Datasets:

ramixpe

/

sp_dataset_llama

like 0

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IKE-4-UNKNOWN_EXCHANGE_TYPE ### Response: (Severity: 4), (Category: SECURITY), (Description: IKE performs actions on messages based on defined exchanges. A message received with an unknown exchange.), (Recommended Action: 'If the problem appears to be more than a transient one, contact the peer's administrator.')

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: COREHELPER-3-CORE_COPY_ERROR ### Response: (Severity: 3), (Category: OS), (Description: Failed to copy core file to specified path.), (Recommended Action: Check connectivity, storage and dumper process; collect show context and console message. Report this message to TAC.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IPV6_EA-3-INIT_FAILED ### Response: (Severity: 3), (Category: L2), (Description: Initialization process such as getting an evm failed.), (Recommended Action: sysmgr will retry to start the ipv6_ea. If not recovered, it's a fatal condition. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: AUTH_SRV-3-ERR_2SD_PARAM ### Response: (Severity: 3), (Category: SECURITY), (Description: auth srv exp error message.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: INSTALL-3-OP_HISTORY_NOT_FOUND ### Response: (Severity: 3), (Category: INFRA), (Description: The file containing operation history data for this operation could not be found. Operational data requests will not return the full set of information. This does not indicate any issue with the install operation itself.), (Recommended Action: None.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FIA-1-SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_0_0 ### Response: (Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_0 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: WDMON_LIB-3-CCC_WATCHDOG_PUNCH_ERROR ### Response: (Severity: 3), (Category: INFRA), (Description: Error occurred in HW watchdog punching logic due to which watchdog punching has stalled. Card will reload if the system is unable to correct this condition on its own.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FPD_UPD-3-BAD_FPGA_IMAGE ### Response: (Severity: 3), (Category: INFRA), (Description: The indicated image in SPI flash does not appear to have a valid meta-data. This means that a previous FPD upgrade operation did not finish the programming operation of the image.), (Recommended Action: Run again the 'upgrade hw-module location <loc> fpd <fpd_name>' command to re-program the image.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: umass_enum-5-UNABLE_TO_FIND_EUSB_PARTITION ### Response: (Severity: 5), (Category: PLATFORM), (Description: Check for partitions and mount Satori internal eUSB. Check if eUSB device is there with partitions. If it unable to find EUSB partitions then this message will get printed.), (Recommended Action: No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PFM-3-INV_FAULT_SEVERITY ### Response: (Severity: 3), (Category: PLATFORM), (Description: Platform Fault Manager Node detects an invalid fault severity defined in the Application Fault Condition Database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PMIPV6-3-NOT_LMA_FOR_THIS_MOBILE_NODE_2 ### Response: (Severity: 3), (Category: IP), (Description: Network is not configure in the profile of the MN whose NAI is printed in the error message.), (Recommended Action: Configure network in the MN profile. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: DUMPER-5-LTRACE_INIT ### Response: (Severity: 5), (Category: OS), (Description: Failed to initialize dumper ltrace buffer), (Recommended Action: No action required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CMPP-4-INIT_FAILED ### Response: (Severity: 4), (Category: INFRA), (Description: An error was encountered while the specified process was initializing. The error message contains details about the source of the error.), (Recommended Action: The process will exit and will be restarted. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: VKG_PM-6-INTERFACE_EA_INFO ### Response: (Severity: 6), (Category: PLATFORM), (Description: Generic info messages pertaining to service PM.), (Recommended Action: No action is required for this message.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SHELFMGRV2-3-CHKPT_RECORD_BAD_LENGTH ### Response: (Severity: 3), (Category: PLATFORM), (Description: The reason should be supplied in the IOS msg itself, but basically this messge means that shelfmgr received bad length during standby HA check Point update.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: EGRESSQ-3-INTERFACE_FAIL ### Response: (Severity: 3), (Category: L2), (Description: Interface creation failed due to egressq port creation failure. Can't map Interface handle to egressq port, it could be because of: Invalid interface handle passed.), (Recommended Action: No action is required. The process will automatically retry. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PCIE-2-ROOT_DEVICE_BUS_CRITICAL ### Response: (Severity: 2), (Category: PLATFORM), (Description: A PCIe bus error has occurred. The message has the root device identification, error severity, and error type.), (Recommended Action: *RECUR*)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: EMUX-3-RX_MIN_LEN_ERR_FIA00 ### Response: (Severity: 3), (Category: PLATFORM), (Description: Packet minimum length error FIA 00 interface.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: VPDN-3-MGR_EVM ### Response: (Severity: 3), (Category: SUBSCRIBER), (Description: The event processing infra has returned a fatal error.), (Recommended Action: Allow VPDN Manager to restart. If the problem persists, contact Cisco support.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: RSP_CPUCTRL-3-SCI_CRAM_SBE_ERR ### Response: (Severity: 3), (Category: PLATFORM), (Description: Error reported by the cpu control fpga), (Recommended Action: Check and upgrade FPGAs on the board.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IPV6_ND_LITE-3-SHMEM_MMAP_FAIL ### Response: (Severity: 3), (Category: L3), (Description: A failure has occured in mapping a shared memory region required for communication between the IPv6 Neighbor Discovery (ND) process (ipv6_nd) and the ND spoofing process (ipv6nd_lite). This error alone will not prevent the router from working, but since ipv6nd_lite is used to maintain service during restarts of ipv6_nd, it may cause the router to become momentarily unreachable by other routers during restart.), (Recommended Action: Check that the ipv6nd_lite process is running and restart it if necessary. Look for other error messages that may help explain the problem.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: DIAG-4-TEST_NOT_SUPPORT ### Response: (Severity: 4), (Category: DIAG), (Description: The diagnostic test is not supported on current chassis configuration.), (Recommended Action: This message does not indicate any problem with the system. The test cannot be run because it is not supported on this chassis configuration. No further action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: HOSTNAME_SYNC-3-INIT_FAILURE ### Response: (Severity: 3), (Category: OS), (Description: Error during initialization of hostname_sync daemon.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FSDB-1-FABRIC_UPDOWN ### Response: (Severity: 1), (Category: FABRIC), (Description: If the fabric is reported down, it means that none of the fabric planes are UP. If the fabric is not UP, system cannot be used for any data traffic.), (Recommended Action: Ensure that fabric cards are installed in the system. For multichassis systems ensure that the fabric racks have booted and the fabric cables are installed. Fabric can come up late if the fabric rack or fabric cards are booted up late. Wait for more time to see if the fabric comes UP. For MC systems, check if plane admin config exists on the router. If not, configure the plane admin config. If condition persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CCC-4-ISO_INSTALL_EXIT ### Response: None

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: RDS-7-GET_DH_ENTRY ### Response: (Severity: 7), (Category: OS), (Description: Could find datahandle entry in the vector for replica The datahandle might have not been added or may have been deleted.), (Recommended Action: This is a Debug message.No action required. If the problem persists,Contact Support.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: LIBINST_DEBUG-4-MUTEX ### Response: (Severity: 4), (Category: INSTALL), (Description: The process failed to obtain a mutex lock/unlock.), (Recommended Action: The debug infrastructure was unable to acquire/release the lock. This only impacts debugging commands and has no impact on the functionality of the system.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: UTIL-3-NOINIT ### Response: (Severity: 3), (Category: SNMP), (Description: The SNMP Utilities library was not properly initialized by the SNMP agent. This is an internal software error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FHRP_OUTPUT-3-ERR_EVM_CREATE ### Response: (Severity: 3), (Category: IP), (Description: The FHRP output process was unable to obtain an event connection manager. FHRP Output process client functionality on the affected node may be reduced until the problem is resolved.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: LC_CPUCTRL-2-NO_FAB_ACT_ERROR ### Response: (Severity: 2), (Category: PLATFORM), (Description: LC CPU controller driver detected no active fabric in the system.), (Recommended Action: If there are no RSPs present or if both RSPs are undergoing a reload, then this is an expected message. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CFM-3-PAK_ERROR ### Response: (Severity: 3), (Category: L2), (Description: An error occurred unexpectedly while calling the packet management infrastructure to handle a CFM packet during packet send.), (Recommended Action: The 'cfmd' process will restart after this error is seen. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: NRSUTILS-3-INTERNAL ### Response: (Severity: 3), (Category: OS), (Description: The client library has either failed a function that expected to succeed, or has got into an inconsistent state.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ENVMON-2-PORT_OVERTEMP_DISABLE ### Response: (Severity: 2), (Category: PLATFORM), (Description: Port is disabled if the port temparture is over the critical threshold for more than 24hrs. And re-enabled if, the temperature drops.), (Recommended Action: Verify the failure, use show env to help. If the failure does not alleviate, call your technical support representative for repair or replacement.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SCHBRO-7-UNKCMD ### Response: (Severity: 7), (Category: MGBL), (Description: The first token in a command string was not a recognised XML schema browser command.), (Recommended Action: Check the list of available commands and retry. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FABARBITER-2-TEMP_FAULT ### Response: (Severity: 2), (Category: PLATFORM), (Description: Fabric arbiter detected temperature fault), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: HA_WD-3-API_ERROR ### Response: (Severity: 3), (Category: HA), (Description: API returned error .), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IPHC_MA-4-EVC_INIT ### Response: (Severity: 4), (Category: L3), (Description: After detecting an error with the connection to the specified service, IPHC PROFILE MGR failed to reset that connection. This is an internal error. It requires a restart of the process for recovery.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: TTY-0-ISSU_STDBY_CON_AVAILABLE ### Response: (Severity: 0), (Category: MGBL), (Description: 'Standby Console available during ISSU Load Exec and Load Done Phase'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IMAEDM-3-TIMER_CREATE_FAILED ### Response: (Severity: 3), (Category: PKT_INFRA), (Description: Internal error), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ALARMS-6-CLEAR ### Response: (Severity: 6), (Category: MGBL), (Description: Some (or all) of the alarms in the alarm buffer have been deleted as a consequence of an action initiated by the user. This message does not require any action. It informs that a clear logging event delete command or an alarm buffer resize operation (or equivalent operation through another management interface) was executed.), (Recommended Action: No action is required to be taken by the user as this is just an informational message envoked clear logging event <> command by the user only)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: MRIB_API-3-RPC_FAIL ### Response: (Severity: 3), (Category: ROUTING), (Description: 'An RPC-related error occurred in an RPC call from the MRIB API'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: How is BGP Graceful Restart configured in IOS XR? ### Response: BGP Graceful Restart is configured using the 'bgp graceful-restart' command in router BGP configuration mode. Additional options can be configured such as the restart time, stalepath time, and so on. Graceful Restart must be configured on all participating BGP speakers.

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: HPISSE-7-DEBUG_STATUS ### Response: None

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: JACKET-3-API_FAILURE ### Response: (Severity: 3), (Category: L2), (Description: Client to the SPA THOR jacket process had a communications failure), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: AN-3-ACP_VRF_GLOBAL_CREATE_FAIL ### Response: (Severity: 3), (Category: SERVICES), (Description: 'Autonomic network VRF has not been created globally'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SRP-3-ERR_LTRACE_INIT ### Response: (Severity: 3), (Category: L2), (Description: Process encountered an error during software initialization. ltrace initialization is failed. So we will not get any traces using ltrace cli. It may fail very rarely. It will work most of the time. we added this message only for debugging purpose.), (Recommended Action: Check if the linecard reported any other errors during the boot process as this error is normally associated with larger system issues. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: LRD-4-CANT_FIND_DSC ### Response: (Severity: 4), (Category: HA), (Description: LRdlib could not find the dSC.), (Recommended Action: Collect system log information. No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: RCMD_LIB-3-INIT_FAIL ### Response: (Severity: 3), (Category: ROUTING), (Description: An error occurred during RCMD library intialization, causing the process to restart.), (Recommended Action: Report to Technical Support. Not a fatal error if seen one time, but frequent occurrences can impact routing features.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CETHHA-4-NOGE ### Response: (Severity: 4), (Category: PLATFORM), (Description: RP does not have GE connectivity. Reload/failovers may cause problems.), (Recommended Action: Check the GE connections on the front panel of the RP/SC and re-connect/replace to make sure atleast one GE connection is there.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLATFORM_LPTS_PIFIB-3-ERR_TCAM_ODS_WRITE ### Response: (Severity: 3), (Category: OS), (Description: TCAM ods write error.), (Recommended Action: When this issue happens, restart the pifibm_server_lc process on that linecard. If the issue persist, you will need to reload the linecard.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FSYNC-6-SSM_PRS ### Response: (Severity: 6), (Category: L2), (Description: The quality level of the source has been changed to or from PRS. Traceable condition occurs when the SSM transmission level is changed to Stratum 1 Traceable.), (Recommended Action: None, this is an informational condition that does not require troubleshooting.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: QSM-7-LOCK_NOTFOUND ### Response: (Severity: 7), (Category: OS), (Description: This is a debug message that is not compiled into a customer version of the code. The lock list was corrupted.), (Recommended Action: Debug message only. No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CROSSBAR-1-HI_FPOE_DB_UCORR_ECC_ERROR_LNK1 ### Response: (Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected unicast FPOE uncorrectable ECC error on link 1), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SAT_CHASSIS_ENVMON-2-SAT_TEMPERATURE_ALM ### Response: (Severity: 2), (Category: PLATFORM), (Description: This alarm is generated when a high temperature alarm occurs on satellite.), (Recommended Action: Contact engineering with output of cli: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>(RP)# admin show temperature | b SAT<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>(RP)# admin show temperature | b SAT<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FM-2-INFRA_FAIL ### Response: (Severity: 2), (Category: PKT_INFRA), (Description: There was a IOS-XR infra call failure while attempting to provide some infrastructure service. These typically could be some IPC services or debug infrastructure, etc.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: XTC-3-CALLBACK_WRONG_THREAD ### Response: (Severity: 3), (Category: OS), (Description: A callback from the IOX-XR infrastructure was not handled by the XTC process because it was received in the wrong thread. The XTC process may now be in an inconsistent state with the rest of the system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The xtc_agent process may be restarted in order to recover from this situation.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PMIPV6-3-BA_UNSPEC_FAIL_7 ### Response: (Severity: 3), (Category: IP), (Description: The Re-registration PBU should not contain All-Zero HoA option.), (Recommended Action: If the issue is seen repeatedly, do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: REDCON-4-STBY_CONN_RETRY ### Response: (Severity: 4), (Category: HA), (Description: Redcon failed to establish a connection to redcon on the standby card.), (Recommended Action: Collect system log information. No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ASR9K_LICENSE-2-OPTICS_NEEDED ### Response: (Severity: 2), (Category: LICENSE), (Description: The G.709 feature is configured without the necessary license.), (Recommended Action: The customer should either purchase the license or disable the feature.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLIM_ETHER-3-SW_ERR ### Response: (Severity: 3), (Category: L2), (Description: A software error is detected on PLIM.), (Recommended Action: Check if the linecard reported any other errors and/or traffic loss was observed.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ISIS-6-ERR_RCV_PAKTYPE_NOT_LAN ### Response: (Severity: 6), (Category: ROUTING), (Description: The packet is invalid because it is a P2P packet received on a LAN interface. The packet has been ignored.), (Recommended Action: No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: RPL_COORD-7-GROUP_RESPONSE_UNEXPECTED ### Response: (Severity: 7), (Category: ROUTING), (Description: The rpl multi-version coordinator received a message response instead of a request. This has been ignored and it is likely no other problems will result from this.), (Recommended Action: Observe system for other failures contact support team.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CFP-3-LANE_6_HIGH_BIAS_WARNING ### Response: (Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: What is the purpose of the MPLS TE auto-tunnel primary affinity feature? ### Response: The MPLS TE auto-tunnel primary affinity feature allows auto-tunnel primary tunnels to select or avoid links for the primary path based on configured affinity attributes. This provides more control over the primary path selection compared to the default behavior of using the TE metric. Affinities allow primary paths to be optimized for specific requirements.

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CGN-4-SEQUENTIAL_POOL_DELETE ### Response: (Severity: 4), (Category: SERVICES), (Description: SEQUENTIAL PRIVATE POOL IS NEEDED FOR SEQ NAT WORKING.), (Recommended Action: None.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ENVMON-6-PS_SHUTDOWN_ERROR ### Response: (Severity: 6), (Category: PLATFORM), (Description: Indicates that a non Cisco compliant power supply was detected. The attemp to shutdown this power supply has failed for number of tries.), (Recommended Action: Insert Cisco power supply)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLAT_FIB_HAL-3-INVALID_SUBSCRIBER_NEXTHOP ### Response: (Severity: 3), (Category: PLATFORM), (Description: The platform dependent, PD, FIB software received an invalid subscriber route whose nextHop indicates a TE tunnel or an IP tunnel. This is invalid network topology for subscriber deployment. Please check the router configuration and network topology for subscriber routes, like default route configuration and subscriber routes re-distribution.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: MCASTSN_POLICY-3-ORA_ORABUILD ### Response: (Severity: 3), (Category: L2), (Description: There was an internal error in the routing policy library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp snooping trace error verbose<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp snooping trace error verbose<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: INSTMGR-3-XR_ACTIVE_PKGS_MISSING_IN_REPO ### Response: (Severity: 3), (Category: INFRA), (Description: One or more active XR packages are not found in repository. When a node goes through internal pxe or a new card is inserted, XR will fail to come up on that node as packages in active software profile is missing and XR prepare will fail.), (Recommended Action: Install add the packages that are mentioned to be not found in the XR repository and please reload all the node(s) on which XR failed to come up, reload the node after install add is successful.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IPV6-4-PA_BIND_RETVAL ### Response: (Severity: 4), (Category: IP), (Description: A certain ICMP6 type couldn't be registered with PA.), (Recommended Action: Restarting lpts_pa and then ipv6_io may fix this issue.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CONFIG-6-COMMITDB_SANITY ### Response: (Severity: 6), (Category: MGBL), (Description: An error was encountered while stating a file in commitdb sanity module. This could be an intermittent software failure and this will get resolved automatically.), (Recommended Action: The error message is simply an informational message as the problem will get resolved automatically and no action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BGP-4-LOCK_ORDER ### Response: (Severity: 4), (Category: ROUTING), (Description: BGP detected a violation of lock ordering requirements), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ETH_SRVR_API-3-ERR_INVALID_PKT_PTR ### Response: (Severity: 3), (Category: PLATFORM), (Description: Invalid Packet pointer received while trying to return a group of buffman buffers to ES rx/tx mem pool This message indicates error condition where invalid packet pointer was received while freeing buffers.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: QOS-3-EA_ROLLBACK_FAILURE_DURING_MODIFY ### Response: (Severity: 3), (Category: QOS), (Description: QoS EA encountered an error when modifying the policy on an interface, upon which a rollback was attempted on this interface to restore the old policy. There was an error encountered during this rollback too, due to which neither the old policy nor the new policy is applied in hardware for this interface.), (Recommended Action: Try removing the QoS policy on the interface for which this error message is printed from configuration, and then reattach the policy to the interface. 'interface <interface name>' 'no service-policy input | output <policy-name>' 'commit' 'serveice-policy input | output <new-policy name>')

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: MPLS_TE-3-CALLBACK_WRONG_THREAD ### Response: (Severity: 3), (Category: ROUTING), (Description: A callback from the IOX-XR infrastructure was not handled by the MPLS-TE process because it was received in the wrong thread. The TE process may now be in an inconsistent state with the rest of the system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. The te_control process may be restarted in order to recover from this situation.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CE_TFTP-6-INVALID_PROTOCOL_FIELD ### Response: (Severity: 6), (Category: IP), (Description: Received a packet with an invalid protocol field from EthServer. No action required, this packet will be ignored (dropped).), (Recommended Action: This is an informational message. No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ISIS-4-INTF_CS_SEC_REG ### Response: (Severity: 4), (Category: ROUTING), (Description: IS-IS failed to register for notification of Canary Stamp Security. This is may be due to lack of resources or an internal error (the error message will indicate which). It requires a restart of the process for recovery.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLAT_MCAST-3-ERR_STR ### Response: (Severity: 3), (Category: PLATFORM), (Description: PLATFORM MCAST, error information), (Recommended Action: Please collect the console log, multicast traces (show mfib trace loc <>, show mfib hardware ltrace location <>). Also notice if the error message is transient or persistent. Report to your technical support representative.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: OBFLINFRA_CLIENT-7-NUM_OF_SENSORS_OVERFLOW ### Response: (Severity: 7), (Category: OS), (Description: Cannot set more sensor ID than number of sensors.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: OBFLINFRA_INT-3-EVM_ERROR ### Response: (Severity: 3), (Category: OS), (Description: Failed in some event management functions.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: MPLS_LSD-7-ERR_GENERAL ### Response: (Severity: 7), (Category: ROUTING), (Description: Miscellaneous MPLS LSD error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PEX8111-3-WARN_INIT ### Response: (Severity: 3), (Category: PLATFORM), (Description: The message can be displayed whenever there is a driver initialization error.), (Recommended Action: The driver process will re-start and complete initialization of the switch device. However, if this message is seen for more than 5 times than please reload the card using -hw-module location <> reload and check if the message still occurs in subsequent reload.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FMGR-3-MATCH_TYPE_IN_ACL_NOT_SUPPORTED ### Response: (Severity: 3), (Category: PKT_INFRA), (Description: The following match criteria specified in an ACL are not supported as part of a QoS policy: Packet Length, TTL, TCP Flags. An ACE containing any of these match fields will be ignored i.e. it will not be programmed.), (Recommended Action: If the behavior is not acceptable, remove the Qos policy from the interface and re-apply it after removing the un-supported match criteria. 'no service-policy <policy-name> input|output')

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IKEv2-6-AUTHENTICATION_FAILED ### Response: (Severity: 6), (Category: SECURITY), (Description: Unable to authenticate IKEv2 security association with it's remote peer), (Recommended Action: Contact the remote peer's administrator.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: What is the purpose of the install verify healthcheck command in IOS XR? ### Response: The 'install verify healthcheck' command performs a set of system health checks before proceeding with an installation operation. It verifies that there is enough disk space, memory, and that the configuration is consistent across nodes.

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FIA_DRVR-3-ERR_EVM_CREATE ### Response: (Severity: 3), (Category: FABRIC), (Description: FIA driver failed to create an event manager during the driver initialization. The driver will be non-operational due to this error.), (Recommended Action: The driver will escalate the error to the Fault Management (FM) entity for further action. Verify that the driver will recover following action by the FM. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CPAK-2-LANE_4_HIGH_TEMP_ALARM ### Response: (Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature greater than or equal to the high temperature alarm threshold. The CPAK is the pluggable optics on the line cards. The temperature threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ETNA-1-ALARM_LOS_PORTP0 ### Response: (Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PIM-3-ERR_MGD_TIMER_GET_ROOT ### Response: (Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: VKG_IP_EA-3-ERR_MEM ### Response: (Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in IP EA. Typically, this is an error where the memory allocation / access fails. Here is a list of possible reasons for this message (not all-inclusive). 1) Memory exhaustion due to overall system load 2) Shared memory access failure 3) Memory leaks leading to resource exhaustion), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef ipv4 </RP> <LC> show cef ipv4 location <> show cef ipv4 trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ISIS-3-ERR_BAG_ENCODE ### Response: (Severity: 3), (Category: ROUTING), (Description: A process has requested information through SysDB, probably as the result of executing a show command. An attempt to encode data for this has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: OSPFv3-3-INIT ### Response: (Severity: 3), (Category: ROUTING), (Description: An error occurred during initialization, causing the OSPFv3 process to terminate.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CHKPT_PROXY-7-DEBUG ### Response: (Severity: 7), (Category: HA), (Description: Internal Debug Message), (Recommended Action: No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ISIS-3-SRGB_ERR ### Response: (Severity: 3), (Category: ROUTING), (Description: An error occured while processing a modification to the SRGB This is a fatal error and the IS-IS process will abort or become inconsistent. It may be possible to recover by restarting the isis process), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLAT_CLIENT-2-ENFORCE_EVAL_EXPIRED ### Response: (Severity: 2), (Category: LICENSE), (Description: The licensed feature has been used exceeding evalution period.), (Recommended Action: The customer should either register for license or disable the feature.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SPA-5-OIR_INSERTED ### Response: (Severity: 5), (Category: L2), (Description: For displaying SPA OIR.), (Recommended Action: none.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IPV4_MFWD_SKP-5-ERR_SYSDB_INIT ### Response: (Severity: 5), (Category: ROUTING), (Description: The MFWD-SKYWARP library encountered internal error during Sysdb init setup. The init setup will be retried for finite number of retries.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: telnet-6-ARM_ADDRESS ### Response: (Severity: 6), (Category: IP), (Description: 'The call to ip_addr_c_get_v4/v6_best() failed'), (Recommended Action: *SH_TECH*)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FIA-3-ERR_FIA_DRV_DEV_ACCESS ### Response: (Severity: 3), (Category: FABRIC), (Description: Fia Driver pcie initialization failed), (Recommended Action: reload the card If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: What is the purpose of the MPLS TE auto-tunnel mesh feature? ### Response: The MPLS TE auto-tunnel mesh feature enables the automatic creation of a full mesh of MPLS TE tunnels between a set of routers. It greatly simplifies the provisioning of TE tunnels in a full mesh topology. Auto-tunnels are created between each pair of routers in the specified mesh group.