README.md

metadata

base_model: Snowflake/snowflake-arctic-embed-m
datasets: []
language: []
library_name: sentence-transformers
metrics:
  - cosine_accuracy@5
  - cosine_accuracy@10
  - cosine_precision@5
  - cosine_precision@10
  - cosine_recall@5
  - cosine_recall@10
  - cosine_ndcg@5
  - cosine_ndcg@10
  - cosine_mrr@5
  - cosine_mrr@10
  - cosine_map@5
  - cosine_map@10
pipeline_tag: sentence-similarity
tags:
  - sentence-transformers
  - sentence-similarity
  - feature-extraction
  - generated_from_trainer
  - loss:CoSENTLoss
  - dataset_size:7232
  - loss:WeightedMultipleNegativesRankingLoss
widget:
  - source_sentence: >-
      , antenna, or other sensor to attain mission performance levels that

      currently cannot be achieved by a monolithic satellite. Most aspects of
      this concept have been widely studied, but

      the first implementation has yet to be realized, with the exception of a
      few initial experiments.

      A distributed satellite system taxonomy is shown in Fig. 1 with a
      discussion of current and planned systems to

      follow. At the end of this section, a candidate distributed space mission
      is presented as a common reference for

      Table 1 presents a selection of current distributed satellite systems,
      grouped in the four typical mission

      categories
    sentences:
      - >+
        What is the precision that the system is aiming for in terms of tracking
        error?

      - >+
        What is the main challenge in implementing a distributed satellite
        system?

      - >+
        Who are the authors of the NASA document "Space Radiation Cancer Risk
        Projections for Explorative Missions: Uncertainty Reduction and
        Mitigation"?

  - source_sentence: >-
      :250,000 scale for regional context) . Near-term efforts should focus on
      high-priority locations .

      [16] Terrain hazard (e .g ., slope, surface roughness), line-of-sight (i
      .e ., viewshed), and time-dependent

      illumination maps at appropriate scales (e .g ., best-available supported
      by the data) are high-priority derived products essential in mission
      planning, and they should be made available as soon as possible .

      [17] South polar data products could be initially controlled to coarser
      data and known surface reference points to support early Artemis missions
      and other surface activities, but establishment of a local control network
      applied to all necessary data layers would facilitate interoperability and
      provide more precision for specific sites .

      Higher-order data products are tied to controlled foundational data and
      are derived from source data, such as measurements of elemental abundance,
      temperature or reflectance at multiple wavelengths, observations of solar
      illumination, and output from space weather models . Higher-order data
      products derived from these source data will play an essential role in
      planning and executing south polar missions . Planning the science
      activities to be carried out on the lunar surface will be based on these
      higher-order data products, and, in turn, the science returned by those
      activities will be used to update those same products . For example,
      geologic maps based on remotely sensed data prior to early Artemis
      landings will be a likely outcome of site assessments and will form the
      critical basis for traverse plans and planning of science tasks . The
      observations, samples, and measurements made during Artemis surface
      activities will feed back into updating the geologic maps, to the benefit
      of future crewed or robotic missions to the same area . Similarly,
      resource maps will drive the selection of landing sites for missions
      focused on resource discovery, characterization, and utilization, and the
      findings of those missions will be used to iteratively update the resource
      maps . In these cases, and others
    sentences:
      - >+
        What are the specifications of the Theia imager that make it suitable
        for quantitative remote sensing studies?

      - |+
        Who supported the first study?

      - >+
        What are the essential derived products in mission planning, and why are
        they crucial for south polar missions?

  - source_sentence: >-
      , there are still

      some challenges to be overcome it is shown that it is possible to perform
      such links. Furthermore,

      recommendations for future operations of optical links were provided.

      FLP is also integrated in the educational aspects of the Institute. Many
      future aerospace engineers were

      trained for satellite operations and Earth Observations and the satellite
      will be used to train operators

      Further investigation of the Attitude Control is required for the
      stabilization of the optical links on

      other G/S as Oberpfaffenhofen. However, future projects might benefit from
      more standardization on

      the side of G/S Feedback for optical links. Overall Flying Laptop is a
      stable platform for technology demonstration, Earth Observation, and ed-

      588. [Online]. Available
    sentences:
      - >+
        What are the remaining challenges that need to be addressed for the
        successful implementation of optical links?

      - >+
        What are the benefits of enhancing the radiometric resolution of VLEO
        satellite systems?

      - >+
        What is the reason for using the uncoupled approach for the radiation
        calculations in this study?

  - source_sentence: >-
      : they are visible on the waterfall plots with a very high amplitude.
      Moreover, some peaks appear on waterfall plots while they are not

      visible on zero speed curves. These peaks correspond to first order
      unbalance, engine orders or wheel eigenmodes. By repeating the tests with
      different configurations (without ventilation, changing the axes, etc...),
      conclusions have been made and are presented in table 4.

      It is necessary to check if the modes presented in table 4 do not cross
      the order 1 unbalance or the rocking mode. The visible lines starting from
      the origin and evolving with the rotation speed of the wheel are the
      engine orders due to the imperfections of the wheel. When they cross modes
      of the wheel, the amplitudes corresponding to the crossing are much higher
      as we can clearly see in Table 2, on the x axis waterfall plots at 1050 Hz
      and 4000 RPM. The waterfall plots allow to have a global view on the wheel
      structure. By looking at these curves, two wheels can be compared. For
      example, higher amplitudes on engine orders mean that the wheel has
      defects. Moreover, a shift of the rocking mode means that the parameters
      of the wheel are different as shown in equations 4.

      Table 3 summarizes the static and dynamic unbalances calculated on three
      wheels. We notice that they all have the same order of magnitude.
      Environmental vibration and shock tests can vary this value by damaging
      the wheel. On the other hand, bearing defects can be reduced when the
      wheel is continuously rotated due to the running-in process, which can
      decrease the unbalance value. In general, environmental testing has more
      impact than running-in.

      When the frequencies are low, the wheel has no trouble following the
      setpoint. At high frequencies, the wheel follows the setpoint but with a
      loss of amplitude and a phase shift
    sentences:
      - >+
        What are the peaks that appear on waterfall plots but not on zero speed
        curves?

      - >+
        Why is separately scheduling the imaging and download tasks a natural
        choice for real-world complex systems?

      - |+
        What are the dominant orbit determination uncertainties?

  - source_sentence: >-
      : Block diagram of the 7-band CCD-in-CMOS TDI sensor. Each TX slice has
      two serializers and its own PLL.

      The CCD bands operate continuously and time interleaved. The output stages
      for the CCD arrays are implemented both at the top and bottom of each band
      to support the bi-directional operation. All 14 output stages in one
      column are connected to one delta-sigma column-level ADC with digital CDS
      implemented in the digital decimator. The outputs of every 128 ADCs are
      serialized to one of 32 LVDS outputs. Two clock signals are also provided
      via LVDS to synchronize the channels. These outputs are capable of running
      at an aggregate data rate of >50Gb/s using on-chip PLLs.

      The sensor has been processed for Back-Side Illumination and it has been
      packaged in a custom ceramic PGA package. Figure 15 shows a picture of the
      sensor with its 7 bands. The figure shows the front-side and back-side
      versions of the chip side by side.

      (a) (b) Figure 15: 7-band CCD-in-CMOS TDI chip photograph. FSI shown only
      for reference (a) and BSI version (b).

      As a proof-of-concept, an RGB butcher-brick filter has been used as glass
      lid for the sensor, to enable multicolor TDI, although filters may be
      processed directly on the wafer as well [9]. The sensor,

      camera system and a color image captured from the setup are depicted in
      Figure 16, providing evidence that multispectral TDI is viable with the
      sensor.

      Figure 16: Colour TDI image captured from the sensor, sensor with RGB
      color filter and camera set-up.

      Table 3 below shows a comparison of different TDI sensors, including the
      first iteration of our sensor.

      Integrated drivers

      The measurements on the first iteration of the SoC verified
    sentences:
      - |+
        What is the primary objective of the Zodiac Pioneer Mission?

      - |+
        What is the main topic of the papers listed in the context?

      - >+
        What is the aggregate data rate of the outputs of the 7-band CCD-in-CMOS
        TDI sensor?

model-index:
  - name: SentenceTransformer based on Snowflake/snowflake-arctic-embed-m
    results:
      - task:
          type: information-retrieval
          name: Information Retrieval
        dataset:
          name: dim 768
          type: dim_768
        metrics:
          - type: cosine_accuracy@5
            value: 0.8407960199004975
            name: Cosine Accuracy@5
          - type: cosine_accuracy@10
            value: 0.8843283582089553
            name: Cosine Accuracy@10
          - type: cosine_precision@5
            value: 0.16815920398009948
            name: Cosine Precision@5
          - type: cosine_precision@10
            value: 0.08843283582089552
            name: Cosine Precision@10
          - type: cosine_recall@5
            value: 0.8407960199004975
            name: Cosine Recall@5
          - type: cosine_recall@10
            value: 0.8843283582089553
            name: Cosine Recall@10
          - type: cosine_ndcg@5
            value: 0.749593576396566
            name: Cosine Ndcg@5
          - type: cosine_ndcg@10
            value: 0.7638900783774348
            name: Cosine Ndcg@10
          - type: cosine_mrr@5
            value: 0.7189676616915421
            name: Cosine Mrr@5
          - type: cosine_mrr@10
            value: 0.7249965450525153
            name: Cosine Mrr@10
          - type: cosine_map@5
            value: 0.7189676616915422
            name: Cosine Map@5
          - type: cosine_map@10
            value: 0.7249965450525152
            name: Cosine Map@10
          - type: cosine_accuracy@5
            value: 0.9198717948717948
            name: Cosine Accuracy@5
          - type: cosine_accuracy@10
            value: 0.9551282051282052
            name: Cosine Accuracy@10
          - type: cosine_precision@5
            value: 0.18397435897435896
            name: Cosine Precision@5
          - type: cosine_precision@10
            value: 0.0955128205128205
            name: Cosine Precision@10
          - type: cosine_recall@5
            value: 0.9198717948717948
            name: Cosine Recall@5
          - type: cosine_recall@10
            value: 0.9551282051282052
            name: Cosine Recall@10
          - type: cosine_ndcg@5
            value: 0.786039298615645
            name: Cosine Ndcg@5
          - type: cosine_ndcg@10
            value: 0.7975208279742617
            name: Cosine Ndcg@10
          - type: cosine_mrr@5
            value: 0.740758547008547
            name: Cosine Mrr@5
          - type: cosine_mrr@10
            value: 0.7455369861619862
            name: Cosine Mrr@10
          - type: cosine_map@5
            value: 0.740758547008547
            name: Cosine Map@5
          - type: cosine_map@10
            value: 0.7455369861619863
            name: Cosine Map@10
      - task:
          type: information-retrieval
          name: Information Retrieval
        dataset:
          name: dim 512
          type: dim_512
        metrics:
          - type: cosine_accuracy@5
            value: 0.8345771144278606
            name: Cosine Accuracy@5
          - type: cosine_accuracy@10
            value: 0.8781094527363185
            name: Cosine Accuracy@10
          - type: cosine_precision@5
            value: 0.16691542288557212
            name: Cosine Precision@5
          - type: cosine_precision@10
            value: 0.08781094527363183
            name: Cosine Precision@10
          - type: cosine_recall@5
            value: 0.8345771144278606
            name: Cosine Recall@5
          - type: cosine_recall@10
            value: 0.8781094527363185
            name: Cosine Recall@10
          - type: cosine_ndcg@5
            value: 0.7384076037005772
            name: Cosine Ndcg@5
          - type: cosine_ndcg@10
            value: 0.7524024562602603
            name: Cosine Ndcg@10
          - type: cosine_mrr@5
            value: 0.7060530679933663
            name: Cosine Mrr@5
          - type: cosine_mrr@10
            value: 0.7117739674642659
            name: Cosine Mrr@10
          - type: cosine_map@5
            value: 0.7060530679933666
            name: Cosine Map@5
          - type: cosine_map@10
            value: 0.7117739674642659
            name: Cosine Map@10
          - type: cosine_accuracy@5
            value: 0.907051282051282
            name: Cosine Accuracy@5
          - type: cosine_accuracy@10
            value: 0.9519230769230769
            name: Cosine Accuracy@10
          - type: cosine_precision@5
            value: 0.1814102564102564
            name: Cosine Precision@5
          - type: cosine_precision@10
            value: 0.09519230769230767
            name: Cosine Precision@10
          - type: cosine_recall@5
            value: 0.907051282051282
            name: Cosine Recall@5
          - type: cosine_recall@10
            value: 0.9519230769230769
            name: Cosine Recall@10
          - type: cosine_ndcg@5
            value: 0.7793612708940784
            name: Cosine Ndcg@5
          - type: cosine_ndcg@10
            value: 0.7942949173487753
            name: Cosine Ndcg@10
          - type: cosine_mrr@5
            value: 0.7363247863247866
            name: Cosine Mrr@5
          - type: cosine_mrr@10
            value: 0.7427375864875867
            name: Cosine Mrr@10
          - type: cosine_map@5
            value: 0.7363247863247864
            name: Cosine Map@5
          - type: cosine_map@10
            value: 0.7427375864875865
            name: Cosine Map@10
      - task:
          type: information-retrieval
          name: Information Retrieval
        dataset:
          name: dim 256
          type: dim_256
        metrics:
          - type: cosine_accuracy@5
            value: 0.8146766169154229
            name: Cosine Accuracy@5
          - type: cosine_accuracy@10
            value: 0.8631840796019901
            name: Cosine Accuracy@10
          - type: cosine_precision@5
            value: 0.16293532338308458
            name: Cosine Precision@5
          - type: cosine_precision@10
            value: 0.08631840796019902
            name: Cosine Precision@10
          - type: cosine_recall@5
            value: 0.8146766169154229
            name: Cosine Recall@5
          - type: cosine_recall@10
            value: 0.8631840796019901
            name: Cosine Recall@10
          - type: cosine_ndcg@5
            value: 0.7159371426767726
            name: Cosine Ndcg@5
          - type: cosine_ndcg@10
            value: 0.731814701526023
            name: Cosine Ndcg@10
          - type: cosine_mrr@5
            value: 0.6826907131011605
            name: Cosine Mrr@5
          - type: cosine_mrr@10
            value: 0.6893587617468213
            name: Cosine Mrr@10
          - type: cosine_map@5
            value: 0.6826907131011608
            name: Cosine Map@5
          - type: cosine_map@10
            value: 0.6893587617468214
            name: Cosine Map@10
          - type: cosine_accuracy@5
            value: 0.8846153846153846
            name: Cosine Accuracy@5
          - type: cosine_accuracy@10
            value: 0.9455128205128205
            name: Cosine Accuracy@10
          - type: cosine_precision@5
            value: 0.1769230769230769
            name: Cosine Precision@5
          - type: cosine_precision@10
            value: 0.09455128205128205
            name: Cosine Precision@10
          - type: cosine_recall@5
            value: 0.8846153846153846
            name: Cosine Recall@5
          - type: cosine_recall@10
            value: 0.9455128205128205
            name: Cosine Recall@10
          - type: cosine_ndcg@5
            value: 0.7547512036424451
            name: Cosine Ndcg@5
          - type: cosine_ndcg@10
            value: 0.7747939646301274
            name: Cosine Ndcg@10
          - type: cosine_mrr@5
            value: 0.7107905982905985
            name: Cosine Mrr@5
          - type: cosine_mrr@10
            value: 0.7192778286528287
            name: Cosine Mrr@10
          - type: cosine_map@5
            value: 0.7107905982905982
            name: Cosine Map@5
          - type: cosine_map@10
            value: 0.7192778286528286
            name: Cosine Map@10

SentenceTransformer based on Snowflake/snowflake-arctic-embed-m

This is a sentence-transformers model finetuned from Snowflake/snowflake-arctic-embed-m. It maps sentences & paragraphs to a 768-dimensional dense vector space and can be used for semantic textual similarity, semantic search, paraphrase mining, text classification, clustering, and more.

Model Details

Model Description

• Model Type: Sentence Transformer
• Base model: Snowflake/snowflake-arctic-embed-m
• Maximum Sequence Length: 512 tokens
• Output Dimensionality: 768 tokens
• Similarity Function: Cosine Similarity

Model Sources

• Documentation: Sentence Transformers Documentation
• Repository: Sentence Transformers on GitHub
• Hugging Face: Sentence Transformers on Hugging Face

Full Model Architecture

SentenceTransformer(
  (0): Transformer({'max_seq_length': 512, 'do_lower_case': False}) with Transformer model: BertModel 
  (1): Pooling({'word_embedding_dimension': 768, 'pooling_mode_cls_token': True, 'pooling_mode_mean_tokens': False, 'pooling_mode_max_tokens': False, 'pooling_mode_mean_sqrt_len_tokens': False, 'pooling_mode_weightedmean_tokens': False, 'pooling_mode_lasttoken': False, 'include_prompt': True})
  (2): Normalize()
)

Usage

Direct Usage (Sentence Transformers)

First install the Sentence Transformers library:

pip install -U sentence-transformers

Then you can load this model and run inference.

from sentence_transformers import SentenceTransformer

# Download from the 🤗 Hub
model = SentenceTransformer("federicovolponi/Snowflake-snowflake-arctic-embed-m-space-sup")
# Run inference
sentences = [
    ': Block diagram of the 7-band CCD-in-CMOS TDI sensor. Each TX slice has two serializers and its own PLL.\nThe CCD bands operate continuously and time interleaved. The output stages for the CCD arrays are implemented both at the top and bottom of each band to support the bi-directional operation. All 14 output stages in one column are connected to one delta-sigma column-level ADC with digital CDS implemented in the digital decimator. The outputs of every 128 ADCs are serialized to one of 32 LVDS outputs. Two clock signals are also provided via LVDS to synchronize the channels. These outputs are capable of running at an aggregate data rate of >50Gb/s using on-chip PLLs.\nThe sensor has been processed for Back-Side Illumination and it has been packaged in a custom ceramic PGA package. Figure 15 shows a picture of the sensor with its 7 bands. The figure shows the front-side and back-side versions of the chip side by side.\n(a) (b) Figure 15: 7-band CCD-in-CMOS TDI chip photograph. FSI shown only for reference (a) and BSI version (b).\nAs a proof-of-concept, an RGB butcher-brick filter has been used as glass lid for the sensor, to enable multicolor TDI, although filters may be processed directly on the wafer as well [9]. The sensor,\ncamera system and a color image captured from the setup are depicted in Figure 16, providing evidence that multispectral TDI is viable with the sensor.\nFigure 16: Colour TDI image captured from the sensor, sensor with RGB color filter and camera set-up.\nTable 3 below shows a comparison of different TDI sensors, including the first iteration of our sensor.\nIntegrated drivers\nThe measurements on the first iteration of the SoC verified',
    'What is the aggregate data rate of the outputs of the 7-band CCD-in-CMOS TDI sensor?\n\n',
    'What is the primary objective of the Zodiac Pioneer Mission?\n\n',
]
embeddings = model.encode(sentences)
print(embeddings.shape)
# [3, 768]

# Get the similarity scores for the embeddings
similarities = model.similarity(embeddings, embeddings)
print(similarities.shape)
# [3, 3]

Evaluation

Metrics

Information Retrieval

• Dataset: dim_768
• Evaluated with InformationRetrievalEvaluator

Metric	Value
cosine_accuracy@5	0.8408
cosine_accuracy@10	0.8843
cosine_precision@5	0.1682
cosine_precision@10	0.0884
cosine_recall@5	0.8408
cosine_recall@10	0.8843
cosine_ndcg@5	0.7496
cosine_ndcg@10	0.7639
cosine_mrr@5	0.719
cosine_mrr@10	0.725
cosine_map@5	0.719
cosine_map@10	0.725

Information Retrieval

• Dataset: dim_512
• Evaluated with InformationRetrievalEvaluator

Metric	Value
cosine_accuracy@5	0.8346
cosine_accuracy@10	0.8781
cosine_precision@5	0.1669
cosine_precision@10	0.0878
cosine_recall@5	0.8346
cosine_recall@10	0.8781
cosine_ndcg@5	0.7384
cosine_ndcg@10	0.7524
cosine_mrr@5	0.7061
cosine_mrr@10	0.7118
cosine_map@5	0.7061
cosine_map@10	0.7118

Information Retrieval

• Dataset: dim_256
• Evaluated with InformationRetrievalEvaluator

Metric	Value
cosine_accuracy@5	0.8147
cosine_accuracy@10	0.8632
cosine_precision@5	0.1629
cosine_precision@10	0.0863
cosine_recall@5	0.8147
cosine_recall@10	0.8632
cosine_ndcg@5	0.7159
cosine_ndcg@10	0.7318
cosine_mrr@5	0.6827
cosine_mrr@10	0.6894
cosine_map@5	0.6827
cosine_map@10	0.6894

Information Retrieval

• Dataset: dim_768
• Evaluated with InformationRetrievalEvaluator

Metric	Value
cosine_accuracy@5	0.9199
cosine_accuracy@10	0.9551
cosine_precision@5	0.184
cosine_precision@10	0.0955
cosine_recall@5	0.9199
cosine_recall@10	0.9551
cosine_ndcg@5	0.786
cosine_ndcg@10	0.7975
cosine_mrr@5	0.7408
cosine_mrr@10	0.7455
cosine_map@5	0.7408
cosine_map@10	0.7455

Information Retrieval

• Dataset: dim_512
• Evaluated with InformationRetrievalEvaluator

Metric	Value
cosine_accuracy@5	0.9071
cosine_accuracy@10	0.9519
cosine_precision@5	0.1814
cosine_precision@10	0.0952
cosine_recall@5	0.9071
cosine_recall@10	0.9519
cosine_ndcg@5	0.7794
cosine_ndcg@10	0.7943
cosine_mrr@5	0.7363
cosine_mrr@10	0.7427
cosine_map@5	0.7363
cosine_map@10	0.7427

Information Retrieval

• Dataset: dim_256
• Evaluated with InformationRetrievalEvaluator

Metric	Value
cosine_accuracy@5	0.8846
cosine_accuracy@10	0.9455
cosine_precision@5	0.1769
cosine_precision@10	0.0946
cosine_recall@5	0.8846
cosine_recall@10	0.9455
cosine_ndcg@5	0.7548
cosine_ndcg@10	0.7748
cosine_mrr@5	0.7108
cosine_mrr@10	0.7193
cosine_map@5	0.7108
cosine_map@10	0.7193

Training Details

Training Dataset

Unnamed Dataset

• Size: 7,232 training samples
• Columns: positive and anchor
• Approximate statistics based on the first 1000 samples:

  	positive	anchor
  type	string	string
  details	min: 5 tokens mean: 354.69 tokens max: 512 tokens	min: 9 tokens mean: 19.21 tokens max: 40 tokens

• Samples:

  positive	anchor
  , using diverse software or hardware designs may double design and verification costs due to having to build two different components for the same functionality. Hence, although DCLS execution also halves performance efficiency (the corresponding functionality is executed twice), it allows reusing the same design (e.g. the same core design) for the primary and the redundant paths (e.g. with staggered execution), thus containing design and verification costs. Redundancy can be applied at different granularities accord- ing to the sphere of replication (SoR). Choosing the right SoR depends on several tradeoffs like area overheads, re- design costs, fault detection time, and overall system costs. In the context of DCLS, the SoR is placed at the level of the CPU (core), as done for the AURIX processors. This requires including two replicas of the same core and compare their memory transactions, which requires roughly duplicating com- putational resources in the chip and being able to ensure that replicas can provide independent behavior. On the other hand, storage (memories, caches) and communication means (buses, crossbars) do not need to be fully replicated and can build upon Error Correction Codes (ECC) and Cyclic Redundancy Check (CRC) as a form of lightweight redundancy with diversity. HPC ASIL-D capable platforms typically combine a low- performance microcontroller amenable for the automotive do- main (i.e. ASIL-D capable) and an HPC accelerator deliv- ering high computation throughput, but whose adherence to ISO26262 requirements is unknown, so its appropriate use for ASIL-C/D systems needs to be investigated. Without loss of generality, we consider an NVIDIA GPU accelerator, thus analogous to those in NVIDIA Drive and Xavier families for the automotive domain. However, the findings in this paper can easily be extrapolated to other products. Software faults and some hardware faults are regarded as systematic, and it must be proven that their failure risk is residual. However, random hardware faults cannot be avoided, and means are required to prevent them from causing hazards. Those faults can be caused by, for example, voltage droops	What are the advantages of using the same design for the primary and redundant paths in DCLS execution?
  : First, the TT&C spectrum requirements of the new satellites shall be assessed. Second, the utilization of existing TT&C frequency allocations and their potential to incorporate the future number of satellites is studied. Only for the case that this study results in the need for new spectrum, the study groups were asked to investigate new potential TT&C frequency allocations in the frequency ranges 150.05-174 MHz and 400.15-420 MHz. The studies shall be completed for WRC-19. This paper presents the intermediate results of the study groups. A study of the spectrum requirements of small satellites has been completed. The required spectrum for TT&C is expected to be less than 2.5 MHz for downlink and less than 1 MHz for uplink. Consequently, the study groups conducted sharing studies in various bands which will be summarized and evaluated from a satellite developer’s perspective. After the Cubesat design standard was introduced in 1999 and first satellites of this new class have been launched in the subsequent years, small satellites have become increasingly popular in the past five years. Today not only universities use small satellite platforms for education and technology demonstration, but also commercial operators started to develop and deploy satellites with masses of typically less than 50 kg and reasonably short development times. Currently more than hundred new satellites are currently launched into space per year. The increase of launches was recognized by the International Telecommunication Union (ITU) which is responsible for the coordination of the shared use of frequencies. As the first Cubesats were mainly launched by new entrants into the space sector, mandatory regulatory procedures like frequency coordination were omitted or underestimated by the developers. Additionally, the new developers complaint that the existing regulatory procedures are too complicated and time-consuming for satellites with short development times. The ITU therefore decided at the WRC-12 to study the characteristics of picosatellites and nanosatellites and their current practice in filing satellites to the ITU. The studies were concluded in 2015 with two reports on the characteristics [1] and current filing practice [2]. In these reports it was identified that the characteristics that define small satellites (low mass, small dimensions, low power, …) are not relevant from a frequency coordination perspective and that the short development times are still long enough to properly file the systems to the ITU. As a result	What are the spectrum requirements for TT&C of small satellites?
  :287–299, Dec 2019. [20] Tam´as Vink´o and Dario Izzo. Global optimi- sation heuristics and test problems for prelimi- nary spacecraft trajectory design. Technical re- port, 2008. [21] Matej Petkovic, Luke Lucas, Dragi Kocev, Saˇso Dˇzeroski, Redouane Boumghar, and Nikola Simidjievski. Quantifying the effects of gyro- less flying of the mars express spacecraft with machine learning. In 2019 IEEE International [22] Janhavi H. Borse, Dipti D. Patil, Vinod Kumar, and Sudhir Kumar. Soft landing parameter measurements for candidate navigation trajec- tories using deep learning and ai-enabled plan- etary descent. Mathematical Problems in Engi- neering, 2022	What are some of the research topics and methods explored in the provided references?

• Loss: losses.WeightedMultipleNegativesRankingLoss with these parameters:

  {
      "scale": 20,
      "similarity_fct": "cos_sim"
  }
  

Evaluation Dataset

Unnamed Dataset

• Size: 804 evaluation samples
• Columns: positive and anchor
• Approximate statistics based on the first 1000 samples:

  	positive	anchor
  type	string	string
  details	min: 4 tokens mean: 351.15 tokens max: 512 tokens	min: 8 tokens mean: 19.36 tokens max: 45 tokens

• Samples:

  positive	anchor
  , the total number of test thermocouples has been rationalized taking into account redundancy needs, accommodation constraints and hardware passivation needs for flight. The test is subdivided into 19 phases (see Figure 12) with two phases before and after the test for the health check functional tests under room conditions. Functional tests demonstrate anomalies such as the PCDU Reset and operational malfunctions of the RAX instrument at its high temperatures. The PCDU Reset anomaly was solved during the test by a software patch and validated during the final hot and cold plateaus. To address the RAX anomaly at hot, various test configurations were simulated using the thermal numerical model during the test to actually perform RAX functional test at an intermediate plateau facilitating mission operational constraints for flight. Data collected from hot and cold thermal balance test phases, as well as the rover OFF transition from hot to cold, are the inputs for correlation activities conducted post-TV/TB test. The thermal numerical model updates mainly focus on conductive couplings	What was the solution to the PCDU Reset anomaly during the test?
  , where +Z axis orients to the earth, and sun pointing attitude mode during day time orienting -Z axis to the sun. Therefore, attitude control subsystem is required to maneuver the satellite attitude twice per revolution around its pitch axis. Figure 6 shows concept of the attitude maneuverer. Another attitude maneuverer is necessary to perform SAR observation and SAR data download to a to ground station, because X-band transmit antenna is oriented to +Z, so the satellite has to offset its attitude to orient the X-band transmit antenna toward the ground station. 3.4 High pointing accuracy Disturbance torque and system momentum profiles during few revolutions were estimated as shown in Figure 7 and 8. Four micro reaction wheels, which can respond to these profiles were selected which enable attitude maneuvers within a short period of time. In order to perform a pitch attitude maneuver quickly, two wheels are located on pitch axis while one wheel was located on each of the remaining roll and yaw axes. Figure 9 shows the satellite attitudes during SAR observation. There are three kinds of attitude, strip map mode, sliding spot light mode, and spotlight mode. Large change of momentum is required for pitch axis when the satellite is in spotlight mode. However, two pitch reaction wheels do not generate enough momentum to execute spotlight mode. So, sliding spotlight mode was selected for high resolution SAR observation mode instead of spotlight mode, in order to relax the torque and momentum requirements to the pitch wheels. In addition, two pitch Figure 7. Disturbance torque profile Figure 8. System momentum profile reaction wheels are accelerated to plus direction or minus direction by using magnet torque before observation. In order to obtain a high resolution SAR data, high attitude control accuracy is required for spotlight mode observation. To achieve high pointing accuracy against a defined ground target point, the attitude control loop applied feed forward compensation with estimated attitude angle and rate. Figure 10 shows an example of dynamic error during a spotlight mode observation maneuver.[4] Equipment for SAR mission consumes total large power more than 1300W, therefore PCDU has a risk of causing electrical and RF influence to the bus power and signal line. In order to research the system, electrical interface check was performed using bread board model of PCDU, battery	What is the reason for selecting sliding spotlight mode instead of spotlight mode for high resolution SAR observation?
  , body shape and motion assumptions. Then, ORSAT uses DCA to determine the reentry risk posed to the Earth’s population based on the year of reentry and orbit inclination. It also predicts impact kinetic energy (impact velocity and impact mass) of objects that survive reentry[18]. ORSAT has been in use for the last decade and currently in its 6.0 version. However, unlike DAS, OR- SAT is not readily available. Only personnel at the Johnson Space Center, Orbital Debris Program Office run ORSAT. ORSAT is limited to ballistic reentry, only tumbling motions or stable orientations of objects are allowed which produce no lift. Partial melting of objects is considered by a demise factor and almost all materials in the database are temperature de- pendent. Heating by oxidation is also considered [20]. Therefore, ORSAT determines when and if a reentry object demises by using integrated trajectory, atmospheric, aerodynamic, aero-thermodynamic, and thermal models as outlined in section 3.1 [17, 18, 20]. Reentry demisability analysis using DAS requires the spacecraft to be defined to the level of each individual hardware part constituting the spacecraft. This step facilitates population of the DAS Spacecraft Definition Module . Section 3.2.1 illustrates a generic spacecraft subdivision approach that can be followed to itemize the individual parts spacecraft parts. Subsequently, non-demisable parts are identified before or by the actual reentry analysis as explained in section 3.2.2. Itemization of the demisable spacecraft basic parts can be best approached by decompos- ing the spacecraft according to the Hierarchical System Terminology defined in the NASA Systems Engineering Handbook [14]. Tables 3.2, 3.3 and 3.4 illustrate a generic approach to decompose a spacecraft into basic parts [29, 30, 9] excluding the payload. Description of the specific product for the basic part identified completes the process. Though slight vari- ations are likely to occur in the decomposition of different missions, the Generic Spacecraft Subsystems Hierarchical Subdivision approach is robust, hence	What is the limitation of ORSAT in terms of object motion?

• Loss: losses.WeightedMultipleNegativesRankingLoss with these parameters:

  {
      "scale": 20,
      "similarity_fct": "cos_sim"
  }
  

Training Hyperparameters

Non-Default Hyperparameters

• eval_strategy: steps
• per_device_train_batch_size: 32
• per_device_eval_batch_size: 32
• learning_rate: 3e-06
• weight_decay: 0.001
• num_train_epochs: 20
• bf16: True
• tf32: False
• load_best_model_at_end: True
• batch_sampler: no_duplicates

All Hyperparameters

Click to expand

• overwrite_output_dir: False
• do_predict: False
• eval_strategy: steps
• prediction_loss_only: True
• per_device_train_batch_size: 32
• per_device_eval_batch_size: 32
• per_gpu_train_batch_size: None
• per_gpu_eval_batch_size: None
• gradient_accumulation_steps: 1
• eval_accumulation_steps: None
• learning_rate: 3e-06
• weight_decay: 0.001
• adam_beta1: 0.9
• adam_beta2: 0.999
• adam_epsilon: 1e-08
• max_grad_norm: 1.0
• num_train_epochs: 20
• max_steps: -1
• lr_scheduler_type: linear
• lr_scheduler_kwargs: {}
• warmup_ratio: 0.0
• warmup_steps: 0
• log_level: passive
• log_level_replica: warning
• log_on_each_node: True
• logging_nan_inf_filter: True
• save_safetensors: True
• save_on_each_node: False
• save_only_model: False
• restore_callback_states_from_checkpoint: False
• no_cuda: False
• use_cpu: False
• use_mps_device: False
• seed: 42
• data_seed: None
• jit_mode_eval: False
• use_ipex: False
• bf16: True
• fp16: False
• fp16_opt_level: O1
• half_precision_backend: auto
• bf16_full_eval: False
• fp16_full_eval: False
• tf32: False
• local_rank: 0
• ddp_backend: None
• tpu_num_cores: None
• tpu_metrics_debug: False
• debug: []
• dataloader_drop_last: False
• dataloader_num_workers: 0
• dataloader_prefetch_factor: None
• past_index: -1
• disable_tqdm: False
• remove_unused_columns: True
• label_names: None
• load_best_model_at_end: True
• ignore_data_skip: False
• fsdp: []
• fsdp_min_num_params: 0
• fsdp_config: {'min_num_params': 0, 'xla': False, 'xla_fsdp_v2': False, 'xla_fsdp_grad_ckpt': False}
• fsdp_transformer_layer_cls_to_wrap: None
• accelerator_config: {'split_batches': False, 'dispatch_batches': None, 'even_batches': True, 'use_seedable_sampler': True, 'non_blocking': False, 'gradient_accumulation_kwargs': None}
• deepspeed: None
• label_smoothing_factor: 0.0
• optim: adamw_torch
• optim_args: None
• adafactor: False
• group_by_length: False
• length_column_name: length
• ddp_find_unused_parameters: None
• ddp_bucket_cap_mb: None
• ddp_broadcast_buffers: False
• dataloader_pin_memory: True
• dataloader_persistent_workers: False
• skip_memory_metrics: True
• use_legacy_prediction_loop: False
• push_to_hub: False
• resume_from_checkpoint: None
• hub_model_id: None
• hub_strategy: every_save
• hub_private_repo: False
• hub_always_push: False
• gradient_checkpointing: False
• gradient_checkpointing_kwargs: None
• include_inputs_for_metrics: False
• eval_do_concat_batches: True
• fp16_backend: auto
• push_to_hub_model_id: None
• push_to_hub_organization: None
• mp_parameters:
• auto_find_batch_size: False
• full_determinism: False
• torchdynamo: None
• ray_scope: last
• ddp_timeout: 1800
• torch_compile: False
• torch_compile_backend: None
• torch_compile_mode: None
• dispatch_batches: None
• split_batches: None
• include_tokens_per_second: False
• include_num_input_tokens_seen: False
• neftune_noise_alpha: None
• optim_target_modules: None
• batch_eval_metrics: False
• batch_sampler: no_duplicates
• multi_dataset_batch_sampler: proportional

Training Logs

Epoch	Step	Training Loss	loss	dim_256_cosine_map@10	dim_512_cosine_map@10	dim_768_cosine_map@10
0.4425	100	0.5883	-	-	-	-
0.8850	200	0.2765	-	-	-	-
1.3274	300	0.2047	-	-	-	-
1.7699	400	0.1628	-	-	-	-
2.2124	500	0.1519	0.1204	0.7094	0.7271	0.7266
2.6549	600	0.1309	-	-	-	-
3.0973	700	0.1228	-	-	-	-
3.5398	800	0.1062	-	-	-	-
3.9823	900	0.097	-	-	-	-
4.4248	1000	0.0853	0.1026	0.7281	0.7409	0.7468
4.8673	1100	0.086	-	-	-	-
5.3097	1200	0.0723	-	-	-	-
5.7522	1300	0.0678	-	-	-	-
6.1947	1400	0.0655	-	-	-	-
6.6372	1500	0.0583	0.0970	0.7252	0.7479	0.7502
7.0796	1600	0.0586	-	-	-	-
7.5221	1700	0.0521	-	-	-	-
7.9646	1800	0.049	-	-	-	-
8.4071	1900	0.0437	-	-	-	-
8.8496	2000	0.0443	0.0974	0.7193	0.7427	0.7455

Framework Versions

• Python: 3.12.0
• Sentence Transformers: 3.0.1
• Transformers: 4.41.2
• PyTorch: 2.3.1+cu118
• Accelerate: 0.31.0
• Datasets: 2.20.0
• Tokenizers: 0.19.1

Citation

BibTeX

Sentence Transformers

@inproceedings{reimers-2019-sentence-bert,
    title = "Sentence-BERT: Sentence Embeddings using Siamese BERT-Networks",
    author = "Reimers, Nils and Gurevych, Iryna",
    booktitle = "Proceedings of the 2019 Conference on Empirical Methods in Natural Language Processing",
    month = "11",
    year = "2019",
    publisher = "Association for Computational Linguistics",
    url = "https://arxiv.org/abs/1908.10084",
}

WeightedMultipleNegativesRankingLoss

@misc{henderson2017efficient,
    title={Efficient Natural Language Response Suggestion for Smart Reply}, 
    author={Matthew Henderson and Rami Al-Rfou and Brian Strope and Yun-hsuan Sung and Laszlo Lukacs and Ruiqi Guo and Sanjiv Kumar and Balint Miklos and Ray Kurzweil},
    year={2017},
    eprint={1705.00652},
    archivePrefix={arXiv},
    primaryClass={cs.CL}
}