Datasets:

ramixpe

/

sp_dataset_llama

like 0

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: MKA-5-SESSION_SECURED_WITH_FALLBACK_PSK ### Response: (Severity: 5), (Category: L2), (Description: When MKA failed to secure the session with primary PSK, a new connectivty association(CA) created with fallback PSK termed as fallback CA, was able to secure the MKA Session, SESSION_SECURED happens successful only after MACsec Secure Channels and Secure Associations have been installed and enabled for both Rx and Tx.), (Recommended Action: Make sure not to have any config conflicts(key, key-string, lifetime) across the MACsec peers, configure valid primary PSK's in the keychain repository.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: VRRP-4-WARN_SHMEM_RESET ### Response: (Severity: 4), (Category: IP), (Description: There was a version mismatch in the VRRP shared memory and in handling this, the resetting of the shared memory failed. This may result in a memory leak.), (Recommended Action: No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ETH_SRVR-3-TX_STALLED ### Response: (Severity: 3), (Category: PLATFORM), (Description: Ethernet server is performing a periodic self test to ensure that transmit has not stalled for any reason. This error msg means that the test failed and transmit has stalled. Eth server will correct the condition by restarting itself and operator needs to do nothing.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers backplane ethernet trace location <node><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers backplane ethernet trace location <node><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.')

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IMA-3-MTU_IMPOSE_FAILED ### Response: (Severity: 3), (Category: L2), (Description: The specified MTU could not be applied on this interface.), (Recommended Action: No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLIM-2-ERR_HW_THRESHOLD_HARD_RESET ### Response: (Severity: 2), (Category: L2), (Description: A hardware error is detected on the PLIM, and the error threshold has been crossed. Software will take action as described in the error message to try to contain or recover from the error. The hardware error and the software recovery action will cause hard reset of a device in the data path and will impact traffic. Device: %s%s - indicates the device on which the error is detected. Error: %s - description of the hardware error. Threshold of %s - the defined threshold for this error. Software action: %s - the action that software will take to try to contain or recover from the error.), (Recommended Action: No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLAT_L2FIB_COMMON-7-TIMER_ERROR ### Response: (Severity: 7), (Category: PLATFORM), (Description: Failed to Attaching event timer to the L2FIB PD component.), (Recommended Action: None, platform software will correct itself if this happens.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SHELFMGRV2-3-NODE_IMDR_PROC_START_TIMEOUT_RESET ### Response: (Severity: 3), (Category: PLATFORM), (Description: This message indicates that the card is being reset because of timeout waiting for start of new version of MBI processes during IMDR from a specific node. This is an indication of IMDR operation failure during ISSU.), (Recommended Action: If the problem persist, collect the output of 'show tech-support install', 'show tech-support issu' and 'show tech-support shelfmgr' commands before contacting Cisco for technical support.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLAT_THOR_L2FIB_LTRACE-3-WARNING_INFO_VERBOSE ### Response: (Severity: 3), (Category: PLATFORM), (Description: PLATFORM THOR L2FIB, error information), (Recommended Action: Nothing. Platform will correct itself)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SHELFMGR-3-FAILED_LOAD ### Response: (Severity: 3), (Category: PLATFORM), (Description: This message indicates that the node failed to load the IOS XR image for maximum number of retries and will be reset.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: DOT1X-5-INFRA_START ### Response: (Severity: 5), (Category: L2), (Description: After all infra init dot1x process came up.), (Recommended Action: No action required (normal operation).)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BRIDGE-3-CRC_ERR_1_NPU_1 ### Response: (Severity: 3), (Category: PLATFORM), (Description: CRC error from NPU-1 on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: VCM-2-IM_PROC_DOWN ### Response: (Severity: 2), (Category: L2), (Description: IM(Interface Manager) did not come up before the timer expired), (Recommended Action: IM(Interface Manager) is down. Remove and reapply the config after the IM comes up.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: OPTICS-2-RX_POWER_THRESHOLD_ALERT ### Response: (Severity: 2), (Category: PLATFORM), (Description: Rx power threshold of higher than 30 should be set only for transceivers which are 3rd party optics. For cisco CFP2 transceivers it should be less than or equal to 30.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: EOBC-3-PKT_ERRORS_SFP0 ### Response: (Severity: 3), (Category: PLATFORM), (Description: Switch MAC detected excessive packet errors on link), (Recommended Action: Verify that the link errors are present and persistant. Get link counter: 'show controller backplane ethernet switch link <link node id> location <RSP node id>' Get link state: 'show controller backplane ethernet links location <RSP node id>' Get show tech: (admin)'show tech-support control-ethernet location <nodeId>')

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: LPTS_PIFIB-7-DEBUG_INIT_EVENT ### Response: (Severity: 7), (Category: OS), (Description: An error was returned when initializing debug.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: QFP_DRIVER-4-ADRSPC_LIMIT ### Response: (Severity: 4), (Category: L2), (Description: The process indicated tried to map more of the Forwarding Engine's address space than was allocated for it. A slower access method will be used instead. This will lower the performance of some operations which require accesses to the Forwarding Engine), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IPV6-3-SYSDB_BIND_FAILED ### Response: (Severity: 3), (Category: IP), (Description: Failed to connect to SysDB while starting the indicated subsystem. This usually happens when the process is starting up.), (Recommended Action: Wait for sometime till the process comes up and even after that if the error is seen restart ipv6_ea. This may fix the issue.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLATFORM_LPTS_PIFIB-3-CONFIG_POLICER_PARAMETER_MISSING ### Response: (Severity: 3), (Category: OS), (Description: There is a missing required parameter after a keyword in a policer definition. The policer may be assigned default characterstics.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: EVM-4-RMCONTEXT ### Response: (Severity: 4), (Category: OS), (Description: The Event Manager could not allocate memory to construct a Resource Manager context when delivering an RM message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Either some process is using too much memory or there is not enough physical memory available in the router. Determine if an application is misbehaving by checking the amount of memory allocated to each application and noting whether one is unusually large. If there are no misbehaving applications, memory should be added to the router.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: INGRESSQ-7-ERR_LWM_CREATE ### Response: (Severity: 7), (Category: FABRIC), (Description: Ingressq failed to create an Event Manager), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: INTERFACE-4-ERR_SYSDB_BAG_DECODE ### Response: (Severity: 4), (Category: MGBL), (Description: Failed to decode data retrieved from database), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: L2VPN-4-UNSOLVED_BRIDGE_TYPE_MISMATCH ### Response: (Severity: 4), (Category: L2), (Description: If the previous pseudowires have a pw-class with pseudowire type Ethernet VLAN, then these pseudowires will go down if new pseudowires are configured as pseudowire type Ethernet.), (Recommended Action: Check whether there is possible mis-configuration, for example in pw-class.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: COHERENT-3-DSP_LINE_RX_LOL ### Response: (Severity: 3), (Category: PLATFORM), (Description: No line lock between the NPU and DSP), (Recommended Action: Contact TAC)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: LIBSYSDB-7-LOCKING ### Response: (Severity: 7), (Category: SYSDB), (Description: The client library has either failed to aquire or release a lock.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PRM_SERVER-4-SPAN_SESSION_CREATE ### Response: (Severity: 4), (Category: PLATFORM), (Description: A failure has occurred while creating span session.), (Recommended Action: *SH_TECH*)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ELO-6-INTF_REMOTE_LOOPBACK ### Response: (Severity: 6), (Category: L2), (Description: The OAM session has either entered or exited local or remote loopback. If loopback has been entered then traffic flow will be disrupted until it is exited at which point normal functionality will resume.), (Recommended Action: None. This is an informational message.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CFP-3-LANE_1_LOW_TEMP_WARNING ### Response: (Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: DPA_QOSEA-3-VOQ_PROG_ERROR ### Response: (Severity: 3), (Category: QOS), (Description: Unable to program one ore more VoQs with the queueing parameters received for a remote interface. The message will provide further details on the error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SYSDB-4-SC_MISSTYPE ### Response: (Severity: 4), (Category: SYSDB), (Description: The command entered requires an item type and one was not supplied.), (Recommended Action: Use the help command to determine the correct usage for this command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: RS232-4-PDP_SET_ERROR ### Response: (Severity: 4), (Category: MGBL), (Description: The RS232 DLL has failed to enable the persistant data path for a TTY.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FABRIC_DRVR-3-ERR_ASIC_PON_RESET ### Response: (Severity: 3), (Category: FABRIC), (Description: Identified Fabric ASIC experienced a severe error and is halted. Power on reset & re-initialize the ASIC to recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: KIM-4-STATS_GATHER_PERIOD ### Response: (Severity: 4), (Category: INFRA), (Description: If there are a large number of interfaces, and the time between gathering all the packet stats is small, then there can be a performance impact accross the system for the statistics gathering.), (Recommended Action: Consider changing the update-frequency configuration to a longer period to minimize the performance penalty.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FABRIC_140G_POD-3-ERR_GASPP_INIT ### Response: (Severity: 3), (Category: FABRIC), (Description: The sfe-drvr process cannot initialize the infrastructure allow read/write access to the POD registers on the fabric card.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SHELFMGRV2-2-INSUFFICIENT_ZONE_POWER ### Response: (Severity: 2), (Category: PLATFORM), (Description: This message indicates that power allotted to the zone has exceeded the available zone power budget.), (Recommended Action: Please check the 'show power' command to resolve this situation.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: QFP_DRIVER-3-DESTROY_NOTIFY ### Response: (Severity: 3), (Category: L2), (Description: A CPP driver failed to destroy a connection.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PIM-5-INVALID_REGISTER ### Response: (Severity: 5), (Category: ROUTING), (Description: PIM invalid register message notification.), (Recommended Action: No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FSDB_SVR-3-FABRIC_UNSUPPORTED_CXP ### Response: (Severity: 3), (Category: FABRIC), (Description: Unsupported CXP connected to fabric card.), (Recommended Action: No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CFP-2-LANE_8_LOW_TX_POWER_ALARM ### Response: (Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power less than or equal to the low Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CFP-2-LANE_5_LOW_TEMP_ALARM ### Response: (Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: OSPF-6-MGDTIMER ### Response: (Severity: 6), (Category: ROUTING), (Description: An external managed timer support routine failed. The affect this error has on the proper operation of OSPF depends on where and when this error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CCC-4-PLX_ERRATA ### Response: (Severity: 4), (Category: DRIVER), (Description: Accessing PLX and related ports over PCI and I2C and check that PLX ERRATA execution completed successfully or failed.), (Recommended Action: For the RP/SC where SFE is active, wait for system recovery. If SFE is not active in the RP/SC, manual intervention might be needed for recovery. Collect 'show tech-support ctrace')

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FABMGR-0-INCONSISTENT_DB ### Response: (Severity: 0), (Category: PLATFORM), (Description: Fabricmgr encountered internal database consistency error. This usually occurs due to back-to-back faults. To recover, reloading impacted linecards.), (Recommended Action: Fabricmgr encountered internal database consistency error. This usually occurs due to back-to-back faults. To recover, reloading impacted linecards. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SAT_CHASSIS_INVMGR-6-OIRIN ### Response: (Severity: 6), (Category: PLATFORM), (Description: Fantray or Powertray entity is inserted in satellite.), (Recommended Action: Debug message only. No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: How can you define a BGP neighbor group in IOS XR? ### Response: A BGP neighbor group in IOS XR is defined to apply common configuration to multiple peers, reducing configuration redundancy. router bgp 65000 neighbor-group EDGE-PEERS remote-as 65001 update-source Loopback0 address-family ipv4 unicast commit

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: LIBMIRROR-3-ERR_GENERAL ### Response: (Severity: 3), (Category: MGBL), (Description: 'mirror encountered error, see message for more details'), (Recommended Action: *SH_TECH*)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: What is a thread in the context of the IOS XR microkernel? ### Response: A thread is a unit of execution within a process. The microkernel schedules threads, not processes. A process can have multiple threads. Threads time-share the CPU and can communicate using synchronous message passing IPC. Context switching between threads is very fast.

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SLICE_MGR_PROXY-6-SLICE_OPER_STATE ### Response: (Severity: 6), (Category: PLATFORM), (Description: Indicates that the change in oper state of slice.), (Recommended Action: None tac_details: None)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: DUMPER-7-DLL_INFO ### Response: (Severity: 7), (Category: OS), (Description: Dll information for the process being dumped), (Recommended Action: No action required. Ignore.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: LDA-4-WARNING ### Response: (Severity: 4), (Category: PLATFORM), (Description: A warning about a unexpected event that occurred. The warning message describes the event. The event does not impact any critical system functionality, but may affect some auxiliary function such as internal debugging or may activate some recovery path.), (Recommended Action: The warning is not critical, but should be documented and addressed at the normal service window for the system. Copy the error message exactly as it appears on the screen and gather the output of CLI 'show tech-support ethernet interfaces'. If the issue persists, please contact your technical support representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SHELFMGRV2-3-ENS_NOTIF_FAILURE ### Response: (Severity: 3), (Category: PLATFORM), (Description: This message indicates that Shelf Manager has failed to notify clients of state changes via ENS.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CLKCTRL_T-3-TX_ALARM_OC_SYNC_0 ### Response: (Severity: 3), (Category: PLATFORM), (Description: BITS transmitter has detected an open circuit condition.), (Recommended Action: Ensure cable connection between the configured interface port and external equipment.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: RT_CHECK-4-NODE_FAILED ### Response: (Severity: 4), (Category: OS), (Description: RCC or LCC detected a node that did not reply to statistics request during a background scan. It is possible that the node is just busy with processing updates and could not reply to the statistics. It is also quite probable that the node in question is blocked and is not no longer working properly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SKYWARP_INTF_INJ_CAP_DLL-3-LTRACE_INIT ### Response: (Severity: 3), (Category: PLATFORM), (Description: The ltrace file could not be created.), (Recommended Action: Please contact TAC Support Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: c2c_iif-3-ERR_SW ### Response: (Severity: 3), (Category: PLATFORM), (Description: The C2C IIF library encountered an error which it cannot resolve.), (Recommended Action: An error would be reported to the client application which should handle this condition appropriately. *None*)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: HA_WD-7-RVM_ERROR_CALL_BACK ### Response: (Severity: 7), (Category: HA), (Description: An error occured in CAPI with RVM-Manager.), (Recommended Action: This indicates an issue on CAPI with RVM-Manger, Collect show tech HBloss, show tech ctrace, vm-monitor process core.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: What is the purpose of the MPLS TE path-option explicit feature? ### Response: The MPLS TE path-option explicit feature allows the path for an MPLS TE tunnel to be explicitly specified using a configured path. An explicit path is a list of IP addresses or interface names that define the tunnel's route. Explicit path-options override dynamic path calculation and provide exact control over the tunnel's path.

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SRP-3-ERR_DUP_MAC_ADDR ### Response: (Severity: 3), (Category: L2), (Description: Another node on the ring is using the same MAC address as this node. This can effect traffic forwarding.), (Recommended Action: Correct the configuration of each node, where necessary, to ensure that each node uses a unique MAC address. Use the 'show srp topology' CLI to identify any nodes using the same MAC address.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FWDLIB-7-ERR_INIT ### Response: (Severity: 7), (Category: PLATFORM), (Description: Initialization of fwdlib has failed.), (Recommended Action: No action is required. Process will be restarted. If not recovered, it's a fatal condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: TELNETD-3-SYSTEM_ERROR ### Response: (Severity: 3), (Category: IP), (Description: The invocation of a system call returned error condition.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CONTROL_DRIVER-3-I2C_ERR ### Response: (Severity: 3), (Category: DRIVER), (Description: This indicates that there is a HW failure on i2c bus), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BGP-4-BPM_NEG_NBR ### Response: (Severity: 4), (Category: ROUTING), (Description: BGP and sysdb are out of sync (neighbor config present but no neighbor in bgp) and as a result, unconfiguring neighbor results in negative neighbor count in BGP), (Recommended Action: This message is info only.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: INBAR_HB-7-INFO_SHM ### Response: (Severity: 7), (Category: FABRIC), (Description: Fabric server encountered a change in the shared memory region parameter.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ICPE_GCO-5-TRANSFER_INTERRUPT ### Response: (Severity: 5), (Category: PKT_INFRA), (Description: Control session to satellite disconnected while image transfer was in progress. Run 'show nv satellite protocol control' for more information.), (Recommended Action: Re-try the transfer once the session has reconnected.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: QSFP_PLUS-3-LANE_2_HIGH_TEMP_WARNING ### Response: (Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser temperature greater than or equal to the high temperature warning threshold. The QSFP+ is the pluggable optics on the line cards. The temperature threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FSDB_FADB-3-SHM_CREATE_FAIL ### Response: (Severity: 3), (Category: FABRIC), (Description: FSDB FADB encountered an error while attempting to create the FADB shared memory.), (Recommended Action: Search the event logs for events/errors related to the failure reason. Shared Memory Management is part of overall system. If there are failures here then other processes may also exhibit similar problems. Collect all the event logs (show logging) and the output of the following command. 'admin show process fsdb_fadb location <loc>' Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PFDIAGBASE-3-STATE_ERROR ### Response: (Severity: 3), (Category: DIAG), (Description: An internal state of the diagnostics process was set to an invalid state or value. The process did not know how to handle this state. This is a serious error and may indicate a bug in the software. This is not a service impacting error.), (Recommended Action: Check the log ('show logging') to determine if there are any other related error messages. Also, please check Bug Navigator ( https://tools.cisco.com/bugsearch?referring_site=btk ) to search for any bugs in this area. If the error continues, copy the error message exactly as it appears on the screen and gather any relevant information about the circumstances. Also collect the information from 'show logging' and 'show tech diagnostics' commands. Contact your technical support representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: MBIMGR-3-NODEID_FAIL ### Response: (Severity: 3), (Category: PLATFORM), (Description: Getting a node id to find out the mbimgr is running on that node or not got failed. Either an invalid location is being queried, or the infrastructure is behaving incorrectly. The MBI operation in progress may not be carried out. %s - indicates the location of the error. %s - indicates the error message.), (Recommended Action: If the MBI operation does not complete successfully, then further manual action will be required. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SHMWIN-2-SHARED_PAGE_ERROR ### Response: (Severity: 2), (Category: OS), (Description: SHMWIN hit an error related to the shared page. This error indicates that the shared memory window library detected a service internal error condition. This does not mean a service impacting condition.), (Recommended Action: If this message recurs, copy the system message exactly as it appears on the console or in the system log. Collect the following information and contact your Cisco technical support representative. Provide the representative with the gathered information. - show logging - show memory location 0/x/CPUx)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: DUMPER-4-SYSDB_UNBIND_FAIL ### Response: (Severity: 4), (Category: OS), (Description: Dumper keeps various config related data in sysdb. Here dumper could not connect to sysdb), (Recommended Action: Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SPA_OC48-3-ERR_SFP_OIR ### Response: (Severity: 3), (Category: L2), (Description: There is an error detected during SFP OIR. SFP is the pluggable optics on the SPA, SFP OIR can cause some operation in sw, e.g. create/delete optics object, SFP authentication. 'SFP OIR error' is for any possible error during the operation. The optics will not work if SFP OIR operation failed, therefore no traffic can pass. %d - SPA bay number %s - indicates the reason for the failure %s - is the decoded error reason), (Recommended Action: - Check the SFP, make sure it is CISCO certified; - Try to do the SFP OIR for a few more times; - If the issue persists, reload the SPA with the command: hw-module subslot 0/x/x reload then test SFP OIR after SPA comes up. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CFP-3-LANE_14_LOW_RX_POWER_WARNING ### Response: (Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power less than or equal to the low Rx power warning threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that device and RX fiber is properly inserted. Verify that the far end is enabled and transmitting and the input attenuation is not too high. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ENVMON-6-OPERATION_OVERRIDE ### Response: (Severity: 6), (Category: PLATFORM), (Description: Override condition has been triggered.), (Recommended Action: No action required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: MPLS_TE-3-ERR_AUTO_TUN_BKP_TUN_DEST_LIMIT_EXCEEDED ### Response: (Severity: 3), (Category: ROUTING), (Description: The creation of the auto-tunnel backup aborted since it would have exhausted the tunnel destination scale limit), (Recommended Action: Reduce configured/auto tunnels to below the system destination limit)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IOFPGA-4-MTP_MODE_DETECTED ### Response: None

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: C_SHIM_PARTNER-3-SVR_UBIND_ERR ### Response: (Severity: 3), (Category: L2), (Description: 'There is a software error when trying to unbind to IM.'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FIA-1-SKT_AB_INTR_IFIFO_ORUN0_0 ### Response: (Severity: 1), (Category: FABRIC), (Description: SKT_AB_INTR_IFIFO_ORUN0 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: RADIUSD-3-SETPRIO_FAILED ### Response: (Severity: 3), (Category: SECURITY), (Description: Attempt to change priority failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: DAD-3-SYSMGR_PROC_READY_FAIL ### Response: (Severity: 3), (Category: ROUTING), (Description: A failure occured while trying to tell sysmgr that we are ready for processing.), (Recommended Action: Check whether policy_repository process is running properly by command 'show process policy_repository' Check the install logs if all the packages are downloaded and install operations completed properly)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ACCTD-3-MEMORY ### Response: (Severity: 3), (Category: SECURITY), (Description: acctd failed to allocate the required amount of memory.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IGPTE_LIB-3-ERR_DBG_REGISTER ### Response: (Severity: 3), (Category: ROUTING), (Description: IGP failed to register with the debug module for printing messages.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: DUMPER-6-COREDUMP_TIMEOUT_CANCEL ### Response: (Severity: 6), (Category: OS), (Description: A process core dump has been cancelled as it is not likely to finish within the indicated max core dump time. Reasons could be it has been pending in the process dumper waiting queue too long, or that the core dump itself took too much time.), (Recommended Action: No action required. Ignore.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PFILTER_EA-7-EVENT_ERROR ### Response: (Severity: 7), (Category: L2), (Description: The pfilter_ea process received a bad event. This pfilter_ea process programs the 'packet filter' security access control list in the hardware. %s - is the decoded error reason.), (Recommended Action: Monitor the event messages. The pfilter_ea process will handle the failure gracefully but if they continually appear on the console, try doing 'process restart pfilter_ea location 0/x/cpu0'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: OSPFv3-3-FRIS_INSERT ### Response: (Severity: 3), (Category: ROUTING), (Description: An error occurred when adding the interface to the forward-reference list.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CT_DSP-1-ALARM_BDI_DEMB ### Response: (Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: OSPF-4-MAX_INTF_APPLY ### Response: (Severity: 4), (Category: ROUTING), (Description: The number of interfaces configured exceeds the interface limit.), (Recommended Action: Either raise the maximum interface limit or unconfigure interfaces until the number is below the limit.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BGP-3-UNKNOWN_MEMSTATE ### Response: (Severity: 3), (Category: ROUTING), (Description: BGP received a low memory notification from wdsysmon for an unknown memory state, ie not NORMAL, MINOR, SEVERE or CRITICAL. As a result, no action was taken.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ETNA-1-ALARM_LOS_PORTP1 ### Response: (Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SYNCFS2-7-LRD_PARTNER_AVAILABLE ### Response: (Severity: 7), (Category: MEDIA), (Description: The Standby card has been inserted and sync will be started), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PWHE_EA_PD-7-ERR_NOTSUP ### Response: None

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: OBFLINFRA_INT-3-TIMER_ERROR ### Response: (Severity: 3), (Category: OS), (Description: Something went wrong with the timer), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SIM_SE-3-LATEST_BIOS_BOOT_TIMEOUT ### Response: (Severity: 3), (Category: PLATFORM), (Description: TBD.), (Recommended Action: Please collect the output of 'show logging' and contact TAC.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: UDLD-5-TX_RX_LOOPBACK ### Response: (Severity: 5), (Category: L2), (Description: The UDLD protocol has detected that packets transmitted from this port are being received on the same port. The link will be disabled. This could be caused by one of the following: - There is a connection between the Tx and Rx of this port (directly or via intermediate non-UDLD-aware connections) causing transmitted packets to be received on the same port. - This port has a peer which is using the same device ID and port ID.), (Recommended Action: Correct the miswiring or misconfiguration, then re-enable UDLD using the following command: - ethernet udld reset interface <port name>)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PFILTER_NETIO_LTRACE-7-INIT ### Response: None

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ILITE-3-GET_PLIM_TYPE_ERROR ### Response: (Severity: 3), (Category: PLATFORM), (Description: Unable to get the plim type.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: INBAR_HB_TOPAZ-7-ERR_HEARTBEAT_FSM_STATE ### Response: (Severity: 7), (Category: FABRIC), (Description: Fabric server heartbeat monitoring mechanism detected a problem in the internal state machine.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: DUMPER-3-DLOPEN_FAILED ### Response: (Severity: 3), (Category: OS), (Description: Dumper startup failed because loading of some dlls failed. Most likely cause is memory running low.), (Recommended Action: Please free some space or restart the process dumper. If the issue is seen even after restart then, Please contact support with the following data. 1. show exception 2. admin show exception trace dumper severity info 3. admin show exception trace dumper-config severity info 4. show logging 5. show memory)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SSM-3-MSG_SEND_PULSE ### Response: (Severity: 3), (Category: OS), (Description: SSM process tried to send a pulse to the clients channel using MsgSendPulse api and encountered a failure.), (Recommended Action: Collect system log information for the reported service and pid. For mentioned pid collect show process <pid> and follow process <pid> Also collect show process blocked , show tech ssm. If this message is seen repeatedly, capture the output of debug event-manager all job <ssm jid>. 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IPV4_MFWD-3-ERR_AIB_MAP ### Response: (Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IPV4_ACL-6-IPACCESSLOGDP ### Response: (Severity: 6), (Category: ACL), (Description: A packet matching the log criteria for the given access list was detected. These messages are issued whenever access lists are configured with the 'log' option and matches with the IP protocol type ICMP. This message is seen for the first match and for each match after the hit count is greater than 0x7FFFFFFF(2147483647).), (Recommended Action: This is information only message, no action required No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BRIDGE-1-SOFT_ERROR_ALERT_3 ### Response: (Severity: 1), (Category: PLATFORM), (Description: Soft error detected on Bridge FGPA instance 3.), (Recommended Action: Please reload the board in the next maintenance window. Until then affected ports will be down. 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)