Install From Package

Arch Linux

Rolling/Edge/Unstable

You can install Websurfx through the Aur, By running the following command (using paru):

paru -S websurfx-edge-git

After installing it you can run the websurfx server by running the following commands:

websurfx

Once you have started the server, open your preferred web browser and navigate to http://127.0.0.1:8080/ to start using Websurfx.

If you want to change the port or the ip or any other configuration setting checkout the configuration docs.

Stable

For the stable version, follow the same steps as above (as mentioned for the unstable/rolling/edge version) with the only difference being that the package to be installed for stable version is called websurfx-git instead of websurfx-edge-git.

NixOS

A flake.nix has been provided to allow installing websurfx easily. It utilizes nearsk to automatically generate a derivation based on Cargo.toml and Cargo.lock.

The Websurfx project provides 2 versions/flavours for the flake stable and rolling/unstable/edge. The steps for each are covered below in different sections.

Rolling/Edge/Unstable

To get started, First clone the repository, edit the config file which is located in the websurfx directory and then build and run the websurfx server by running the following commands:

git clone https://github.com/neon-mmd/websurfx.git
cd websurfx
cp -rf ./websurfx/ ~/.config/
$ mkdir /opt/websurfx/
$ cp -rf ./public/ /opt/websurfx/
nix build .#websurfx
nix run .#websurfx

Note In the above command the dollar sign($) refers to running the command in privilaged mode by using utilities sudo, doas, pkgexec or any other privilage access methods.

Once you have run the above set of commands, then open your preferred web browser and navigate to http://127.0.0.1:8080/ to start using Websurfx.

If you want to change the port or the ip or any other configuration setting checkout the configuration docs.

Optionally, you may include it in your own flake by adding this repo to its inputs and adding it to environment.systemPackages as follows:

{
  description = "My awesome configuration";

  inputs = {
    websurfx.url = "github:neon-mmd/websurfx";
  };

  outputs = { nixpkgs, ... }@inputs: {
    nixosConfigurations = {
      hostname = nixpkgs.lib.nixosSystem {
        system = "x86_64-linux";
        modules = [{
          environment.systemPackages = [inputs.websurfx.packages.x86_64-linux.websurfx];
        }];
      };
    };
  };
}

Stable

For the stable version, follow the same steps as above (as mentioned for the unstable/rolling/edge version) with an addition of one command which has to be performed after cloning and changing directory into the repository which makes the building step as follows:

git clone https://github.com/neon-mmd/websurfx.git
cd websurfx
git checkout stable
cp -rf ./websurfx/ ~/.config/
$ mkdir /opt/websurfx/
$ cp -rf ./public/ /opt/websurfx/
nix build .#websurfx
nix run .#websurfx

Note In the above command the dollar sign($) refers to running the command in privilaged mode by using utilities sudo, doas, pkgexec or any other privilage access methods.

Other Distros

The package is currently not available on other Linux distros. With contribution and support it can be made available on other distros as well 🙂.

Install From Source

Before you can start building websurfx, you will need to have Cargo installed on your system. You can find the installation instructions here.

Stable

To get started with Websurfx, clone the repository, edit the config file which is located in the websurfx directory and install redis server by following the instructions located here and then build and run the websurfx server by running the following commands:

git clone https://github.com/neon-mmd/websurfx.git
cd websurfx
git checkout stable
cargo build -r
redis-server --port 8082 &
./target/release/websurfx

Once you have started the server, open your preferred web browser and navigate to http://127.0.0.1:8080/ to start using Websurfx.

If you want to change the port or the ip or any other configuration setting checkout the configuration docs.

Rolling/Edge/Unstable

If you want to use the rolling/edge branch, run the following commands instead:

git clone https://github.com/neon-mmd/websurfx.git
cd websurfx

Once you have changed the directory to the websurfx directory then follow the build options listed below:

Hybrid Cache

For more information on the features and their pros and cons. see: Features

To build the search engine with the Hybrid caching feature. Run the following build command:

cargo build -r --features redis-cache

Memory Cache (Default Feature)

For more information on the features and their pros and cons. see: Features

To build the search engine with the In-Memory caching feature. Run the following build command:

cargo build -r

No Cache

For more information on the features and their pros and cons. see: Features

To build the search engine with the No caching feature. Run the following build command:

cargo build -r --no-default-features

Redis Cache

For more information on the features and their pros and cons. see: Features

To build the search engine with the hybrid caching feature. Run the following build command:

cargo build -r --no-default-features --features redis-cache

Optionally, If you have build the app with the Redis cacheor Hybrid cache feature (as mentioned above) then before launching the search engine run the following command:
redis-server --port 8082 &

Once you have finished building the search engine. then run the following command to start the search engine:

./target/release/websurfx

Once you have started the server, then launch your preferred web browser and navigate to http://127.0.0.1:8080/ to start using Websurfx.

If you want to change the port or the ip or any other configuration setting checkout the configuration docs.

Docker Deployment

Before you start, you will need Docker installed on your system first.

Prebuild

The Websurfx project provides several prebuild images based on the different features provided by the search engine. To get started using the prebuild image, you will first need to create a docker-compose.yml file with the following content:

---
version: '3.9'
services:
  app:
    # Comment the line below if you don't want to use the `hybrid/latest` image.
    image: neonmmd/websurfx:latest
    # Uncomment the line below if you want to use the `no cache` image.
    # image: neonmmd/websurfx:nocache
    # Uncomment the line below if you want to use the `memory` image.
    # image: neonmmd/websurfx:memory
    # Uncomment the line below if you want to use the `redis` image.
    # image: neonmmd/websurfx:redis
    ports:
      - 8080:8080
    # Uncomment the following lines if you are using the `hybrid/latest` or `redis` image.
    # depends_on:
    #   - redis
    # links:
    #   - redis
    volumes:
      - ./websurfx/:/etc/xdg/websurfx/
  # Uncomment the following lines if you are using the `hybrid/latest` or `redis` image.
  # redis:
  #   image: redis:latest

Then make sure to edit the docker-compose.yml file as required. After that create a directory websurfx in the directory you have placed the docker-compose.yml file, and then in the new directory create two new empty files named allowlist.txt and blocklist.txt. Finally, create a new config file config.lua with the default configuration, which looks something like this:

-- ### General ###
logging = true -- an option to enable or disable logs.
debug = false -- an option to enable or disable debug mode.
threads = 8 -- the amount of threads that the app will use to run (the value should be greater than 0).

-- ### Server ###
port = "8080" -- port on which server should be launched
binding_ip = "0.0.0.0" --ip address on the which server should be launched.
production_use = false -- whether to use production mode or not (in other words this option should be used if it is to be used to host it on the server to provide a service to a large number of users (more than one))
-- if production_use is set to true
-- There will be a random delay before sending the request to the search engines, this is to prevent DDoSing the upstream search engines from a large number of simultaneous requests.
request_timeout = 30 -- timeout for the search requests sent to the upstream search engines to be fetched (value in seconds).
rate_limiter = {
    number_of_requests = 20, -- The number of request that are allowed within a provided time limit.
    time_limit = 3, -- The time limit in which the quantity of requests that should be accepted.
}

-- ### Search ###
-- Filter results based on different levels. The levels provided are:
-- {{
-- 0 - None
-- 1 - Low
-- 2 - Moderate
-- 3 - High
-- 4 - Aggressive
-- }}
safe_search = 2

-- ### Website ###
-- The different colorschemes provided are:
-- {{
-- catppuccin-mocha
-- dark-chocolate
-- dracula
-- gruvbox-dark
-- monokai
-- nord
-- oceanic-next
-- one-dark
-- solarized-dark
-- solarized-light
-- tokyo-night
-- tomorrow-night
-- }}
colorscheme = "catppuccin-mocha" -- the colorscheme name which should be used for the website theme
theme = "simple" -- the theme name which should be used for the website

-- ### Caching ###
redis_url = "redis://redis:6379" -- redis connection url address on which the client should connect on.

-- ### Search Engines ###
upstream_search_engines = {
    DuckDuckGo = true,
    Searx = false,
} -- select the upstream search engines from which the results should be fetched.

Then run the following command to deploy the search engine:

$ docker compose up -d

Note In the above command the dollar sign($) refers to running the command in privilaged mode by using utilities sudo, doas, pkgexec or any other privilage access methods.

Then launch the browser of your choice and navigate to http://:.

Note The official prebuild images only support stable versions of the app and will not support rolling/edge/unstable versions. But with support and contribution it could be made available for these versions as well 🙂.

Manual Deployment

This section covers how to deploy the app with docker manually by manually building the image and deploying it.

Note This section is provided for those who want to futher customize the docker image or for those who are extra cautious about security.

Warning A note of caution the project currently only supports x86-64 architecture and as such we do not recommend deploying the project on devices with other architectures. Though if you still want to do it then do it at your own risk.

Unstable/Edge/Rolling

First clone the the repository by running the following command:

git clone https://github.com/neon-mmd/websurfx.git
cd websurfx

After that edit the config.lua file located under websurfx directory. In the config file you will specifically need to change to values which is binding_ip_addr and redis_connection_url which should make the config look something like this:

-- ### General ###
logging = true -- an option to enable or disable logs.
debug = false -- an option to enable or disable debug mode.
threads = 8 -- the amount of threads that the app will use to run (the value should be greater than 0).

-- ### Server ###
port = "8080" -- port on which server should be launched
binding_ip = "0.0.0.0" --ip address on the which server should be launched.
production_use = false -- whether to use production mode or not (in other words this option should be used if it is to be used to host it on the server to provide a service to a large number of users (more than one))
-- if production_use is set to true
-- There will be a random delay before sending the request to the search engines, this is to prevent DDoSing the upstream search engines from a large number of simultaneous requests.
request_timeout = 30 -- timeout for the search requests sent to the upstream search engines to be fetched (value in seconds).
rate_limiter = {
    number_of_requests = 20, -- The number of request that are allowed within a provided time limit.
    time_limit = 3, -- The time limit in which the quantity of requests that should be accepted.
}

-- ### Search ###
-- Filter results based on different levels. The levels provided are:
-- {{
-- 0 - None
-- 1 - Low
-- 2 - Moderate
-- 3 - High
-- 4 - Aggressive
-- }}
safe_search = 2

-- ### Website ###
-- The different colorschemes provided are:
-- {{
-- catppuccin-mocha
-- dark-chocolate
-- dracula
-- gruvbox-dark
-- monokai
-- nord
-- oceanic-next
-- one-dark
-- solarized-dark
-- solarized-light
-- tokyo-night
-- tomorrow-night
-- }}
colorscheme = "catppuccin-mocha" -- the colorscheme name which should be used for the website theme
theme = "simple" -- the theme name which should be used for the website

-- ### Caching ###
redis_url = "redis://redis:6379" -- redis connection url address on which the client should connect on.

-- ### Search Engines ###
upstream_search_engines = {
    DuckDuckGo = true,
    Searx = false,
} -- select the upstream search engines from which the results should be fetched.

After this make sure to edit the docker-compose.yml and Dockerfile files as required and run the following command to deploy the app:

$ docker compose up -d --build

Note In the above command the dollar sign($) refers to running the command in privilaged mode by using utilities sudo, doas, pkgexec or any other privilage access methods.

This will take around 5-10 mins for first deployment, afterwards the docker build stages will be cached so it will be faster to be build from next time onwards. After the above step finishes launch your preferred browser and then navigate to http://<ip_address_of_the_device>:<whatever_port_you_provided_in_the_config>.

Stable

For the stable version, follow the same steps as above (as mentioned for the unstable/rolling/edge version) with an addition of one command which has to be performed after cloning and changing directory into the repository which makes the cloning step as follows:

git clone https://github.com/neon-mmd/websurfx.git
cd websurfx
git checkout stable

⬅️ Go back to Home