Datasets:

Siki-77

/

Amazon_category_polarity

like 0

Seems to be a lack of quality control. Loose part found in unit (delayed installation). Mfgr. calls unit a "built in", yet the back of the smooth top does not cover the cut edge of granite counter top...bad news. Everything on unit seems cost effective, not consumer friendly; such as loose open element for oven heat with minimual support, tinney drawer below oven, and single indicater light for "hot surface", not specific. Oven door out of square. Cleaning samples, not included as stated. With a Mfgr. suggested retail of l399.00 seems very lacking. Enough said.

I'm liking this hose well enough. It's softer, more flexible, and bigger in diameter than the cheap little stiff plastic hose that came with my Whirlpool washer. I was careful to let it straighten itself out in the warm sunlight when I took it out of the package, thanks to those one-star reviewers who said that it split down the middle right out of the package. I'm guessing they were in cold areas and tried to straighten it a bit too quickly. It does the job nicely, with no leaks. I had to cut it down to the one-inch end size, and lost about four inches of length in doing so. The advertised 8 ft. length apparently includes those parts that many of us have to cut off, because I now have about 7 ft. 8 in. in length, measured from the connection at the washer to the apex of the hook, right where it starts to bend back in the other direction.

I did some checking on the reviews before I bought this water filter , and it's seem to be compatible filter to Samsung but it was not after five months it was leaking and we did not see it leaking from underneath the front of the refrigerator and it ruined four to five planks of my floor. I hope by writing this it will save someone from ruining their floors in the future. I do not recommend this product for a Samsung refrigerator. We found out from a Samsung rep that you must use a Samsung original replacement water filter.

Revising my original review since I just bought the second filter at four months after the first. The first one I purchased is still going strong! Will have one on hand when it gives out. Still Very Happy with this Purchase! Giving this five stars for having no trouble installing and that my water has never come out faster. Also five stars for the cost of this filter versus three times the cost in the big box stores, (which were not even name brand!) Hoping this lasts the six months that it claims...but even if it only lasts four months, it is worth the price difference.

We spent a great deal of time researching our replacement range hood and deciding on the XtremeAir. Most weren't nearly powerful enough to keep up with a busy kitchen. This product moves a great deal of air and does it quietly. LED lights were also important. Lack of energy efficient lighting on other hoods indicated the manufacturers failure to keep up with technology. Upon installation we discovered another feature that was not well described, even in the user's manual: it has an automatic setting that will turn the blower on when a lot of smoke is present. We found that it also promptly turns itself on when a burner is lit and heat is sensed, even adjusting the speed automatically. It also turns itself off. When this auto function button is pushed, all other buttons are inactive. It's easy to switch back and forth between manual and auto. Although there is no cooking timer on board, there is a timer function to turn the hood off automatically.

What can I say, its a stove. Not the best one I've ever owned, but it is functional obviously. The stove is very noisy when preheating the oven. There's been occasions where I have turned the oven off only to turn it right back on, and the temperature is lower than it should have been and it trying to get up to temperature. Comes with a handy temperature probe. Neat shelves in the oven you can remove half of one for a bigger sized pan without having to remove the whole upper shelf is handy. The timer buzzer is extremely loud and annoying. The first time it went off my ferret was walking by and it scared her so bad she dived behind the stove and got stuck between the wall and stove. The black color is hard to keep looking clean and nice. But, hey, it works.

(Dec. 2013) This part was priced far below what GE wanted so I was hoping for the best, but fearing the worst. I was happily surprised that it fit in perfectly, and the leads were the correct ones. The only difference from the stock element was the rests that hold it off the surface of the oven. There is one less on this replacement, but it didn't affect anything. After install everything works like it should. Update (Sep. 2016) Element is still working with no issues.

This compact washing machine is exactly what I was looking for. It does a great job of washing a surprisingly large amount of clothing at one time. 10 T-shirts. That the spinner does not handle the same amount of clothing is the only thing that I wish was different. Being a retired single man, this machine easily takes care of my washing needs. The spin dryer does an excellent job of removing the water from the clothes to the extent that I just hang things on hangers and they are dry within a few hours.

We bought this dryer and it has broken 5 times in the past year (4 in the past three weeks!) Whirlpool will not replace it even though it is under their warranty still. The repairman has fixed the same part every time and Whirlpool customer service says they won't replace it because its not their policy to replace but to fix. Our repairmen is a good guy and has even called them and consulted Whirlpools technicians and they still cant fix it but refuse to replace it. I am in the military and have a wife and three kids and between deployments to Iraq and Afghanistan hoped for some courtesy from the manufacturer on this. My wife is overloaded enough without the hassle of taking her clothes to the neighbors to dry. ESPECIALLY AFTER THE $ WE PAID FOR THIS THING!! DO NOT BUY WHIRLPOOL.

love my panda! I can't figure out how to keep the clothes from hopelessly tangling up (I tried using mesh laundry bags I bought from Amazon but they shredded the first time I used them), but this is not a deal breaker for me. The spin compartment is surprisingly efficient. I live in an apartment building with commercial washers so it is great to be able to sort and wash the laundry the way I want without having to pay for a full load and waste soap to wash, for example, a few items of whites. I can also pre-soak.

I was cautiously optimistic in ordering this product. We're updating the kitchen in our townhouse and are making the switch to stainless steel appliances. I didn't want to pay an arm and a leg for something that was going to stay in the townhouse rather than come with us when we moved, and this vent fits the bill. It's sturdy, fits the space we had for it, and the clean lines looks great. You might have to do some finagling with the screw holes, but we suspect it's because the previous vent was installed poorly rather than this product being designed improperly. This is definitely worth the price.

I've bought this same 3-filter set at least twice before with good outcomes. However, this last batch isn't working for me, as the others did. The filter barely makes it a month and a half. Performing, new-out-of-the-box, as if it were at about 2 months old. The stream used to be firm and flowed great. The new one is slow upon first use. I saw a similar review prior to purchasing it. I still bought it thinking they had a bad batch. But, I'm on filter 2 of 3 of this last purchase, and I still got the same result.

I bought this for a Kenmore dishwasher since it is the same part number. The back of the dispenser is clear plastic, and it had a couple of small cracks in the back. At first I was going to return the item. Then upon closer examination, I figured the cracks were in places that the rinse aid was not going to flow into, so I decided to keep it and install it. The installation was very simple, and I think it sealed up fine to the dishwasher door. Have been using it for a week now, and all is good.

NOT AN EXACT REPLACEMENT! Does not fit. It is very close but doesnt clip into the door like the original. It will Work for light items and is better than missing a shelf but is slightly smaller than it should be. The big clip goes in the door but the piece that is supposed to hold it tightly don't fit. Thus it falls forward and off the door with a slight load. I think I can bend it and force it to fit but if you bend plastic it cracks in half so if you force it and it works it will probably break a short time later. Wish the exact Replacement Parts were the actual replacement parts.

We this unit from Sears and have had nothing but problems with it since the day we bought it. Thankfully we also purchased an extended warranty. We have had to invoke the extended warranty 4 times in two years for the same problem that keeps recurring. One or both ovens gets stuck in "preheat mode" when we bake. It has been a $500 repair each time, fully covered by the extended warranty. Despite this fact, we remain unhappy wiith this range and with the situation

I ordered these covers and they arrived so fast and I was tickled pink with them. I had my other covers for many a long year and my husband and son had hunted high and low for some new ones for me and couldn't locate any of the rectangular ones anywhere, so I was so thrilled when I saw these on your site. The quality is marvellous and they have a relatively high profile which is great because of the higher hotplates I have on my stove top. They seem to have a far sturdier feel to them and don't feel tinny and what's more, they sure do look cute. I have always had a real soft spot for the Pillsbury Boy. And the best part was the price...extremely reasonable!

Beware, the item pictured is NOT the item you will receive. As other users have already stated, the spring in the photo is clearly wound clockwise. The spring you will receive is wound counter-clockwise and will NOT work with an LG french door refrigerator. I have included a photo of the actual spring I received, so you can compare for yourself. I find it very disheartening, based on previous reviews, the seller has been made aware that this listing is incorrect, and has chosen to not take corrective action.

There are a lot of bad reviews when they switched from PUR to this EveryDrop brand. Lot of people said water tastes really bad like soap. So I was very skeptical about using this new EveryDrop brand. But my old PUR filter was getting old and finally decided it was time and to at least give them a try. Surprisingly, I felt there was nothing wrong with it. Water taste just fine. Clean and clear just like the old PUR filters. Not sure where everyone was getting that it taste like soap. Now I do live in Hawaii so the water here is very clean even without a filter. Only thing is that it is on the pricey side... but I would order again.

If you are looking for a dishwasher that actually cleans, this is not the one you want. The water did not get hot, dishes came out dirty, did not dry dishes, cycle was al least an hr long, dishes must be prewashed prior to washing in this dish washer(defeats the purposs of a dishwasher), all in all, the best place to put this is in the trash. I had a hard time giving it away, once I did, it was then passed to at least 3 other people who really could only get a good laugh out of it. A ridiculous piece of equipment.

I had the uL problem with my washer. It would make a horrible noise and rock the house. Would take a couple hours to do one load of laundry. Ordered this product on a Friday it arrived on a Monday. We watched a video and installed it in a matter of 20 minutes or less. One of the rods in my washer was bent. We replaced all four and my washer is working just like it should. Worth the money and I'm telling you easy to install.

Bought in May 2011. From the very first time we used the oven - the top where the burners are gets exceedingly hot and has caused burns on more than one occasion. It has now effected the control panel where the plastic is misshapen and now the Cancel button does not work. Repairman coming today. I never ever had an an oven where I am baking or broiling where I am concerned about getting burned. Previous review shared that Frigidaire was not helpful. Hopeful my extended warantee from store I bought it from will fix the problemSSSS.

Do not buy this Filter. Honeywell decided to take a fantastic filter for the Honeywell HCM-6009 Cool Moisture Console Humidifier and turn it into an inferior product. I KNOW I'm not the only person that has a problem with the redesign. Bring back the Blue Shell Filters. You've removed layers of this filter in order to fit into other devices ; turning this filter into flimsy junk. I keep up with maintenance. I clean everything. Please stop telling me to do this and that's the cause of the filter turning bad. It's not. You are the cause and I recommend to anyone they look elsewhere for a humidifier not made by Honeywell.

I bought 2 of these and an AcuRite 02081M Weather Station. Amazingly, the wireless sensor on all three were able to figure out which base unit they were paired to when I first plugged in the batteries. I was worried about this. But, it was "magic" and it "just worked". They have been working great from that point on. The display is clear & sharp and easy to read in normal room-lighting. It is a little harder to read in lower light (the base units are in the garage) because there is no back-light on the base units. For the price, they are great. The remote sensor works well out to 100' ("real life").

Too small and difficult to use as it has a gravity drain which was impossible for me to set up so I had to send it back if you think it is going to be too small do not take it out of the box it comes in as UPS will not take it back in bubble wrap you have to have a box score and since it is a odd size I had a very difficult time finding a box to fit it but I finally did but since it is so heavy 80 Pounds it is a two pet son lift. I would watch all the videos on this machine before I bought it I did not and I regret it

Probably the most common use for this is to repair the wire going to the heating element of your dryer because the wire melted do to a loose connector to the heating element. Seems to about an 8 gauge wire. The female disconnect is a larger size than what's easily available (again, looks to be about an 8 gauge). Fit perfectly on my Samsung front loading dryer. Minus one star for the price. Absurd to charge 6 or 7 bucks for 6 inches of wire with a crimped connector on it. That said, it's hard to find in non specialty shops, so I guess it is what it is.

I was surprised at how well made these hoses are. The ends are thick and feel well crafted (clean edges, no burrs, joints are solid). The rubber washers are soft and flexible (not old and not cheap). The extra few feet will come in handy with the stacked washer/dryer that I've got in a dedicated closet. I've got to make the connection, slip out the side and then move the unit into the closet... with my waist line, I need all the extra room they can give me! :D

I spilt a small amount of water removing the old GE MWF filter but didn't spill any installing this Supco WF287; clean-up took one paper towel. I had previously filled the Supco with water to minimize "sputter" from air in the lines and it worked -- it doesn't fill all at once immediately; I turned the tap on perhaps a dozen times to run a small amount of water, allow the bubbles to work out, and run another small amount. As a result I didn't experience any sputter, either. Taste initially is not significantly different from the GE (and is better than tap). Recommended.

I can't tell you if this machine can wash dishes or not. I ordered it from Walmart; it's shipped direct. The first unit I got was full of splattered grease or oil inside and the door was dented in. Walmart was very good in having it picked up and replaced ASAP. At first inspection, unit 2 looked good. But as I was ready to wheel it into the kitchen, I noticed that a rubber hose and some other mechanism was hanging out from the bottom, scrapping the floor.(no, this was not the hose that goes to the sink. This is a royal pain in the butt because it's a big appliance and hard to pack and unpack. There is simply no excuse for this shoddy merchandise. Walmart said they'd investigate w/the vendor. They themselves were fine in expediting my return

I bought an icemaker for my fridge only to find out through much research (that took forever) that my fridge didn't even have a water inlet valve. I found out I needed one that looked like this since I didn't have an old one in the fridge to compare it to:&nbsp;<a data-hook="product-link-linked" class="a-link-normal" href="/B004XLEEKO/dp/B004XLEEKO/ref=cm_cr_arp_d_rvw_txt?ie=UTF8">B004XLEEKO</a>&nbsp;I saw a review on this same product from another seller and they said that they required the same part but this one worked for them. It worked for me too! This one has just 1 "plug" for fridges that don't have the water/icemakers in the door (that kind requires the 2 "plugs'). This one works for just an ice maker that you plug into your top freezer.

These parts are NOT original parts as advertised. The shipping was slow from this vendor--came in 5 days later than parts that I ordered at the same time from another vendor. The high temp thermostat is not constructed the same as the original parts and would not mount properly in my Whirlpool dryer. I was able to use the cycling thermostat and it lasted about 6 loads before it proved defective. All-in-all a waste of time and money. These parts are NOT original parts. Buy parts that are labeled "FSP" to be sure you are getting the original parts for your Whirlpool, Roper, Kenmore, or Estate dryer.

Used it to clean an 11 foot horizontal run plastic pipe from the dryer to outside. Ran dryer on air-dry setting and the lint just came flying out, enough to fill a two gallon wash bucket (after I cleaned it up). They have a bag you can buy to put over the end of the pipe to catch the lint and I would recommend it to eliminate the cleanup requirement. Also, wear a dust mask because using this method of cleanup versus the vacuum cleaner method creates a lot of dust at the exit point. Follow the assembly directions for the extension pieces and use electrical tape to prevent them from unscrewing if you inadvertently reverse the drill. (It was very hard for me to control my natural reflex to reverse the drill when pulling the tool out.) Recommend this tool to anyone who has to clean an inaccessible pipe run of more than 2-3 feet.

I did a lot of research before I bought this range, and I kept coming back to this one. It was recommended by Consumer Reports, but I still did some research . It looks great and works great. I had a problem with the first one that was delivered bc it was damaged so we did not accept it. We bought it from Lincoln Direct and they made it right. It was a great price and a great product. I have not used the convection yet, but come the holidays I will. we were a bit disappointed bc we thought it was a 5 burner, when it is only a 4 burner, but it is fine. All in all a great range!!

Great set up. DW wanted a gas cooktop and an electric double oven. This one has it all. It comes with a lot of extras (griddle/grill, wok base, temp probe, etc). The bottom drawer is a warming drawer - but we store baking items in ours. We cooked (err- she cooked) our thanksgiving turkey and it came out great. Note: it does not have backlight knobs (thought it would). Apparently the model that does is the all gas version that looks almost identical

If you own an LG range, you've found the downside of their poorly made knobs. Even worse is the standard $85 per knob price tag usually found on these knobs. These are very nice replacements, at a much more reasonable price! Unlike the originals, these have a metal insert that provides a nice snug fit on the gas valve stem. I would recommend these to anyone who has suffered the "melted knob" syndrome so common on these ranges. EDIT: Every one of the knobs broke within two months. Cheap plastic shafts. I'd look for better replacements

item work very well. Cleaned lint built up for over 20 years. used a good shop vacuum and the job is very easy. went from both directions using a drill and by manual way of just going back and forth with brush. The manual way worked fine cleaning out lots of lint but when going back over using drill on high speed there was a whole new bunch of lint blowing out was like starting out all over again. Well worth it cost with the piece of mind it provided knowing the vent is clear and should not catch fire.

I bought the spin dryer to use in conjunction with the wonder wash. It is as described - a spin dryer. No heat, just a high speed spin cycle that does very well at getting a lot of the water out of the clothes. It has worked very well for me and if you are getting (or have) the wonder wash I would highly recommend this product be used in conjunction with that one. The clothes coming out of the wonder wash are soaking wet and I just put them into this dryer, let it run for 2 minutes or so and they are barely damp when it is done. They air dry in a few hours.

My dispenser cap fell out during a cycle and melted, so the rinse agent kept draining after one load. I went to sears.com to look for a cap and they were like $25.00! The price was outrageous for such a small piece of plastic! I was very nervous about if this would fit my dishwasher since it is a Kenmore, but it turns out that whirlpool makes kenmores. I bought this one based off of looks, and it fits and functions completely perfectly! So if your not sure if it will fit or not, my advice is if it looks like your current cap it most likely will fit.

**UPDATE** The vendor contacted me! They were extremely responsive and sympathetic - they immediately sent out a new unit which works perfectly. Must just now wait to see if the new unit outlasts the old one. Three extra stars for *outstanding* support service!! ---- original review follows ---- I bought this product at the end of June 2017 and by November 2017 the clock display had begun to fail. The attached photo indicates how the multi-segment display has started failing. In other respects, this device seemed to work well, including the outdoor sensor.

Don't buy this unit. It worked great at first and I loved it BUT - it failed after 6 months of use. The water pump that pumps the water up into the freezing compartment is making a very loud noise and it now takes 3 times as long to fill. It is only a matter of time before it is 100% inoperable. There is a reason why there is no "Warranty" information listed on the Amazon listing. Its because there isn't a warranty. Save your money and aggravation and buy something else. Click on the one star reviews and read them. This is a problem with quite a few of these. Amazon should not allow these to be sold. Amazon will get a reputation like e bay if they continue to allow low quality products to be sold here.

Update, not happy with how the company has treated me. I filed a claim to prove their products integrity is subpar. The welds on the sides of the hood are breaking apart (tearing - see photos). This truly is poor craftsmanship. Customer service, well even worse. Not willing to negotiate because I was a couple of months past my 1 year warranty. SO...if you want a product from this company, don't expect them to help if you're past the warranty period, no exceptions. I do not recommend this product to anyone (even if my product was a one time issue, but because of the poor customer relations they provide).

I have a GE electric stove - don't know the model - but the old recepticals looked like the picture shown here on Amazon, so gave it at try. These fit perfectly and the wires are much longer than needed, which is better than being too short. I was able to tuck the extra wire in the back part above the stove where they connect. As long as your old wires are still connected, there's no need for a wiring diagram, just replace as you remove the old ones. It's easy.

All open-coil electric ranges should come with burners like this as standard fitment. The extra elevation is nice for less heat damage to stove parts and drip bowls, but more than that, this burner's frame gives MUCH sturdier support, so the burner (and therefore whatever pot or pan is on it) doesn't rattle around or want to tip over. I suspect this also will greatly lessen the tendency of the burner socket to gradually cook to death, because the socket is now more separated from the hot burner, but that'll take some years to see. It's claimed this burner does not fit GE stoves, but it fit both my GE (from 2009) and my Frigidaire (from 2000) just fine. I do wish they were also available in the small size, but that's less crucial.

I was having issues with my ice maker. They started after I installed my most recent set of water filters. The water was going in fine, but the ice maker would not eject the ice without me taking out the ice container and pushing the button to make the ice eject. This went on until after I used both of the filters that I had previously purchased. I had no reason to think the filter had anything to do with it because water going going into the ice trays just fine. When I installed the first of these three new filters I received (the filters I am reviewing), the ice maker resumed automatically ejecting the ice. Even though I don't know what it could have to do with the water filter, it now works when it wasn't working before. I used to have to remember to eject the ice about every three hours so I could have ice when I needed it. Now I don't have to remember anymore.

This fixed my fridge perfectly but for whatever reason I could not get the new outer plastic assembly that surrounds the fan to not vibrate against the fridge. It may have been caused by the assembly being so new that it was sliding in its locked position as the fan rotated i.e. there was no dirt to help hold it where it needed to be. The fan in my fridge is not balanced so there is some vibration as the fan goes around. I ended up removing the motor unit from the large outer assembly and putting it in the old one I had removed. It now works without any rattle. I was glad I had read the advice of another reviewer who had said that that the assembly was too big and they had done the same.

I read the reviews and tried to convince myself to buy one of the cheaper alternatives, but I couldnt. As you read the reviews you will find one common thread..... from time to time, the non-GE brands will leak or have other problems. The GE brand never does. You could buy the other brands and save a few bucks, but if it gives you trouble, you have to send it back and it will end up costing you the same or more $$. I decided that for me, paying a little more for the one that always worked was worth it.

This is NOT a direct replacement for the genuine Samsung Aqua-Pure DA29-00003G water filter! It doesn't meet any of the stated NSF ratings that are on the genuine filter. You may as well not have a water filter installed using this, or any non-genuine filter. Do yourself a favor, don't waste your time, effort, or money, or even risk your good health on these cheap knock-off filters, and spend the extra on a genuine Samsung Aqua-Pure filter. If you don't believe me, read the NSF standards on the genuine Samsung Aqua-Pure filter.

I bought the Wonder Wash shortly after having a baby because I live in an apartment without laundry facilities. Rather than making constant trips to the laundromat with small loads of soiled baby clothes, I wash them in the Wonder Wash. I use it on my kitchen counter right next to the sink. You only need a tiny bit of detergent and hot water from the tap. I also do a rinse afterwards with cold water and just a few cranks. I wring the clothes out quickly by hand and put them on a drying rack. It cleans clothes quickly and efficiently. It's great for small loads and also is good for delicate items. For me, it's been a real time saver.

I broke this item last fall. Hubby rigged it so I could open door. after a while I had trouble getting washer to work. kept getting LO error code. I searched for part and found it here .. ordered it and it arrived with a few days...very quick. Went to youtube to watch video on replacing part. It was a 2:33 min video and we had new part installed and washer working perfect in less than 10 minutes. It would have cost over $200.00 to have repair person do what we did.

Fits daughters leap pad perfecting and her games and some random toys, she even wears her backpack around the house! She brings her leap pad to Grandma's and likes to bring toys back and forth in it as well as her leap pad. I would have liked the mesh inserts that hold the leap pad and games, the one that holds the leap pad to be a little higher so the leap pad is not falling out of the mesh holder, if that makes sense?.. Other than that i would recommend this to anyone with a child with a leap pad or even the mini iPad.

This is a lovely looking filter which does the job as quickly as it advertises. Firstly it's quite pleasing to look at and secondly it filters as quickly as you can fill it up. Unlike Brita filters wherein you have to wait until the water starts filling in. There's no lag time here. The filter though is removable and can be used in other pitchers and is portable as well. It does say to let it soak in water for the first time before using it at all and after that it's clear, tasty water all the way. Can't go wrong with it.

Nice looking. Broan seems to own this segment so it can be hard to distinguish between loud, quiet, good buttons, and bad models. This model moves air well at a not very loud sound level. I had removed another Broan hood from the kitchen because of it was so loud and barely moved any air (yes I confirmed assembly and proper air flow direction). This one is worth the price and satisfies someone who likes to be able to *talk* to people in the kitchen while it is running on high speed. Arrived with a small crease on front, but box showed no damage. Didn't return because the project needed to be done.

I love this range hood. I had a microwave hood over my stove. It hardly got the cooking odors out of my kitchen. I did not like lifting up food to it or taking hot food out of it, so I got rid of it. We got this because it had a 760 cubic feet per minute fans. None of the fans at Home Depot does that. They all range in the 200 cubic feet range. It is shiny and the lights are very bright for cooking. The fan is 3 speeds. The high is strong and will take out odor fast but I just keep it on low while I am cooking.

I did get this to work, however, it was not a drop in replacement. I had to take the bracket for the solenoids off and flip the terminals 180 degrees so that the wire harness could connect. Also, the tubing on the Whirlpool Model GS6SHAXLL03 fridge was twist on and the SUPCO was push on. So I had to cut the tubing flanges off in order to install. Since I am handy I was able to make this work, but for the average homeowner I don't think they would figure it out. So look at the picture and notice the direction of water connections and Solenoid connectors before you buy!

The interior of this fridge is SMALL because of all the misdesigned shelves .. try fitting condiments into the door!! Good LUCK! They are either crammed in a single open area or the small bottles fit under the butter dish and other obstructions. The glass shelves are so poorly designed that you will swear constatly that you have no place to put a thing. Worse design I have ever had. These are in apartments...by the way. That is why I have no choice. They look great, but are horrible in function. BE SURE not to get one with an ice maker...it takes up 20 percent of the freezer which is already small.

Needed to install washer further away from slop sink and input water. Purchased 10 feet hoses at same time and you can look up my review if you have same need. This drain hose was a bit odd in appearance as I expected something that would install on washer. Instead, this slips over the existing drain hose. I bought two stainless steel hose clamps (the type with screw to tighten clamp-I don't think I would trust the other kind that uses just spring tension)as I was bit concerned about leaking. It does not feel like a really tight fit when slipping the drain hose over the existing washer hose. But, two clamps seem to hold things. Another solution to problem found picking through Amazon's offerings.

Got it on time, works perfectly. Holds alot. The lock should be on the top but it's not terrible it still does it's job. I went ahead and turned the screw before I even plugged it in just because of how many reviews said it wasn't cold enough intially. I did three twists and my beverages are not freezing but perfectly chilled to how I like. I don't have a thermometer but if I went any colder they would be freezing. Waiting to buy another one once they become in stock again. Came with no dents no scrapes absolutely perfect condition. (Maybe I was lucky- but I'm happy about it)

Confirmed to work on JGBP30BEW1WH but needs splicing for broiler. I ordered this re replace the ignition on the broiler. This was much easier to do than the oven/bottom one. You will need to splice the wire because the existing connector does NOT work with the one that came with this. The ceramic wire nut is small and does come off easily. It does seem that it's not really the correct size for the wire gauge. I had to use heat resistant tape to make sure it stayed in place.

I am so glad I bought this. After years of cramming frozen stuff into my freezer and passing good sales due to lack of room, I am now content. This is a perfect size for a small family (there are just two of us). It uses little energy and freezes extremely well, keeps to temperature and absolutely maintains <32 degrees. the footprint is about the same as a washer or dryer, so it fits in a small space easily. Ours is in the basement. It arrived quickly in perfect condition. Have had it several months and no issues, no problems. I will say I noticed yesterday that frost is building up slightly on one wall, but I suspect that's normal. I strongly recommend this, especially at the price. It might qualify for your electric company's energy rebate, but I have't checked that out.

When the plastic disposer flange that came with the setup in my place broke, I was shocked to see the prices of them. I was very happy to find this solid piece of plumbing at such a reasonable price. It installed easily and I'm good to go. Does not come with the rubber insert that covers the drain/disposer innards and the one in the previous flange is too small, so there's another purchase. Update: Changed to 2 stars. 11/13/2014 This thing has scratched up to look a mess. You get what you pay for I suppose. I never found a protective insert that fit either.

Worked somewhat for about 10 months then I got the error and found out there is a catch that needs to be cleaned out. After cleaning out, it worked about three more times then stopped working, rocker arm had broken. The dry lasted around 2 years then stopped heating. We did but another of the same washer because we wanted a matching set. Same thing, it lasted approx 10 months. it is crazy loud during the spin cycle, mildew on gasket even though I air it after each use. Because of the spin power it constantly moves even when its been leveled. I thought this would be a good investment but its not, save your money.

When installing this replacement icemaker be sure to use a small level. If the icemaker is not level the water will overflow and make a mess. Yes I made the mistake so you wont!! The on/off arm is smaller and shaped differently than shown in the picture so I used the old on/off arm. The kit came with several different wire harnesses(4)and two tubes. I didn't need to replace the water tube. All in all this was easy to install and the best price that I found. The manufacture name on the box is Supco (Sealed Unit Parts Co. Inc.). Part name on box is RIM500 Modular icemaker service kit. Replaces: Whirpool 4317943, 978556, Maytag and subzero.

I found this motor after much searching. The original motor that died was a 5KSM51AG 5333 for my 16 year old Kenmore fridge. The few sites that listed that exact motor wanted nearly $200 for it. I can say that even though the RPM is not an exact match and you have to cut off the plug (fridge side) and use wire nuts, the physical size and mounting is an exact match to my original motor. I figure the few extra RPM (old one was only 950 RPM) is not a bad thing. The only negative was the delay in shipping. It could have been USPS tracking but USPS claimed they did not receive the item from the seller for 6 days after the tracking number was generated. It missed the estimated shipping window so my fridge sat with a box fan blowing behind it (cover removed) for a few extra days. Does not reflect on the product so still 5 stars.

I purchased the Mini Countertop Spin Dryer along with the Wonder Wash unit. It seems that there was an error in listing them together so I contacted the folks at the seller, The Laundry Alternative. They were most helpful and made things right in a hurry. The units both work as advertised. The Wonder Wash is easy to operate and gets clothes clean and fresh smelling with the correct amount of detergent. The Spin Dryer does a good job and after spinning for a few minutes my shirts and other items dry easily by hanging them overnight with no other assistance. Socks and heavier items, of course, take a bit longer to dry. But overall I am very satisfied with both machines. Thanks to the folks at The Laundry Alternative for their excellent customer service and handy, useful products.

This OEM ice maker is a direct replacement for many brands including my 16 year old Amana bottom freezer "Sub-Zero" look alike. After a close look at how the old one was installed, I decided it would be easy to install a new one. Total elapsed time was 20 minutes. The only surprise was that the wiring harness was secured to the harness socket in the back wall of the freezer with a zip tie which must be removed before you can disconnect the harness. Once again I have a steady supply of ice.

I bought this thinking it would be great for when we are running errands in case we had an I need a potty moment while driving. I realized 9 times out of ten we went before we left the house or before the store and were never in the car long enough to need it. It would be great for long car rides but it is absolutely amazingly big for the boat! It never crossed my mind but we just spent the day on the boat and I never would have brought the kids if I hadn't had this. It worked great especially with the baggies for inside. My little one was super pumped to hear we had a boat potty. We had a great day. I would absolutely recommend especially for other boaters. It would work for parents in a pinch too.

This unit turned out to be a direct replacement for my broken ice maker. It took me an hour to change out the units but that isn't bad considering I never worked on any appliance before - ever!. The video proved the most helpful. Saved about $160.00 doing this myself. Didn't need the spare parts but that's OK as they could come in handy in the future. Would recommend trying this to anyone who can read and follow directions and has a little common sense.

This thermistor was exactly what I needed for my Samsung DV330 drier. My problem started when the drier would shut down after about 5 minutes and give a "tO" (thermistor open) error on the display. I followed an online service manual to locate this part number, and it was an easy repair. I was able to remove the rear access panel surrounding the vent line and replace the thermistor in about 10 minutes. Fixed the problem! Now I'm ordering a spare. . .

After much research, I selected this exhaust hood because of it's clean stainless steel design and provides up to 600 cfm of exhaust. That's a lot more power than the standard kitchen hoods which are around 200 cfm. Also the sound level is rated very quiet for this size capacity fan. The filter elements are dishwasher safer. My only concern is whether the two lamps under the hood will be bright enough. I haven't installed as yet because my kitchen is presently under demolition. Will report back after installation is completed.

Bought this hood for a kitchen remodel my husband was completing and couldn't be happier with the appearance and function so far! After pricing hoods at local big box home improvement stores I took a leap of faith and bought this due to the positive reviews and the fact that it was able to be installed without venting it to the outside (comes with charcoal filters). Unfortunately this house was placed for sale after remodel and sold in under a week (new owners loved the hood) so I am unable to comment on the long term function of the product, but from our experience we woukd buy again!

I paid premium for this item thinking that it is a genuine article and my peace of mind is worth the extra bucks. For whatever reason, water tastes horrible. I thought it would go away after a while, but well, a month later it still doesn't. I regret buying this item. Update Nov 2016: even the best of us make mistakes. I had not installed the filter properly. I pushed it in and voil, it started to actually filter water. Water came out a bit dark and somewhat oily at first, but after a couple gallons or so it cleared and the taste is great.

We bought a Thermador in 2000. It's not terrible to cook with but the accumulated repair costs have been staggering. One button goes out at least annually for a repair cost of $150. The glass blew out. Overall the repair costs are at or approaching the cost of the range in the first place. It's not a lemon either. That's the really sad part. It just has some really poorly designed parts. I will never buy any Thermador product again. I only write this to help other avoid making the same expensive mistake we did. PS. I do not work for any kitchen appliance company, nor have I in the past.

I have been on the phone a total of 2 hrs 2 calls. I have to pay the postage to send this back as I made 3 batches of ice and the pump went out. I called the warranty and after speaking to someone who obviously cannot understand English, they tell me that once I send this back to be fixed it will take 6-8 weeks for them to either fix or replce. At that point summer will be over, so why do I need it. Very very upset, and I want to let you lnow that I can buy the same thing at Home Depot for $98. My sister just bought one there and she does not have to go through all this hassle. Same machine, same buttons, same size ice, same everything but the name. I paid $152 + tax and shipping, as well as this great good for nothing warranty. Will never buy anything like this again.

The blade had a "Y" shaped crack radiating from its center and it hit the mounting bracket because it was crooked on the shaft. I squeezed the cracks together and aligned the blade. I installed it, turned it on and went outside to check the vent. It only opened halfway on high. I installed the filter. I turned the fan on and the fan blade hit the filter because the blade was mounted too high on the shaft. I had to use a hammer and a large socket to pound the blade down onto the splined shaft. It works. Other than that it is quieter than the original.

Fast delivery. Quality product. Ice maker was getting cold but no water was pumping up and flowing over the ice shelf. Disassembled and replaced this pump that sits in the water pan. Unit hard snaps into the plastic shelf. Force the old one out and snap the new one in. The pump is 12V 1000mA 60Hz. Do not test on a 12V car battery as others have mentioned. After plugging the ice maker in it should fill the water tray and then pump water over the shelf, even with a warm box. Hope this helps.

When I was looking to replace my drip pans, I first bought a set of black porcelain replacements from the grocery store. They looked nice, but they were just slightly too small in diameter to have a perfect fit, so they weren't perfectly centered around the burner. They also had additional notches for the burner to sit in, so the white of the stove top showed through. I wasn't happy with that, so I returned them and did some shopping here on Amazon. I am really glad I found these! They fit perfectly, being the correct diameter so they are perfectly centered, and having no extra notches for the burner. The black porcelain finish is flawless and glossy. My stove looks new again! Such a seemingly small detail has had a fantastic impact on my entire kitchen.

After reading some of the reviews about damages and items not working and such, I was kinda terrified to order this item. HOWEVER, I read enough reviews to know that if it arrived undamaged, it would be a good buy. Well, it arrived well-packaged and undamaged. Took me a couple of days to get the temperature adjusted to where I wanted it, but ended up using the "3" setting to get below zero. It's extremely quiet and I love it. Someone mentioned that the yellow tag was hard to remove. Maybe they had a different vendor or something, because mine came off fine. i would highly recommend this item, even if it had NOT been on sale.

With the instructions from a youtube video, straight forward fix for a top load washer that wouldn't spin or agitate. Ordered a couple just to have an extra on-hand. Hardest part was repositioning the washer's case back on the frame, aligning all the tabs. If your washer will fill and drain, but won't spin or agitate, google for "washer won't spin or agitate" for how-to-do youtube video's, order this part, and do it yourself; you wallet will be grateful. Downside: before, washer would produce a LOUD "clunk" as it switched cycles, allowing me to track its progress. Now, no "clunk"; runs quiet.

I purchased my second Marvel ice machine last October after my first one died. The repair man said, "Don't get another Marvel as you will have problems. We have seen it in the field." I didn't listen to him and bought another. After 4 months my new ice machine stopped working. They couldn't fix it and had to bring it to the shop. The drain pump stopped working and the sprayer needed adjustment as I was getting cloudy and uneven ice. They adjusted the sprayer and replaced the drain pump and now they are telling me it will be two weeks before they can bring it out to me. So this puts me without an ice machine for over a month and 1/2 on what was basically a brand new machine. I called customer service and they said there is nothing I can do. This is UNACCEPTABLE!!!!!!!

We were doubtful that this would actually fix the continual balance issue with our Cabrio washer but decided to give it a try as a less expensive option to replacing the whole tub/basket. I have washed over a dozen loads since with no issues - even loads that were obviously unequally distributed at the end of the cycle. When replacing the rods, we discovered that one of the old ones was bent. There is no way to know if that was the cause of the whole problem or a result of some other issue. The You Tube video at https://www.youtube.com/watch?v=9E0bzeMRGlI was very helpful as the instructions that came with the parts were not detailed. The whole repair process took less than half an hour. We have learned to check Amazon's pricing on most anything we buy - this part was almost $30 less here than the least expensive appliance part website.

These filters restrict air flow in my Kenmore humidifier. The result is that the motors have to work harder and they overheat - the odor of melting insulation was my first clue. I also removed the cover and placed my hand on each motor and they were definitely very hot (ruling out that I had one faulty motor). For a quick fix I 'bowed' one filter in each side, breaking the airflow seal to allow more airflow and reduce stress on the motors. This helped but, of course, breaking the airflow seal kind of defeats the purpose of drawing air THROUGH wet filters for humidification. I do like the construction of the product - maybe they work out better in other manufacturers units. For me it's back to the OEM filters.

If I wrote a review the week I got this wick, I would have written that it was a fine OEM replacement wick and given it a all the stars that went along with that. But a few months later, this is not the case. It turns out that these are low quality humidifier wicks that disintegrated into goo within two months. The whole thing didn't disintegrate, but large patches of it turned to goo -- like dissolved paper or whatever the pad is really made out of. The OEM wick worked for almost two years in the same spot in the same house at the same humidifier settings before mineral buildup diminished the humidifier output. Additionally, these wicks did not fit into the lasko humidifier they were sold for. They are about half an inch out of size in each dimension. If you get them wet, they soften up and can be worked into the wick holder, but they still don't fit well.

I am replacing a two year old Whirlpool Cabrio that had more problems than were worth fixing. I felt it was time to go back to an old style machine with mechanical timers. There is no better unit then the Speed Queen line. It is installed and works great. My neighbors are wondering why there's a brand new looking Whirlpool on my lawn and I'll be glad to tell them what a piece of junk it was. The people at hCcost that provided the unit were great in making sure that we got the order when it was promised. No more trips to the laundry mat for my wife. She loves here "new old style machine". Thanks Amazon...

This product is not the right size for an Emerson HDC-12. The filters are 1/2 the thickness of previous filters I've used with my Essick Moist Air humidifier and the length is 1 inch shorter. These filters are too small and flimsy to fit securely in their holders. It's been unusually warm here this fall, so I'm just getting around to trying them. It's just past the return date so I'm now stuck with this junk.

DO NOT BUY. This is a late review. Bought one for my PSS27NGPA in 11-2014. After install, my Expressthaw never worked again. The following year, my ice dispenser started working intermittently, followed by the water. I've been buying bottled water for 3mo now. Finally, both the fridge and freezer stopped cooling Friday, and I had to throw out $200 in organic meats because the temp hit 62 by Monday. I just bought a replacement board from GE yesterday, explained my situation, and they discounted their board to $50 + overnight shipping. After installing today, everything works again. You can see the burnt capacitors in the attached pic. Do not buy, stick to a GE board.

There are two types of humidifier wicks out there. This is the good type. The cheap type takes a piece of material, perforates it and then stretches it out to form a honeycomb pattern. It takes only a few pieces to make a wick. Because so little material is used, it doesn't take long for this type to clog with minerals and need replacing. They only last a month for me. But this product is the good type which takes many pieces of material and glues them together. This greater amount of material allows for more water to wick up, humidification occurs more quickly and the wick last me almost five months before needing replacement.

I've purchased this twice. The first product worked great (5 star). The second purchase would be okay (3 star). While it seems to work, I won't buy again. Once installed, I can't get my "water" light to go off (keeps reminding me to change the filter, even though I did with this one). I've unplugged my fridge, and restarted. I've taken the filter and re-installed twice. Nothing works. Great price though!

It's a dishwasher and just having one is enough for me. It's a pretty easy set up. My only complaints are the beep to let you know it's finished is too quiet and you're supposed to open the dishwasher to air it out after it's done.. So there have been a few times I didn't hear the beep and left it closed longer than the product said I should have. No harm came to the washer because of it. Also, despite the use of jet dry some of my dishes particularly my clear plastic cups come out foggy. If you were thinking of putting big pots and pans into this dishwasher, think again.. It's meant mostly for silverware, cups, bowls, plates.. Ect. I've always washed my pans by hand anyway. Otherwise, I'm really happy with this product. It came quickly, shipped well and it does its job.

We purchased this fridge on 11/5/2015 from our local Appliance dealer and paid $1.799 for it. Within one month of owning it, the ice maker started having problems relating to making ice. The unit went from making about 3 pounds of ice a day (filling the storage bucket) to only dropping ice (6 cubes) once a day. After a replacement ice maker was installed, within 2 weeks we noticed a significant drop in the amount of ice being made. Now about 12 cubes of ice per day are being made. We received a BRAND NEW replacement of the same model on 4/5/16. Within one week we experienced the SAME ice maker issues. If you are looking for a fridge that makes ice, DO NOT BUY THIS ONE. If you want a fridge that has a good solid energy efficiency, has lots of storage, but you don't care about ice, then this is a gem. 1 star.

We bought ours from a local big-box - and saved quite a bit as they were on sale. But with regard to the product most people go here to buy - so here is where I'll review. When the units are stacked - as they are at my house - you cannot read the dial on the dryer if you're even near average height (I'm 5'5", my husband is 6' and he's just able to see it). they do require a lot more space than we anticipated ... so be sure you measure twice before you buy. in addition to the extra space, leave about 6-8" for the dryer vent tube ... it takes up a lot of space too. We really like the product though - we've run several wash & dry loads and have had no issues. I hope they hold up for the long-term!

Really impressed with the quality of these spill guards. There are more translucent than expected which is a bonus and they are very supple. As a result, they stick really really well to the counter top, so much that you have to peel the whole thing up to move it which is great. Also really easy to cut with scissors if you need to trim to size. I trimmed mine around the front edge of my gas stove. Time will tell if these hold up to the side burner heat. Will update if any change in my current 5 star rating.

Been using it for more than a year--handles a single man's laundry needs only running it one day a week, maybe two loads if I'm doing sheets or whites separately. Drip dry or throw them into the dryer after spinning them... good for small spaces that have a dedicated area to set the machine above drain level so that water flows out properly. I used it primarily in the bathtub, filling it from the flexible shower head and then draining into the tub. Removing from tub after use out of my way.

Bought the repair kit and it was on my doorstep less than a week later. Kit was pretty straight forward for me as I had already ripped the ice maker apart a couple times trying to correct it before knowing about this replacement kit option. The included directions are poor at best -- decently written but the accompanying pictures were atrocious to follow. If you have a mechanical aptitude, you will be able to muddle your way through this install though. After the install, no more dripping water from the ice maker so I have to give the fix itself a 5. I am, however, disappointed in Whirlpool! The repair kit instructions had a 10/05 date on them and my fridge was manufactured in 01/06!! One would think that a major supplier would have corrected the problem knowing of the problem.

Just pick up my washer from the mail , it came on time package was perfect and I was so excited to try this washer and to my surprise it worked excellent and I just love it and I'm excited to tell others about it. Will be perfect in the winter, I washed two loads and they came out perfect, hope it last for a long time. It's just like a big washing machine , yaaay no more hassle to the laundry weekly only to do big things like towels blankets etc...... Love my purchase !!

It is amazing how well this worked. I have a 30 foot vent run and I didn't want to clean from both sides, so I used two sets of extensions. I had no trouble pushing the brush through the entire length with two 90 degree turns. One tip: I used a shop vac as a blower starting from the dryer side and pushed towards the outside. For such a long run, I noticed that the blower actually helped push the brush along and keep it straight. When I tried pushing without the shop vac running the brush started jamming in the pipe. This is an outstanding product and I can recommend it without reservation.

DO NOT BUY FOR USE WITH STANDARD TRASH COMPACTORS!!! These bags are several inches too narrow to fit a standard (KitchenAid) trash compactor. Every other brand I've ever purchased fit easily. These require a major battle. To make it fit, I must put a foot inside the top 6 inches on one corner and pull with both hands to stretch it until it visibly thins, then still wrestle it over the top corners of the compactor bin. It seems like someone's idea of a bad joke. On the plus side, they are unscented. I'll just use them up but never purchase again.

Our KitchenAid 'fridge/freezer was making a REALLY loud and obnoxious noise, so I pulled off the grill and looked to see if I could figure out what was wrong. By turning on and off the power, I could see and hear that a fan was making the noise. I Googled the manual (no longer had it) and looked up the part needed. Arrived in 2 days and took about 5 minutes to replace; I figure I saved about $200 for a service call. Awesome!

I have a Samsung fridge and I love it! When it came time to replace my filter and I saw the price of a Samsung replacement of $50, I about lost it. I came across these and purchased two of them. They fit perfectly and I cannot tell a difference in water taste, clarity or quality compared to the Samsung filter. Id almost say it it likely the same company makes this filter for both companies and one has a different label. Marketting is funny that way, but this product works great!

I love this product. It works great at removing the lint from the dryer and the duct work. I also bought the extensions which also worked out great because the house I just bought has 18 feet worth of duct work. The ends fit in my drill with some play so it's a tight fit. The only bad thing I have to say about this is that the Shop Vac attachments didn't fit on the shop vac hose that I have. Other than that it is a great product.

Maytag makes a crappy dishwasher these days, coasting on their reputation from years ago. Then when a problem rears its head, they will not stand behind their product. Instead they suggest a service call which might cost far more than putting the money toward a replacement with another brand. Look at Consumer Reports and avoid Maytag. So the weak handle on my Maytag breaks regularly and I bought spares at six dollars apiece and changed them out when necessary. Now they stop production as they replace it with this three times more expensive 'fix' for this dilemma. The service from this seller was A-1 for a quickly shipped and received new part as described. Could not have asked for more!

I've had an excellent experience with my Essick humidifier. I purchased it 15 yrs ago and it is still running strong. I live in the desert AND have hard H2O I change my filter every 3 mos at least. I sleep better with the moist air, not to mention what moisture does for your skin. I also have an ultrasonic humidifier next to me on my night stand, so I really reap the benefits of clear sinuses AND moisturized skin. Thank you Essick! I love this product! Anyone living in the southwest should have one in their bedroom and major living space.