styling products but this is so worth the money. I originally bought it at Target for $22 for an 8 oz jar. Glad I checked on here before buying it again at Target as it is such a better deal on here. For anyone who is complaining about this product making their hair dry, brittle, flakey......you are using way to much!! I have thick, curly shoulder length hair and I don't use more then about a teaspoon amount on my hair. I run it through my hair and let it air dry.

This will go down as one of my best purchases this year! I ordered this for our bar and it works like a charm. It is small enough to fit on a bar shelf (of course that is case specfic) and I did notice that if it gets too hot in the room (way too many people) or is too close to something that blocks the fan, it took longer to make ice or stalled. My husband installed a shelf on sliders, and I slide it out and in as needed. When it got too hot in the room, I unplugged/replugged it, pushed start and it fired right up. I am so loyal to this machine now, that even if it breaks, I will order another. There is a lot to be said about having all the necessities available for cocktail hour.

Packaging was fantastic. They could have dropped the box from an airplane and it would have landed intact. I have had the fridge for 4 months and it is quiet and keeps beverages cold. The long power chord was helpful for using this fridge within a cabinet space. The light works perfectly. There are no condensation issues. The temperature is just right for keeping beer and soda cold. I turn it down before a party to get the beer really cold, and then set it back to normal. I highly recommend this brand and fridge.

I just received my drip pan replacements and can't comment on the wear or durability. However, ANYTHING is an improvement for my horrendously cheap and inefficient Tappan stove (read: do NOT waste your money on a Tappan appliance; spend a bit more for something not quite so dirt cheap). The black drip pans fit perfectly and look considerably better than the chrome ones that came with it. I hope that they are easy to clean than the originals, but at this point, I can't be disappointed anymore!

I bought this for my Samsung Front load dryer model number dv218aew/xaa and just let me say I'm really glad that I did! I couldn't believe the price compared to appliance part store, one lady wouldn't even tell me the price because she embarrassed how high. She is the one recommended buying from the Internet. If your dryer is making a squeaky noise more than likely that's what it is, and pretty simple to put in and of you have trouble there's how to videos on YouTube that helps alot.

After reading many reviews and questions it seems like I wasn't alone with a non working icemaker. I must admit, I was a bit skeptical, but here I am, with a cold drink in hand and full of ice once again. It worked! Many thanks to all who responded to my questions. And thanks to Amazon for offering this part. It was an easy swap and the filling tube everyone was talking about was a no brainer. Just flip it towards you as you're sliding the new unit in. For the record my 12y/o is a Kitchen-Aid side by side. The original part did not have one bit of coating peeling off the ice tray. The motor must have given up because I couldn't find a single other thing wrong. It looked like the day the factory installed it. And this new part was a perfect match. I'd say the price was very fair.

Love this dryer, don't judge but I bought so I do not have to lug laundry from basement everyday. It is in spare room on the same floor as every bedroom is so I just pick up clothes, wash, dry, no steps. Big stuff goes down to the basement to the regular washer/dryer. I like that it has a "cool" or air dry setting so that it does not heat up the room but obviously that takes much longer and I have not had it long enough to see the utility bill effect. As long as you don't overload it, clean the filter, and give it plenty of room to vent this is a great little dryer.

If every thing on your dryer works but its just not heating up, your heating element is the culprit. Works perfect......extended the life of my dryer. While your installing it, vacuum out all the lint from the interior. Make sure your unplugged first. Very simple to install. Watch the videos on youtube. You don't have to go in from the back. Just remove the front panel and you'll be fine. Make sure you clean the vent to the outside as well.

These bearings are nice but the installation was very difficult due to insufficient space I had to work with and because the factory installed the belt drive with red thread lock, I had a very hard time removing it. My model was a Frigidaire and I spent 3hrs trying to remove the main bolt holding the drive belt wheel. I broke multiple bits and I ended up cutting my Alan wrench to about 2" and using it with an impact to finally get it loose. For a newbie like me this was not the easiest project. Bearings came out easy using a bucket to support tub, new ones went in easy as well with patience. Unit runs well now but I don't think I would do it again mainly because it was in a very small space and not the easiest to work around Also the tub was not accessible through the back, mine came out through the front. Hope this helps.

If by "Universal" the manufacturer meant these knobs fit all gas stoves equally, then they must not fit any. They certainly didn't fit our major-brand stove and they might not fit yours. To add insult to injury, after receiving these I found the very same item on closeout at a local store for 99 cents. Two stars because the knobs are reasonably well-made and come with accessory sleeves to make them not fit in more than one way (or perhaps -- one would hope -- to make them fit some other unknown brands).

Not a lot to say about this item, other than (1) it fits, (2) it looks good, and (3) it works as intended, i.e. it lets the water and small food particles drain out of the sink and into the garbage disposal, while keeping the larger food particles and silverware in the sink. As noted by the manufacturer, this item is not intended as a sink stopper. If you use the setting that stops up the sink, the water will slowly but gradually drain out anyway. This item looks good, fits well, and save my garbage disposal from chomping on my silverware, and for that I'm truly grateful.

While this new clutch fixed the washing machine, the instructions regarding which spring to use in the clutch weren't very clear. The instructions referenced a black and a blue spring, while what was actually there was a light blue and a dark blue spring. The instructions stated that the clutch came with the blue spring installed, while it actually came with the dark blue spring installed. I ended up installing the other spring (the light blue appeared to be the heavier spring) and everything seems to work fine, but the supplied springs didn't match the description in the instructions.

I love this machine!!! It make ice like crazy. But it did start getting a little bit noisy after about a month but it is nothing I can't live with. I thought about sending it back and getting one that make clear ice, but I have found out with trail and error that you can make clear ice in this machine if you use purified water. Not filtered water, not spring water,and not tap water, but purified water. But even then there will be a small area at the tip that is still white. But it is about 80% clear and I can live with that. I would recommend this to anyone who uses a lot of ice. It does come out wet. I put it in a bag and freeze it while the next batch in making and the break it up and put it in the ice tray and then repeat the process with the next batch of ice.

I got the Ice Maker two days ago, I was So So excited because we don't have a Ice Maker in our Fridge, I first sat down and read the Instructions, followed them the best I could. I found them Very Very confusing. Plugged in machine, waited a 30 mins to let Machine settle and set the Clock, set the size of ice, I choose Small because the instructions said small ice would be the fastest, added my water and started, waited n waited about half hour later I got a few little hollow bulletts of ice, so waited n waited for more, hour n half later still just a few more. So my gut feelings told me to pack this Machine back up and send it right back. So I did. All I can say is Good Luck if someone gets a Machine that works right!!!!! Wish mine would have because I loved the size of machine, and realm needed it.

The customer service rep at Whirlpool would not price match this part because she said it was third-party and would not come with the same warranty. It came in a sealed box that said right on the outside Whirlpool Corporation Factory Certified Parts. A friend and I were able to change it by using this video: [...] My washer is slightly different from this in the front so it wasn't exactly the same but we were able to figure it out. The hardest part was getting the spring clamp back on. This was a lot cheaper than ordering directly from Whirlpool and I had it overnighted for $9 (I'm a prime member so it might be more if you're not).

After finally deciding ice trays are a major pain, bought this little darling in December and over 400 lbs of ice later, it just keeps putting out ice. I purchased a box of 8 lb ice bags, fill 3 when making ice and store in the freezer. As stated previously, the ice drops into a basket which is insulated, so you have to shake the water out prior to placing in the bag and putting in the freezer. When I need ice, I merely bounce the bag on the counter a couple of times to break-up the ice and it's ready for any size container.

I've tied the outdoor sensor in the shade of a tree-limb ... and the temperature results look spot-on to me i.e. the temperature seems consistent with local weather reports. Here in WY, I've seen some amazingly (to me) low humidity readings ... as low as 1%; `don't know if such low humidity readings could be accurate (or not) ? The inside display fonts are large enough to read without glasses (e.g. easy Readers) ... NICE ... and from a fair distance, say 10 feet, for example. So, I'm happily entertained with this inside/outside weather reporting ... and, yes, I'd buy another, if something happened to it - no hesitation.

Bought a Waterdrop DA29-00020B filter a while back and every time we used the refrigerator water dispenser it made a groaning noise like the the water pump motor was having an issue. We assumed it was the refrigerator. I bought the same Waterdrop filter as a replacement and the groaning noises were gone. This time I bought the Waterdrop Plus DA29-00020B and the groaning noises are back. I sent an email to the seller and didn't receive a response. Bad customer service!

We love this Shampoo. The smell isn't as fresh as the cream rinse, it is more a bubblegum smell. I would prefer the other scent. But this Shampoo has helped our dogs skin more than anything else we have tried. Our six year old border collie has developed itchy flaky skin, and he is also obsessive about itching, so he pulls his hair out. His skin looks less inflamed and less flakey when we wash him with this. If we do it regularly, it helps a lot. Very gentle, as shampoos that we used before made his skin worse.

I was wondering why I just didn't feel well after a night of using my humidifier with this product in it. I'd wake up feeling like I had bad allergies or a cold (head stuffed, nose clogged and a general, tired feeling). Plus, I don't understand why this company charges so much. It costs $6.99 in stores and on other websites. I think a drop or two of Calgon water softener might prove safer than this toxic product.

Pretty straight forward. Ordered the part, got it within a week, installed, clean clothes. It's supposed to be all plastic by the way, it's a part that is designed to fail so that the more expensive parts don't break when things go wonky. Even if you replaced it once a year, with the low cost and ease of installation (never having done it it took me all of 20 mins.), it is worth not shelling out for a new motor or gearbox.

After a lot of searching, we finally found a slide-in double oven! We were thrilled. It took a full three weeks to get this oven because it is a new product. We have had it two weeks now and I love it! Pros: sleek, looks good when clean and cooks well. We love that we don't have to turn on a whole oven to cook a pie--a real energy saver! Cons: a lot of cleaning to get it to look sleek and more importantly, beware when cleaning stovetop. If you ever so slightly lean on the control panel with buttons, you will turn the stovetop on. Any pressure at all will turn the stove on. I have noticed, however, if you do nothing, it will turn off on its own. Too new to say for certain so this might be a consideration when purchasing.

I bought this product at walmart a year ago and LOVE IT. I have very fine, color treated, shoulder length hair. I don't use this as a blow dryer, I still do that separately but I use the spin brush right after its dry. My hands are no longer tired from trying to curl the back or get the right flip, I just let the brush do all the work for me and I am done in just minutes with straight, full bodied hair. I love this product.

Residential users beware. We spent hours reviewing this frig and designing a cabinet to utilize it. The specification sheet said that it has reversible doors but we found out from the Metalfrio that the ones they have in stock now are only right hinged. The final thing that broke the deal however is the Warranty. At the end of all of our research we were told by one of the places that sells the unit that the warranty only covers commercial use. I though this information could not be true so I checked with the Metalfrio. They verified that it is in fact the truth, only commercial customers are covered. Not even parts are covered for residential use. If the thing arrives DOA you ate it, because most of the sellers will not accept returns and the manufacturer does not provide any warranty for residential use. Guess I will start shopping and designing again.

i ordered these about a year ago, and I ordered the same thing about a year and a half before that. They have always worked until just now. i used the first of the three pack and it worked fine. But the second one leaked right away. So I put in the third one and it leaked right away too. I thought the part of the fridge that the filter goes into must have gone bad. But I put the bypass filter that comes with the fridge in and it didn't leak. So I swapped the black ring washer between the filter and the bypass and now the filter does not leak. I can see that the washer that came with the filter is just the slightest bit thicker than on the one that came on the bypass so that must be the cause of the leaking. It seems like other brands have this same problem too from reading their reviews.

While these fit older model humidifiers, they don't work nearly as well as the original filter--which are no longer made. I've used many varieties of filters that say they are the same as the originals. They're not. The originals were more like cloth and could be washed out a few times, then used again. They also didn't collect yucky stuff as quickly as the newer ones. The newer ones don't last as long, are cheaply made, and are a lot more expensive. While this one works and meets needs, it's vastly inferior to the original product, and is pretty much a moneky sink, as it will need to be replaced monthly.

Bought this in May 9 of 2014, I write this now September 1st, the door tab broke off. I don't know if the OEM part is a more durable plastic, but the replacement one is GARBAGE. It snapped clean off like it was brittle and heat damaged. I use this thing daily, normal cycle. It fit my Whirlpool model DU1055XTPS4 no problem - all plugs fit. However, I'm tired of dealing with this problem. Clearly a design flaw since whirlpool updated the design on the newer models.

I like this item so far what I like most is that it turns itself off, I hope this will help it last much longer than the previous items that I have purchased. And another thing I believe is this as soon as I lift the lid, it seems to want to make ice or throw the ice it has already made into the basket so its pretty efficient in that respect if I lift the lid it seems to fill the basket no more or less and shuts off. So far its perfect for my family needs since we live in arizona we like to have ice for cold drinks. Thanks Mike Quintana

The clutch kit was exactly what I needed and arrived at my home within a few days of ordering. After having it installed for over a week, I already notice a difference in the sound and the performance in my washer. It was easy to install and I did not have any installation issues whatsoever. I did not have to change out the spring in the clutch to the light duty spring so I can't tell you how that goes. As far as the instructions given in the kit, I didn't use them and searched for a "How To" video on YouTube and that walked me through everything. I would recommend this to anyone wanting to buy this kit and not having to spend your life savings to fix your own washer.

Easy fix for my dryer. If your dryer isn't heating, replace this yourself if you are able. Look up the installation on YouTube. Once you get to the hidden clips, the dryer comes apart easily. Note: There is a belt tension contraption under the dryer drum. It falls down after you take the belt off, so pay attention to the setup before releasing the belt. This little device is cheap and simply plugs in. You will need a few wrenches and a screwdriver.

Do not put too much soap in; it'll take FOREVER to rinse. If you have to carry the clothes to where you plan to hang them it's going to get messy, a spin drier is pretty much a necessity with this in my book. Personally, I place it in the tub and use a moveable showerhead to fill. Mine is a perfect length so I can stick it in, turn it on and walk away for a few minutes and it fills right up! When I need to empty I just move it to the back of the tub and pop the tube off, do something else for a minute or two, come back and either refill to rinse or start pulling stuff out!

As an expectant mother, I have been cleaning all of my new baby products. I quickly realized that I needed something to put pacifiers and smaller items in, so I could just throw them in the dishwasher. These baskets are perfect for this. I bought this product with a drying tree, so I could just put the bottles and products on the drying tree after they come out of the dishwasher, and then I can relax! These are the kinds of things you never think to register for, but is essential to daily life!

Once again I had to pull the stove out and clean the food spills from the sides of the oven and the cabinets. No matter how careful you are there is always some food and liquid that falls down the gap between the stove and counter top. These seals are about 2 1/4" wide and since there is only a 1/4 gap between my stove and counter top the seals overlapped the counter by 1 1/2". I trimmed 3/4" off the width using a utility knife and straight edge for a guide which in my case made for a better looking installation. The gap seals are a soft silicon that is somewhat sticky so they lay flat and stay in place.

This is a very nice looking unit. It is cheap compared to box stores wanting $350 for practically the same beverage center. Nice functional incandescent light inside. Door seems to bounce open if you aren't careful about closing it securely. Compressor is a touch loud, but I think all mini refrigerators in this price range will be. The door is reversible. It holds a ton of drinks. Overall I am pleased with this appliance. Temperature control is on the back. The Danby emblem is a sticker and I peeled it off easily for a cleaner look.

Product was delivered quickly as expected, and worked exactly as I anticipated. It resolved the issue we were experiencing on our Whirlpool Cabrio washer machine. It was displaying an sd error code, which indicates too many suds. However, upon running a diagnostic test, it also revealed an additional code f71 which I googled and it lead me to conclude that it indicates a faulty hub, which is the mechanism that operates the tubs spin cycle that rings out water from clothes in completing the wash load. Now my washer is as good as new. No more error codes or hassle while washing laundry.

I ordered two filters. The first installed made our water taste horrible, it was undrinkable. I called GE and they said "it might just be a bad one". At $35 (that is sale price) but regardless of price an item should not be defective. Especially when it involves something consumable, I replaced it with the other filter bought, and that one is fine. Now going through the process to return it to Amazon. As GE will not replace because it was not purchased through them. I ordered the GE because a I didn't want to take any chances on an inferior product.

Originally installed this unit as non-vented but I wasn't thrilled. It was a bit noisy and fumes/steam from cooking on the front burner would be drawn outward versus into the fan...maybe due to negative air pressure caused by fast moving air above the unit. Not a physicist so not sure. Anyways I bit the bullet, since I tried other units and had the same issues. So I cut a whole in the wall and direct vented to the outside. What a difference. The unit is extremely quiet and sucks out air like no tomorrow. Looks good works great. Only complaint is that the flap inside the vent duct - which I guess is to prevent cold air or vermin from entering the house - made lots of noise when the fan was on medium or high, so I simply removed it. Problem solved.

the kit was ok but 95% of it I did not need as all of the larger mixing tubes are the same as the 5 that were installed in the stove top at the factory, the only parts I used were the 5 orifice nozzles and this is upsetting to me to see that these kits are sold as (conversion kits) for 4 times the value as all you need for the conversion from natural gas to lp gas is the orifice nozzles. harumph!

I purchased this tool because I had a very slow dryer, it would take 2 to 3 hours to dry one load. My dryer vent is probably between 18 and 24 feet long, all of which is enclosed inside the wall and ceiling in the laundry room. I was able to clean out the entire vent with the 4 rods included with the kit, by cleaning from the vent on the outside of the house and the access on the inside of the house. I got about 3 grocery bags full of lint out of the vent. Probably 30 years of build up. My dryer time is now down to 45 min a load, rather than 2 to 3 hours. The Lint Eater already paid for itself by reducing the drying time. I highly recommend this to anyone who owns a dryer. You can reduce your dryer time and your energy bill, and also reduce the risk of a dryer FIRE. If I could give this item 10 stars I would.

So very disappointed in this product. This washer had been sitting in my wish list for a number of months as I had been waiting for the right time to purchase it. I am an apartment dweller with no laundry facilities on site, so I thought that this would really help with the in between trips to the laundromat. On the very first use, I noticed that whenever I plugged in and set the timer, the machine would make a very loud noise as if it were attempting to spin, yet nothing happened. This continued on throughout the cycle --no spinning, just a loud clanking noise and my articles of clothing just sitting in soapy water - motionless - not being cleaned. I've given up on trying to get this thing to work and will be shipping it back ASAP!

WHEN THE TWO HUMIDIFIER, WE OF COURSE HAD TO BUY THIS, WE TRIED TO USE, BOTH WERE BROKEN AND IT TOOK OVER 2 WEEKS TO RESOLVE, WHEN WE CALLED ESSICK, THEY TOLD US WE HAD TO CONTACT AMAZON, THEN THEY SAID WE HAD TO CALL ESSICK............ WE ALWAYS SHOP AMAZON, PRODUCTS AND PRICES ARE GREAT. COMMUNICATION IS SO IMPORTANT FOR THAT IS WHAT SELLS, WE WILL SHOP AMAZON BUT WILL CHECK OUT OTHER PRODUCT NAMES. WE WILL BE BACK BUT CAREFUL TO PURCHASE OTHER BRAND NAMES. ITS MY BELIEF ESSICK PRODUCTS HURT AMAZONS REPUTATION..................SANDY

I cannot recommend Electrolux appliances, specifically their double ovens. The ICON professional model that I purchased 4 years ago for $3,500 has been an appalling letdown. The hidden bake element in the upper oven failed twice in a 14 month period. The control board, the relay and the temperature probe also had to be replaced. The bake element overheated to the point it melted fiberglass insulation; it also warped the oven lining and caused the porcelain to splinter, neither of which are repairable. Electrolux has advised me that their warranty on this expensive oven is limited to one year. I have never used the self clean feature because of fear of what could happen; the Electrolux representative, advised not to use it either.

We have just lost our second full freezers worth of food. I shudder to think how much this thing has cost us. Now the repair company told me it needs a new compressor cause it has a freon leak and I've got to spend another $800.00 or $900.00 getting that done but they won't do it. They recommend that I call A&E the factory Whirlpool repair "service" but they have awful ratings and I was not happy with them the last time I had to use them. I bought this because i thought the design was great and that's the most frustrating thing about it. It is! It just can't be trusted and neither can Whirlpool to stand behind it!

The shipping on this product was very good. As soon as got the range hood I plug it in and tested before installing. It worked and surprising it was quite at it highest speed. Installing it was a little complicated only because my house did not have duct work. The vendor Golden Vantage have pre-package an 8" duct that did not work for me. I had to make several trips to Home Depot just get the right ducts. I'm still not completely finish and missing 6" duct that connect from the range hood to the duct outside but the range hood is installed underneath my cabinet and I have to say that it look really good and works amazing. On the side note - It took me a really long time to install by myself. You definitely need two people to install this range hood only because it heavy and needed another pair of eyes. Overall, it's a great product.

Great replacement part and very easy to install. We have a Kenmore 665.13293K115 dishwasher that is only two years old and a few months ago the tabs holding the slider wheels onto the upper rack broke. The upper rack still worked but if you pulled it out more than half way when loaded, the rack would fall and spill dishes everywhere. I ordered this part and it came in two days with Prime. The install only took me about 15 minutes and was very easy, especially after finding a full walkthrough on YouTube. The part is definitely higher quality so hopefully the problem will not recur. It was well worth the $30. Also, I had a T-15 screwdriver bit on hand but if you don't, my box had a Phillips to T-15 adapter so no need to go buy a special tool for this.

This part does not fit my Whirlpool (model KDFE104Dxxx). I wish it did: it is obviously a better made part. To help those wondering if it will fit their dishwasher model: this kit is for top racks whose adjuster wheels travel INSIDE the sliding rail. If your top rack (like mine) clips onto the edge of the rail and travels WITH the rail then this kit will not work. I had no trouble installing the kit but the wheels rode on top of the rails and bumped up against the rail mounts. There was nothing holding the rack down and it would tip over or fall out if pulled too far. Check this against your model before ordering to save some grief. I will have to return this (after reinstalling the broken parts) and order exact replacements for the plastic parts. I can see how these parts are vulnerable to hard use and will be more easy on it now.

Perfect fit for my dishwasher. I was blaming the detergent and/or the water temp for the dishes and glasses not being cleaned well. Imagine my surprise when I noticed two large holes in the supply hose to the middle spray arm. Initially I tried to find only the hose but found the item to be in short supply and too expensive. I finally opted to purchase this replacement. I'm glad I did. The washer is performing well again and at a very reasonable price. The repair took about 10 minutes to perform.

These two are the perfect solution for wine as well as canned drinks. One of the coolers was noisy because the motor was defective. The company replaced the cooler and paid for the return shipping on the defective one. Not a problem at all. These sit in our living room under a bar like cabinet. Everyone knows were the soft drinks are located and they just help themselves. Can't believe all the wine the wine cooler holds. I thought it would not hold that many bottles. But it did easily.

I installed the valve myself. After I mounted it on the humidifier, I set my thermostate for the valve to work, and it did perfectly. When I inspected the valve, I noticed that there wasn't any parts to attached the valve to the humidifier like screws or bolts. When I took off the old valve, the nuts from the bolts fell into the humidifier. I wasn't going to waste my time opening the humidifier and searching for the nuts. Instead, I got the right size self-tapping screws from my inventory of screws and securely installed the valve with them. The morale to this story is that the valve should have come with at least self-tapping screws.

Great replacement for the moldy original gasket in our washer. This one has a design that seems less likely to trap water and gunk in its folds. It is a very fussy/difficult fit, and the one I got did not come with the two white and black jobbers shown in the photo. I ended up using chapstick tubes (noted in another review) to hold the spring in place during the final reassembly (watch a YouTube video or two for the process and that will make sense). Also, use a little (not too much!) dish washing liquid to lube the gasket when stretching it over the metal flanges on the washer. You may want to replace your drain pump (much simpler job) while you have the beast open. Think of it as preventative maintenance. And, lastly, strong hands. You will need strong hands. And a good 3 hours start to finish.

Looks and works OK. Easy to install. Things I don't like: 1. The fan lights are wayyyy to dim to be functional. You might as not have them for all the good they are. (Sellers does not recommend changing the lights out...it will void your 3 year warranty, 2. Manufacture states this unit is 30 inches wide; it is actually is 29.5 inch. My overhead cabinet was made to accommodate a 30 inch standard appliance. 3. Only comes in military time...passe, 4. The front panel indicator lights are signaled however have different colors, ~~~ The time light is a gaudy orange color. Why the different colors when you have highlighted indications for the functions? I recently purchased five other kitchen appliances and they all have a nice blue background light. This manufacture is still living in the dark ages. When I have more time I am going to look around to find a replacement.

This replaced the failing OEM door lock. To replace it is a matter of removing the LG 4 screws for the back lid, sliding it back and off, and undoing the two door lock screws and disconnecting the electrical connector. This was 5 minutes from start to finish with a few sheet metal cuts on the fingers. LG should have put this on their units not the weak one that came with the washer. Amazon- thank you for carrying this part on your store.

The Gardus LintEater Rotary Dryer Vent Cleaning System is well worth the money. It comes with a detailed instruction booklet and the equipment worked as described. My husband installed the protective screen between the vent and the dryer to keep the brush away from the blower motor, removed the vent cover at the other end out back, hooked the LintEater up to his cordless drill, and worked it into the vent segment by segment. Within a few minutes our dryer vent was cleared out and all the lint was piled up in a little pile in the back yard. It worked effectively and flawlessly to clear out our 10-foot-long flexible metal vent--can't ask for better than that.

I have low expectations today for "durable" goods. This LG is quiet. We are a family of three and it makes enough ice for us. The limiting size of my space and my desire for water and ice through the door limited me even more. I did not want just to replace my old fridge but I wanted an upgrade. This is an upgrade. I love the interior light. I like how the controls display is outside. I really like the freezer on bottom, but this brings me to the only drawback for me. I think this is a drawback to the french door design, not this product inparticular. The contiment space in the doors are limited due to the 1. Icemaker in the door and 2. The freezer in the bottom. To me it's a tradeoff that is ok and required me to think of how to organize my condiments.

I have no issue with the exhaust pull, since I have thec1200cfm fan pulling through a 10 inch duct. My problem is that the motor to raise the unit when turned on is too weak to raise the unit. Called service out, he called factory, they said it must not be straight and is binding. We removed the cooktop and made sure the vent was free floating and it still does not work. It will work if I take the filters out, they are quite heavy. Clearly the motor is too weak, but company will not stand behind it. DO NOT BUY CHEAPLY MADE EXPENSIVE PRODUCT

when you try to install, you will have to kind of force the metal flange over the the end that connects to the garbuerator, then fit the black rubber gasket and it is ready to connect. For the other end thats hooks to the drain pipe I had to use a different gasket than the one provided(white colour).The gasket I used for the drain end has a bit of an angle and can slide over the pipe to form a good seal once you hand tighten the plastic nut connector. This tube was easy to install and saved me the big hassle of having to re-do all the plastic drain pipes to have them aligned properly. The thickness of the tube seems a bit on the thin side but time will tell if it leaks. I highly recommend this product. Its been over 9 years since installing and no problems

YAY! Our washer wasn't spinning properly and we weren't sure why but after much research my husband decided it could be a problem with our pump and we decided to try replacing it before spending more money on having someone come and look at it. Unfortunately our washing machine was bought second hand, and there was no model number on it that we could find, so we did our best to match the picture with what we have and the brand with the brand we have and lucky for is it WORKED! Our washer is now working great, and this pump works so quietly! Thank you for making it easy to order! We cloth diaper and being able to order this and have it shipped in two days was exactly what we needed. I hope we have many years of a working washing machine ahead of us. :)

I've been using the Wonder Washer for 5 years now and I just had to buy another one a few months ago when the motor finally went. Its a very good product foiled by cheap screws that will rust pretty quickly. As I did with the older one I opened it up and replaced every screw with its stainless steel counterpart from Home Depot. Hopefully it will last 5 years like the last one. My mother went through 3 of these in the last 5 years and it was usually the water rusting out one of the electric units on the inside. This is a design flaw imho or maybe planned obsolescence at play here. It should have had some water proofing and at least the stainless steel screws. They are not very expensive. I will be doing a waterproofing project with it soon. Overall Id recommend it even with the cheapo screws as it does work GREAT.

my dryer vent goes 30 ft across house, this product comes with 12 foot reach of rods, I ordered a 12 f extension kit and was able to reach most of the way, then I unhooked dryer and ran through from the other direction. This linteater works GREAT. I tightened fittings with 2 vice grips and taped with duct tape one at a time while running in the vent with dryer on. my vent has not been cleaned in 10 years (only tried blowing out with air) this thing works GREAT. unbelievable amount of lint came out. if your thinking of ordering a vent brush this works order one! Just follow directions and don't try to go high speed with all the fittings attached outside the vent (fiber glass rods will whip around and MAY brake) you will be surprised how well it works.

I've owned this for a couple of months now. Only needed to use it once. I have a relatively long (approx 8 feet) vent, and found out that my vent was very cheaply assembled. They used a foil hose inside the wall. Albeit, this product still cleaned it out very well. Setting the torque on my drill very low kept it from tearing up the cheap hose. It loosened and released a TON of lint, but the shop vac just sucked it right up! I have seen some reviews complaining about plastic joints and the overall cheap design of this product. I found all joints and screwholes to be made of metal, and seemingly quite durable. Maybe the design has changed over the years, but mine seems to be of good quality. Again, I have only used it once of yet.

This filter has lasted since 10/2014. I just purchased my 2nd filter for the refrigerator that was originally purchased 5/2013. We drink ALLOT of water and I am the heaviest user of the filtered water. I constantly refill my 750ml water bottle. The flow recently slowed and that's when I ordered a replacement. I am not sure why some reviewers have to change their filter more frequently. Where I live the water comes from a lake and is purified through the city. It is hard water that Is almost palatable if it didn't have so much chlorine in it.

Works as advertised in Kenmore Coldspot side by side. model 106.51562104. It is a little smaller than OEM but still fits. Flushed with a gallon plus of water. Reset the switch and back to green This unit does not state/claim it removes lead or cysts as the OEM model. This is for basic odor/taste treatment and that is all I really want. I don't need to pay for the other features. Time will tell if truly what is says - I am sure it will Shipped quickly

The ice maker in our french door refrigerator doesn't hold much ice. During the summer we go through a lot of ice drinking cold water. This ice machine has been a wonderful addition to our kitchen! Now when our fridge runs out of ice this machine is turned on into action. It quickly makes ice. The noise isn't an issue as we don't leave it on all the time. But it isn't any louder then any other appliance in our home when in work.

I agree with the reviewer who would give this product 0 stars if possible. I have had this dishwasher for a little more than a year and am planning to get rid of it as soon as I can. It has performed horribly since day one: -- does not dry dishes properly -- does not always wash dishes properly --drawers are too small for large or tall platters or pans -- racks are not designed for efficient loading -- and, most recently, I discovered black mold all over the top drawer! This is the worst appliance I have ever owned. I bought it because Kitchenaid had a good reputation. I will never buy a Kitchenaid appliance again based on this experience.

I have bought this product and it works fine for what it is if you remember to change it. I didn't...and my water tasted very ikky and I didn't realise it was the filter not the water...then I came on here to buy a new filter bc I thought mayb e that was it and saw what someone else had posted about a "bypass filter". Its permanent, and you don't have to change it. No more bad tasting water because your filter needed changing!!!My fridge water was VERY slow, now its fast, and it was ikky (my kids wouldnt even drink it) and now it is awesome again...I thought it was my water and it was just that it was an old filter!!!!

I had to buy a bundled video game to get a good price on this amazing knob from Laurey. Amazon offered to separate my order so I could get speedier shipment but I elected to keep it as is. I quickly tired of the game but I still find this accessory as useful now as the day it arrived. A quick search reveals a number of knobs at Amazon, most of which are too large and obtuse. I found the 20226 to be best suited to my needs and would recommend to anyone.

The unit matched the original almost exactly. We have had it in use for about three weeks. Good points: easy to install, started working right away, ice pieces are as before; Unfortunate points: the "lip" down which the ice falls into the bucket below seems extraneous and interferes with reaching into the bucket to get the ice; this unit seems to fill the bucket higher than we expect and we have not seen it actually stop producing ice without our lifting the control arm to stop ice-making manually. Summary: basically a good replacement: just be aware of its possible limitations.