Hugging Face's logo

Transformers documentation

Load adapters with 🤗 PEFT

You are viewing main version, which requires installation from source. If you'd like regular pip install, checkout the latest stable version (v4.47.1).
Hugging Face's logo
Join the Hugging Face community

and get access to the augmented documentation experience

to get started

Load adapters with 🤗 PEFT

Parameter-Efficient Fine Tuning (PEFT) methods freeze the pretrained model parameters during fine-tuning and add a small number of trainable parameters (the adapters) on top of it. The adapters are trained to learn task-specific information. This approach has been shown to be very memory-efficient with lower compute usage while producing results comparable to a fully fine-tuned model.

Adapters trained with PEFT are also usually an order of magnitude smaller than the full model, making it convenient to share, store, and load them.

The adapter weights for a OPTForCausalLM model stored on the Hub are only ~6MB compared to the full size of the model weights, which can be ~700MB.

If you’re interested in learning more about the 🤗 PEFT library, check out the documentation.

Setup

Get started by installing 🤗 PEFT:

pip install peft

If you want to try out the brand new features, you might be interested in installing the library from source:

pip install git+https://github.com/huggingface/peft.git

Supported PEFT models

🤗 Transformers natively supports some PEFT methods, meaning you can load adapter weights stored locally or on the Hub and easily run or train them with a few lines of code. The following methods are supported:

If you want to use other PEFT methods, such as prompt learning or prompt tuning, or learn about the 🤗 PEFT library in general, please refer to the documentation.

Load a PEFT adapter

To load and use a PEFT adapter model from 🤗 Transformers, make sure the Hub repository or local directory contains an adapter_config.json file and the adapter weights, as shown in the example image above. Then you can load the PEFT adapter model using the AutoModelFor class. For example, to load a PEFT adapter model for causal language modeling:

  1. specify the PEFT model id
  2. pass it to the AutoModelForCausalLM class
from transformers import AutoModelForCausalLM, AutoTokenizer

peft_model_id = "ybelkada/opt-350m-lora"
model = AutoModelForCausalLM.from_pretrained(peft_model_id)

You can load a PEFT adapter with either an AutoModelFor class or the base model class like OPTForCausalLM or LlamaForCausalLM.

You can also load a PEFT adapter by calling the load_adapter method:

from transformers import AutoModelForCausalLM, AutoTokenizer

model_id = "facebook/opt-350m"
peft_model_id = "ybelkada/opt-350m-lora"

model = AutoModelForCausalLM.from_pretrained(model_id)
model.load_adapter(peft_model_id)

Check out the API documentation section below for more details.

Load in 8bit or 4bit

The bitsandbytes integration supports 8bit and 4bit precision data types, which are useful for loading large models because it saves memory (see the bitsandbytes integration guide to learn more). Add the load_in_8bit or load_in_4bit parameters to from_pretrained() and set device_map="auto" to effectively distribute the model to your hardware:

from transformers import AutoModelForCausalLM, AutoTokenizer, BitsAndBytesConfig

peft_model_id = "ybelkada/opt-350m-lora"
model = AutoModelForCausalLM.from_pretrained(peft_model_id, quantization_config=BitsAndBytesConfig(load_in_8bit=True))

Add a new adapter

You can use ~peft.PeftModel.add_adapter to add a new adapter to a model with an existing adapter as long as the new adapter is the same type as the current one. For example, if you have an existing LoRA adapter attached to a model:

from transformers import AutoModelForCausalLM, OPTForCausalLM, AutoTokenizer
from peft import LoraConfig

model_id = "facebook/opt-350m"
model = AutoModelForCausalLM.from_pretrained(model_id)

lora_config = LoraConfig(
    target_modules=["q_proj", "k_proj"],
    init_lora_weights=False
)

model.add_adapter(lora_config, adapter_name="adapter_1")

To add a new adapter:

# attach new adapter with same config
model.add_adapter(lora_config, adapter_name="adapter_2")

Now you can use ~peft.PeftModel.set_adapter to set which adapter to use:

# use adapter_1
model.set_adapter("adapter_1")
output_disabled = model.generate(**inputs)
print(tokenizer.decode(output_disabled[0], skip_special_tokens=True))

# use adapter_2
model.set_adapter("adapter_2")
output_enabled = model.generate(**inputs)
print(tokenizer.decode(output_enabled[0], skip_special_tokens=True))

Enable and disable adapters

Once you’ve added an adapter to a model, you can enable or disable the adapter module. To enable the adapter module:

from transformers import AutoModelForCausalLM, OPTForCausalLM, AutoTokenizer
from peft import PeftConfig

model_id = "facebook/opt-350m"
adapter_model_id = "ybelkada/opt-350m-lora"
tokenizer = AutoTokenizer.from_pretrained(model_id)
text = "Hello"
inputs = tokenizer(text, return_tensors="pt")

model = AutoModelForCausalLM.from_pretrained(model_id)
peft_config = PeftConfig.from_pretrained(adapter_model_id)

# to initiate with random weights
peft_config.init_lora_weights = False

model.add_adapter(peft_config)
model.enable_adapters()
output = model.generate(**inputs)

To disable the adapter module:

model.disable_adapters()
output = model.generate(**inputs)

Train a PEFT adapter

PEFT adapters are supported by the Trainer class so that you can train an adapter for your specific use case. It only requires adding a few more lines of code. For example, to train a LoRA adapter:

If you aren’t familiar with fine-tuning a model with Trainer, take a look at the Fine-tune a pretrained model tutorial.

  1. Define your adapter configuration with the task type and hyperparameters (see ~peft.LoraConfig for more details about what the hyperparameters do).
from peft import LoraConfig

peft_config = LoraConfig(
    lora_alpha=16,
    lora_dropout=0.1,
    r=64,
    bias="none",
    task_type="CAUSAL_LM",
)
  1. Add adapter to the model.
model.add_adapter(peft_config)
  1. Now you can pass the model to Trainer!
trainer = Trainer(model=model, ...)
trainer.train()

To save your trained adapter and load it back:

model.save_pretrained(save_dir)
model = AutoModelForCausalLM.from_pretrained(save_dir)

Add additional trainable layers to a PEFT adapter

You can also fine-tune additional trainable adapters on top of a model that has adapters attached by passing modules_to_save in your PEFT config. For example, if you want to also fine-tune the lm_head on top of a model with a LoRA adapter:

from transformers import AutoModelForCausalLM, OPTForCausalLM, AutoTokenizer
from peft import LoraConfig

model_id = "facebook/opt-350m"
model = AutoModelForCausalLM.from_pretrained(model_id)

lora_config = LoraConfig(
    target_modules=["q_proj", "k_proj"],
    modules_to_save=["lm_head"],
)

model.add_adapter(lora_config)

API docs

class transformers.integrations.PeftAdapterMixin

< >

( )

A class containing all functions for loading and using adapters weights that are supported in PEFT library. For more details about adapters and injecting them on a transformer-based model, check out the documentation of PEFT library: https://huggingface.co./docs/peft/index

Currently supported PEFT methods are all non-prefix tuning methods. Below is the list of supported PEFT methods that anyone can load, train and run with this mixin class:

Other PEFT models such as prompt tuning, prompt learning are out of scope as these adapters are not “injectable” into a torch module. For using these methods, please refer to the usage guide of PEFT library.

With this mixin, if the correct PEFT version is installed, it is possible to:

  • Load an adapter stored on a local path or in a remote Hub repository, and inject it in the model
  • Attach new adapters in the model and train them with Trainer or by your own.
  • Attach multiple adapters and iteratively activate / deactivate them
  • Activate / deactivate all adapters from the model.
  • Get the state_dict of the active adapter.

load_adapter

< >

( peft_model_id: typing.Optional[str] = None adapter_name: typing.Optional[str] = None revision: typing.Optional[str] = None token: typing.Optional[str] = None device_map: typing.Optional[str] = 'auto' max_memory: typing.Optional[str] = None offload_folder: typing.Optional[str] = None offload_index: typing.Optional[int] = None peft_config: typing.Dict[str, typing.Any] = None adapter_state_dict: typing.Optional[typing.Dict[str, ForwardRef('torch.Tensor')]] = None low_cpu_mem_usage: bool = False is_trainable: bool = False adapter_kwargs: typing.Optional[typing.Dict[str, typing.Any]] = None )

Parameters

  • peft_model_id (str, optional) — The identifier of the model to look for on the Hub, or a local path to the saved adapter config file and adapter weights.
  • adapter_name (str, optional) — The adapter name to use. If not set, will use the default adapter.
  • revision (str, optional, defaults to "main") — The specific model version to use. It can be a branch name, a tag name, or a commit id, since we use a git-based system for storing models and other artifacts on huggingface.co, so revision can be any identifier allowed by git.

    To test a pull request you made on the Hub, you can pass revision="refs/pr/<pr_number>".
  • token (str, optional) — Whether to use authentication token to load the remote folder. Useful to load private repositories that are on HuggingFace Hub. You might need to call huggingface-cli login and paste your tokens to cache it.
  • device_map (str or Dict[str, Union[int, str, torch.device]] or int or torch.device, optional) — A map that specifies where each submodule should go. It doesn’t need to be refined to each parameter/buffer name, once a given module name is inside, every submodule of it will be sent to the same device. If we only pass the device (e.g., "cpu", "cuda:1", "mps", or a GPU ordinal rank like 1) on which the model will be allocated, the device map will map the entire model to this device. Passing device_map = 0 means put the whole model on GPU 0.

    To have Accelerate compute the most optimized device_map automatically, set device_map="auto". For more information about each option see designing a device map.

  • max_memory (Dict, optional) — A dictionary device identifier to maximum memory. Will default to the maximum memory available for each GPU and the available CPU RAM if unset.
  • offload_folder (str or os.PathLike, optional) — If the device_map contains any value "disk", the folder where we will offload weights.
  • offload_index (int, optional) — offload_index argument to be passed to accelerate.dispatch_model method.
  • peft_config (Dict[str, Any], optional) — The configuration of the adapter to add, supported adapters are non-prefix tuning and adaption prompts methods. This argument is used in case users directly pass PEFT state dicts
  • adapter_state_dict (Dict[str, torch.Tensor], optional) — The state dict of the adapter to load. This argument is used in case users directly pass PEFT state dicts
  • low_cpu_mem_usage (bool, optional, defaults to False) — Reduce memory usage while loading the PEFT adapter. This should also speed up the loading process. Requires PEFT version 0.13.0 or higher.
  • is_trainable (bool, optional, defaults to False) — Whether the adapter should be trainable or not. If False, the adapter will be frozen and can only be used for inference.
  • adapter_kwargs (Dict[str, Any], optional) — Additional keyword arguments passed along to the from_pretrained method of the adapter config and find_adapter_config_file method.

Load adapter weights from file or remote Hub folder. If you are not familiar with adapters and PEFT methods, we invite you to read more about them on PEFT official documentation: https://huggingface.co./docs/peft

Requires peft as a backend to load the adapter weights.

add_adapter

< >

( adapter_config adapter_name: typing.Optional[str] = None )

Parameters

  • adapter_config (~peft.PeftConfig) — The configuration of the adapter to add, supported adapters are non-prefix tuning and adaption prompts methods
  • adapter_name (str, optional, defaults to "default") — The name of the adapter to add. If no name is passed, a default name is assigned to the adapter.

If you are not familiar with adapters and PEFT methods, we invite you to read more about them on the PEFT official documentation: https://huggingface.co./docs/peft

Adds a fresh new adapter to the current model for training purpose. If no adapter name is passed, a default name is assigned to the adapter to follow the convention of PEFT library (in PEFT we use “default” as the default adapter name).

set_adapter

< >

( adapter_name: typing.Union[typing.List[str], str] )

Parameters

  • adapter_name (Union[List[str], str]) — The name of the adapter to set. Can be also a list of strings to set multiple adapters.

If you are not familiar with adapters and PEFT methods, we invite you to read more about them on the PEFT official documentation: https://huggingface.co./docs/peft

Sets a specific adapter by forcing the model to use a that adapter and disable the other adapters.

disable_adapters

< >

( )

If you are not familiar with adapters and PEFT methods, we invite you to read more about them on the PEFT official documentation: https://huggingface.co./docs/peft

Disable all adapters that are attached to the model. This leads to inferring with the base model only.

enable_adapters

< >

( )

If you are not familiar with adapters and PEFT methods, we invite you to read more about them on the PEFT official documentation: https://huggingface.co./docs/peft

Enable adapters that are attached to the model.

active_adapters

< >

( )

If you are not familiar with adapters and PEFT methods, we invite you to read more about them on the PEFT official documentation: https://huggingface.co./docs/peft

Gets the current active adapters of the model. In case of multi-adapter inference (combining multiple adapters for inference) returns the list of all active adapters so that users can deal with them accordingly.

For previous PEFT versions (that does not support multi-adapter inference), module.active_adapter will return a single string.

get_adapter_state_dict

< >

( adapter_name: typing.Optional[str] = None )

Parameters

  • adapter_name (str, optional) — The name of the adapter to get the state dict from. If no name is passed, the active adapter is used.

If you are not familiar with adapters and PEFT methods, we invite you to read more about them on the PEFT official documentation: https://huggingface.co./docs/peft

Gets the adapter state dict that should only contain the weights tensors of the specified adapter_name adapter. If no adapter_name is passed, the active adapter is used.

< > Update on GitHub

←Set up distributed training with 🤗 Accelerate Share your model→