Datasets:

ramixpe

/

sp_dataset_llama

like 0

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ANCP-4-MEM_THROTTLE ### Response: (Severity: 4), (Category: IP), (Description: ANCP process has received an event that it's memory usage has reached its budgeted threshold. Continued increase in memory usage could result in restart of ANCP process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PCIE-6-BUS_INFO_THRESHOLD_EXCEEDED ### Response: (Severity: 6), (Category: PLATFORM), (Description: A device has been detecting a PCIe bus error and it is exceeding threshold. The message has the device identification, error severity, and error type.), (Recommended Action: *RECUR*)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FGID_AGG-3-ERR_EVM_CREATE ### Response: (Severity: 3), (Category: FABRIC), (Description: The FGID aggregator was unable to create an event manager for processing messages and hence failed to initialize. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: How to troubleshoot an L2VPN not passing traffic? ### Response: To troubleshoot an L2VPN not passing traffic, verify the xconnect status, check the interface and pseudowire status, and ensure correct encapsulation and MTU settings. show l2vpn xconnect show interface GigabitEthernet0/0/0 show l2vpn atom vc

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ES_ACL-6-ESACCESSLOGV ### Response: None

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: How to configure BGP soft reconfiguration in IOS XR? ### Response: BGP soft reconfiguration in IOS XR is configured to allow the router to store received routes without modifying the BGP table. router bgp 65000 neighbor 203.0.113.8 soft-reconfiguration inbound commit

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLAT_L2FIB_LOCSW-7-INIT_ERROR ### Response: (Severity: 7), (Category: PLATFORM), (Description: Failed to initialize the LOCSW module in the platform L2FIB LOCSW component.), (Recommended Action: None, platform software will correct itself if this happens.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CMPP-4-EXIT_FAILED ### Response: (Severity: 4), (Category: INFRA), (Description: The specified process failed to notify the system manager that it was exiting. In very rare cases, this could result in the process not being restarted when it ought to be.), (Recommended Action: If the process in not running and it ought to be (ie, there is CMPP configuration remaining), then remove all CMPP configuration, commit this change, then re-apply the configuration.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FIA-1-SKT_SP0_INTR_CW_CRC_ERR_0 ### Response: (Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_CW_CRC_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SMC-7-UNEXPECTED_VALUE ### Response: (Severity: 7), (Category: SYSDB), (Description: The server has come across an unexpected value for the specified parameter.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CFP-2-LANE_8_HIGH_TX_POWER_ALARM ### Response: (Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power greater than or equal to the high Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Replace the CFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CEMA-3-MISMATCH_ERR ### Response: (Severity: 3), (Category: L2), (Description: A process on the line card that manages a SPA was restarted. As a part of restart, a mismatch was detected between user specified configuration and the actual configuration of SPA hardware.), (Recommended Action: The mismatch can be service affecting in certain cases. Please check if the entity specified in the error log and all it's children are functioning correctly. Contact Cisco TAC for further assistance.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ncs540l-1-RESTART_NOT_SUPPORTED_SUPPL ### Response: (Severity: 1), (Category: PLATFORM), (Description: This is an error message associated with RESTART_NOT_SUPPORTED See RESTART_NOT_SUPPORTED for explanation), (Recommended Action: See RESTART_NOT_SUPPORTED for explanation)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FIA-1-SKT_FI_INTR_RCTL0_HI_EOP_ERR_0 ### Response: (Severity: 1), (Category: FABRIC), (Description: SKT_FI_INTR_RCTL0_HI_EOP_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FABRIC_400G_POD-3-ASIC_ERR_INIT ### Response: (Severity: 3), (Category: FABRIC), (Description: The sfe-drvr process cannot initialize the infrastructure allow error capturing function for the PODs on the fabric card.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ISIS-6-FAIL_ADJADD ### Response: (Severity: 6), (Category: ROUTING), (Description: Failed to create adjacency to the displayed IS via the displayed interface for the reason specified.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: What is the purpose of the 'mpls traffic-eng tunnels' command in IOS XR? ### Response: The 'mpls traffic-eng tunnels' command is used to enable MPLS Traffic Engineering on an interface. It allows the interface to be used as part of an MPLS TE tunnel path. MPLS TE tunnels are used to provide explicit paths for traffic with specific bandwidth and other constraints.

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SPMCE-3-ERR_KD_MMAP ### Response: (Severity: 3), (Category: PLATFORM), (Description: Failed to mmap to Kernel dumper information in syspages.), (Recommended Action: This is a critical error which will cause process to restart for error recovery. Collect the syslog or console log. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SLICE_MGR_PROXY-3-SYSDB_BIND_ERROR ### Response: (Severity: 3), (Category: PLATFORM), (Description: Sysdb bind error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ISLM-4-ENTITLED_SESSIONS_EXCEEDED ### Response: (Severity: 4), (Category: SUBSCRIBER), (Description: This syslog is printed when the number of sessions is over the limit of the licenses available.), (Recommended Action: Install more licenses or move a license from another line card.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ETNA-1-ALARM_BDI_DEMD ### Response: (Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: LIBMIRROR-3-ERR_MEMORY ### Response: (Severity: 3), (Category: MGBL), (Description: 'mirror encountered a memory error (most likely ran out of memory), see message for more details'), (Recommended Action: *SH_TECH*)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PIM-3-ERR_INIT ### Response: (Severity: 3), (Category: ROUTING), (Description: Error during initialization.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PIM_MLDP_LIB-3-MLDP_FAIL ### Response: (Severity: 3), (Category: IP), (Description: An error occured while reading requests or processing a write request from the pim mldp consumer. The specific reason is provided in the message displayed. This message indicates that an error occurred in the ENS or NRS communication channel between the PIM and the MLDP process on the consumer side.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show mlib trace error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show mlib trace error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show pim trace mldp<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show pim trace mldp<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show buffers<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show buffers<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SPMCE-0-ECC_REBOOT ### Response: (Severity: 0), (Category: PLATFORM), (Description: Large numbers of single bit ECC errors have been detected on the sp node in the past hour. The node will be rebooted.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLAT_FIB-6-PRINT_INFO ### Response: (Severity: 6), (Category: PLATFORM), (Description: Print the data for debug purpose or for change of states), (Recommended Action: The message is just for information. No action is needed.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PRP_UPGRADE-3-PROC_AS_IO ### Response: (Severity: 3), (Category: MGBL), (Description: IO failure on process address space. Unable to detect board type.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: LTRACE_SYNC-7-FILE_WRONG_VERSION ### Response: (Severity: 7), (Category: OS), (Description: The file has wrong version.), (Recommended Action: Informational only.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: NP-2-TCAM_WRITE_PARITY_ERROR ### Response: (Severity: 2), (Category: PLATFORM), (Description: A parity error interrupt), (Recommended Action: This error can be corrected by reloading the LC using the command: 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BULKSTAT-4-SEC_URL_UNREACHABLE ### Response: (Severity: 4), (Category: SNMP), (Description: The Collected bulk data file could not be successfully transferred to the secondary network management station address destination specified in the error message. This condition can occur because the secondary network management station address is not configured or the configured secondary network management station address is unreachable. If a retention interval is not configured, the bulk data file will be immediately deleted. If a retention interval is configured, retries will be attempted for the configured number of times.), (Recommended Action: Check the connectivity to destination indicated by secondary network management station address indicated in the error message.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ETNA-1-ALARM_LOL_DEMB ### Response: (Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: EMUX-1-LOSS_OF_SYNC_FIA10 ### Response: (Severity: 1), (Category: PLATFORM), (Description: Loss of sync on interlaken interface on egress mux and fia 1), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SHELFMGRV2-6-NMON_CFG_APPLIED ### Response: (Severity: 6), (Category: PLATFORM), (Description: This message indicates that node is configured in NMON (No MONitor) mode by the user and would not be reloaded by shelfmgr until restored back to MON config. Primary purpose of configuring node in NMON is to analyze and debug the node or its card behavior. Exception: shelfmgr ignores node's NMON config on occurence of a critical alarm at node's end.), (Recommended Action: No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: VIC-4-ENV_FAILURE ### Response: (Severity: 4), (Category: PLATFORM), (Description: This message provides information about the fault occurred on the interface.), (Recommended Action: The message is just for information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IPV4_MRIB-3-FGID_REMOVE_ERR ### Response: (Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: MPLS_TE-5-RSVP_FRR ### Response: (Severity: 5), (Category: ROUTING), (Description: RSVP triggered FRR on an LSP.), (Recommended Action: None. This is a solicited message and is informative only.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: EMUX-3-RX_MAX_LEN_ERR_FIA10 ### Response: (Severity: 3), (Category: PLATFORM), (Description: Packet maximum length error FIA 10 interface.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CPAK-3-LOW_BIAS_WARNING ### Response: (Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK bias less than or equal to the low laser bias warning threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLAT_THOR_L2FIB_VPLS-3-CERR_WARNING ### Response: (Severity: 3), (Category: PLATFORM), (Description: Failed to initialize the cerrno module in the platform L2FIB component.), (Recommended Action: None, platform software will correct itself if this happens.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BGP-4-PATH_ELEM_LIMIT ### Response: (Severity: 4), (Category: ROUTING), (Description: An attempt was made to create a path element beyond the maximum limit. The advertisement and installation of the network in the BGP table may be inconsistent with additional-paths configuration.), (Recommended Action: Revisit additional-paths configuration and the total number of paths learnt for a particular network.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: What is the purpose of the protocol shutdown command in IS-IS? ### Response: The protocol shutdown command is used to administratively shut down IS-IS on a router. When IS-IS is shut down, the router does not send or receive IS-IS packets and all IS-IS adjacencies are torn down. This command is useful for gracefully shutting down IS-IS during maintenance or troubleshooting.

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: DIAGS-3-FAB_MCAST_SC0_FAILED ### Response: (Severity: 3), (Category: PLATFORM), (Description: A problem is detected by loopback test to the first Crossbar chip (chip#0) on this RSP.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ISIS-3-LABEL_ERR ### Response: (Severity: 3), (Category: ROUTING), (Description: An error occured while processing a label in the label table Most likely this is a fatal error. Only recovery is to restart the isis process), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: cds_proxy-3-PROC_ROLE_CHANGE ### Response: (Severity: 3), (Category: OS), (Description: Failed to register the role change with the system manager.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FIB-4-MPLS_UNSUPPORTED_BGP_LU_CHAIN ### Response: (Severity: 4), (Category: ROUTING), (Description: In label create/update, bgp lu chain is invalid. Most often an intermediate state), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLAT_FIB-3-WARNING_RT ### Response: (Severity: 3), (Category: PLATFORM), (Description: This is an error message in the ASR9K platform FIB specific code software to indicate anomolies that are not FATAL. This error is most likely caused by a temporary situation, so is unlikely to re-occur.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <slot number>), FIB platform trace (show cef platform trace all loc <slot number>). Also notice if the error message is transient or persistent. Report to your technical support representative.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: QFP_DRIVER-2-LOCKDOWN ### Response: (Severity: 2), (Category: L2), (Description: A fatal error has caused the CPP driver to LOCKDOWN.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BRIDGE-1-STATEMC_0_ERR2_1 ### Response: (Severity: 1), (Category: PLATFORM), (Description: State machine - 0 ran into error-2 on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: QSFP_PLUS-3-LANE_0_HIGH_RX_POWER_WARNING ### Response: (Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ Rx power greater than or equal to the high Rx power warning threshold. The QSFP+ is the pluggable optics on the line cards. The Rx power threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ILITE-3-GET_CONFIG_ERROR ### Response: (Severity: 3), (Category: PLATFORM), (Description: Unable to get configuration details, this may be a program level error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PAKSRV-7-BADPTCL_DUMP ### Response: (Severity: 7), (Category: PKT_INFRA), (Description: Particle body corruption is detected. This message follows a BADPAK message and dumps the first few bytes of the particle body and the last few bytes of the one before.), (Recommended Action: None. This is message is only for debugging purpose.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ETNA-1-ALARM_LOS_PORTS1 ### Response: (Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ISIS-4-KEY_DEACTIVATE_FAIL ### Response: (Severity: 4), (Category: ROUTING), (Description: A call to the Key Chain library failed. This may indicate an internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: gsp-3-INCORRECT_RSI ### Response: (Severity: 3), (Category: OS), (Description: 'Received a RSI node id for a GSP group which is different than an expected value.'), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CHDLC_MA-4-ERR_PKT_API_HANDLER ### Response: (Severity: 4), (Category: L2), (Description: A failure occured whilst handling an event received from the packet thread.), (Recommended Action: *RECUR*)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SYSDB-3-HEALTH_CHK_FAIL ### Response: (Severity: 3), (Category: SYSDB), (Description: Due to the error shown, sysdb cannot start the health check on sysDB sub system.), (Recommended Action: In most cases, this would be transient error. However, if this happens repeatedly, please collect 'show tech sysdb'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FIA-1-SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_0_0 ### Response: (Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_0 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SYSDB-7-COUNT_HIGH ### Response: (Severity: 7), (Category: SYSDB), (Description: SysDB connection count has crossed the threshold.), (Recommended Action: This might be normal. In case the process in message crashes, copy process core file and /tmp/sysdb_debug_conn_threshold_output_*.txt files and contact Cisco Support.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SYSLOG-1-LOG_ALERT ### Response: (Severity: 1), (Category: OS), (Description: An Error message logged.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLUTLU-3-PTMM_INIT_PROC_FAILED ### Response: (Severity: 3), (Category: PLATFORM), (Description: An error was encountered while initialising the PLU/TLU memory manager This condition can occur during: 1. Memory init 2. Checkpoint Init 3. PLU/TLU specific Init 4. EDM Init), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FWD_NETIO_TOPAZ_DLL-3-INGRESSQ_CREATE_FAILED ### Response: (Severity: 3), (Category: PKT_INFRA), (Description: FWD was not able to create one of the ingressq queues.), (Recommended Action: No Action required Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: EVM-4-IONOTIFY_FAIL ### Response: (Severity: 4), (Category: OS), (Description: Event-manager is unable to reregister for subsequent notifications with a server.), (Recommended Action: This is an internal error and should be reported to TAC if all attempts fail. Please collect the output of 'show proc files <jobid> detail location <location>' for the process in question.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: TEJAS_DRV-6-GENERIC_INFO ### Response: (Severity: 6), (Category: PLATFORM), (Description: The message is used to report TEJAS DRIVER generic info.), (Recommended Action: Contact support.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CFP-2-LANE_13_LOW_BIAS_ALARM ### Response: (Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: What is the purpose of the install prepare command in IOS XR? ### Response: The 'install prepare' command is used to prepare the system for an installation operation. It checks for available disk space, performs configuration checks, and determines which processes will be affected by the installation.

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BGP-3-EDM_INIT_FAILED ### Response: (Severity: 3), (Category: ROUTING), (Description: Initialization of the EDM server failed. The process will be restarted.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PMIPV6-3-BA_UNSPEC_FAIL_5 ### Response: (Severity: 3), (Category: IP), (Description: IPv4 HoA request option is not received in the PBU. This happens if the service configured for the MN on the LMA is IPv4 or Dual and that on the MAG is not matching.), (Recommended Action: Note the CoA address, IMSI (if available) and NAI from the error message. Run the following command on the MAG that corresponds to the above CoA address or IMSI. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show running-config | section mobile<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show running-config | section mobile<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Note the service type of the MN or Logical-MN (corresponding to the NAI noted above) under domain configuration and Logical-MN configuration. Run the following command on the LMA. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show running-config ipv6 mobile<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show running-config ipv6 mobile<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Note the service type of the MN or Logical-MN (corresponding to the NAI noted above) under domain configuration. If the service type configired on the MAG and the LMA is not the same, reconfigure matching service type on the MAG and/or the LMA. If the issue persists, do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IMFPGA-3-PHY_OPTICS_SERDES_FAULT ### Response: (Severity: 3), (Category: PLATFORM), (Description: Serdes signal fault detected/cleared between phy and optics.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SPM-3-ERROR_OPEN_SECURE ### Response: (Severity: 3), (Category: SECURITY), (Description: An attempt to open a secure file failed.), (Recommended Action: 'Retry the operation. If this message recurs, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SPB_I2C-7-BUS_UNHANG_SUCCESS ### Response: (Severity: 7), (Category: PLATFORM), (Description: The I2C bus hang has been cleared successfully. I2C communication is restored on the bus.), (Recommended Action: 'No action is required.')

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CCV-5-INVALID_VLDN_METADATA ### Response: (Severity: 5), (Category: MGBL), (Description: This failure indicates that some validation metadata present on the device could not be loaded. This is typically indicative of validation rules that reference a schema path in an optional package that is not currently installed. In such cases it does not present a problem because the corresponding configuration is not supported. As such this message can usually be ignored unless issues with configuration validation functionality are seen.), (Recommended Action: None, unless further issues with configuration validation are seen, in which case, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ICPE_GCO-5-TRANSFER_FAILED ### Response: (Severity: 5), (Category: PKT_INFRA), (Description: Failed to copy the specified file onto the host. Run 'show nv satellite install verbose' for more information.), (Recommended Action: Check the specified file exists, and if it is on a remote server check the link to that server is valid. Then re-try the operation.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: RLOGIND-6-INFO_GENERAL ### Response: (Severity: 6), (Category: IP), (Description: The rlogind encountered some problem in genric nature or plain information.), (Recommended Action: 'No action is required.')

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CCC-3-HOST_ERROR_EVENT ### Response: (Severity: 3), (Category: DRIVER), (Description: HOST has reported a error event.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLAT_FIB_MPLS-3-ERR_STR ### Response: (Severity: 3), (Category: PLATFORM), (Description: A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. This message also provides an error code and a string interpretation of the error code. Here is a list of possible reasons for this message (not all-inclusive). - Failed to retrieve information from FIB objects. This condition indicates a problem with the software on the card where the error is seen. - Failed to initialize objects. This condition indicates a problem with the software on the card. Typically, this occurs when the software tries to initialize invalid objects. - Unexpected events. This condition indicates a problem where an event is triggered in the software unexpectedly on the card. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef trace location <> show cef platform trace all location <> </LC> <TECH> show tech cef show version show install summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLAT_FIB_GTRIE-3-ERR_INFO ### Response: (Severity: 3), (Category: PLATFORM), (Description: This is an error message in the ASR9K platform FIB specific code software to indicate anomolies that are not FATAL. This error is most likely caused by a temporary situation, so is unlikely to re-occur.), (Recommended Action: Please collect the console log, FIB traces (show cef trace loc <>), FIB platform trace (show cef platform trace all loc <>). Also notice if the error message is transient or persistent. Report to your technical support representative.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: NPUXBAR_BRIDGE-2-CPU_PKT_F3_SBE ### Response: (Severity: 2), (Category: PLATFORM), (Description: IBS from CPU packet FIFO 3 single bit error.), (Recommended Action: None.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: MRIB-4-FILTRVIOLERR ### Response: (Severity: 4), (Category: ROUTING), (Description: A client tried to modify a route attribute not owned by it), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CT_DSP-1-ALARM_LOS_PORTQ2 ### Response: (Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FDI-3-ERR_TLV_HDR ### Response: (Severity: 3), (Category: FABRIC), (Description: FSDB/Driver encountered a FDI message containing structure(s) which do not have a TLV header, or the message is too short to contain the structure(s) specified in the TLV header. This means that the TLV encoding code is missing and needs to be added to the appropriate structure. After an occurence of such error, it is likely that FSDB and Driver have gone out of sync.), (Recommended Action: Capture information as specified in the required_info section. Restart FSDB/appropriate driver (from whichever process context this error message was logged) to clean any 'out of sync' issues.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: TTY-3-MGMT_HOST_IP_ERROR ### Response: (Severity: 3), (Category: MGBL), (Description: The show line command was unable to get the host IP address.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: DIAGS-3-INVALID_DEVICE_ID ### Response: (Severity: 3), (Category: PLATFORM), (Description: Device identity readback value is incorrect), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SHELFMGR_HAL-6-CARD_POWERDOWN ### Response: (Severity: 6), (Category: PLATFORM), (Description: The Shelf Manager component has requested power disable on a line card or secondary RSP.), (Recommended Action: No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CFP-3-LANE_10_LOW_BIAS_WARNING ### Response: (Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IKE-3-BAD_DOI_NOTIFY ### Response: (Severity: 3), (Category: SECURITY), (Description: IKE found bad DOI notify), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IPV6_ACL-1-IPACCESSDLSYM ### Response: (Severity: 1), (Category: ACL), (Description: This message indicates that a process could not find the specified DLL name. The name of this DLL is included in the message. Functionalites of the process that failed to load this DLL will be impacted.), (Recommended Action: This message may occur during process initialization. Please try restarting the process that issued this error message with the command. <CmdBold>process restart <process_name> location <node id><NoCmdBold>. Process name should be printed in the message already.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: TCP_NSR-3-OUT_OF_SYNC ### Response: (Severity: 3), (Category: IP), (Description: One or more control messages could not be delivered, after several retries, to the partner TCP stack. This can leave the TCP stacks in a state that prevents NSR from being restored. However, periodic self-audit should correct the mismatch in state and should result in NSR being restored.), (Recommended Action: This may be due to a very basic problem with the communications infrastructure between the TCP stacks running on different nodes. Please collect the following information and restart the standby TCP process.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ISSUDIR-4-OPERATION_ISSU_ABORT_DONE_REMINDER ### Response: (Severity: 4), (Category: INSTALL), (Description: This message acts as a reminder that the ISSU has been held following an abort to enable system level triage.), (Recommended Action: The ISSU has been held following an abort to enable system level triage. When complete issue command <cmdBold>install activate issu abort cleanup<noCmdBold> or <cmdBold>install deactivate issu abort cleanup<noCmdBold> (as appropriate) to restore the system's RP redundancy and enable another ISSU.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: DIAG-3-SW_FAIL ### Response: (Severity: 3), (Category: DIAG), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the screen and gather the output of show tech-support and any other relevant information. Contact your technical support representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: What is the purpose of BGP soft reconfiguration? ### Response: BGP soft reconfiguration allows the router to store a copy of the routes received from a neighbor before any inbound policy is applied. If the inbound policy is changed, the stored routes can be re-evaluated without tearing down the BGP session. It is enabled with the neighbor soft-reconfiguration inbound command.

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: MLAP-3-WHITEBOX_EP_DI_MISMATCH_DETECTED ### Response: (Severity: 3), (Category: INFRA), (Description: Rx and Tx links terminate on different endpoint ports.), (Recommended Action: Determine if the event was due to a fault. If so, the root cause need wiring/connectivity check.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CCC-4-BENCH_MODE_DETECTED ### Response: (Severity: 4), (Category: DRIVER), (Description: The BENCH MODE is used for debugging the card out of the chassis, the jumper or DIP switch to enable this feature should not be set if the card is being inserted in the chassis.), (Recommended Action: Remove the setting before inserting the card back to the chassis.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: LISP-5-PROXY_ETR_REACHABILITY_CHANGE ### Response: (Severity: 5), (Category: IP), (Description: 'No route to reach proxy ETR so traffic drop is expected.'), (Recommended Action: 'Ensure router has connectivity to proxy ETR.')

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: INBAR_HB-7-ERR_EVM_CREATE ### Response: (Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while attempting to create an event manager. This failures affects the ability of the process to service various messages / pulses from other threads / processes. This facility is deemed crucial and the process automatically restarts on this failure. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: DAD-3-SYSDB_DELETE_FAIL ### Response: (Severity: 3), (Category: ROUTING), (Description: The DAD library attempts to delete the old protocol information before writing out the new information. This delete operation failed for the above reason.), (Recommended Action: restart policy_repository and check for re-occurence of issue)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: OPTICS-3-UPGRADE_CFP2_LASER_ON ### Response: (Severity: 3), (Category: PLATFORM), (Description: Cannot do FPD upgrade of CFP2 when its laser is on.), (Recommended Action: Shut the Optics Controller corresponding to this CFP2 and try upgrade again.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BRIDGE-2-MAC_0_RX_FRAME_ERR_3 ### Response: (Severity: 2), (Category: PLATFORM), (Description: MAC on NPU-0 received an errored frame interface on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BACKUPSSHD-3-ERR_SYSDB_DELETE ### Response: (Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SYSDB-4-SC_CFGMGR_ADD_DELETES ### Response: (Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CROSSBAR-1-IN_BUF_CRC_ERROR_LNK0 ### Response: (Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected excessive input buffer CRC error on link 0), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload the card using command: 'hw-module loc <> reload'. Please make sure all the cards in the chassis are properly seated and their ejector handle screws completely tightened. Also, check for any damage to the card and its backplane connectors. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)