| [ | |
| { | |
| "language": "en", | |
| "country": "India", | |
| "file_name": "xe_2022.pdf", | |
| "source": "https://gate.iitkgp.ac.in/documents/gatepapers/2022/xe_2022.pdf", | |
| "license": "Education and Research", | |
| "level": "Graduate Aptitude Test in Engineering (GATE)", | |
| "category_en": "Engineering Sciences", | |
| "category_original_lang": "इंजीनियरिंग विज्ञान", | |
| "original_question_num": 22, | |
| "question": "A heavy horizontal cylinder of diameter D supports a mass of liquid having density 𝜌 as shown in the figure. Find out the vertical component of force exerted by the liquid per unit length of the cylinder if g is the acceleration due to gravity.", | |
| "options": [ | |
| "𝞹D²𝜌g/4", | |
| "𝞹D²𝜌g/8", | |
| "𝞹D²𝜌g/2", | |
| "𝞹D²𝜌g/3" | |
| ], | |
| "answer": 1, | |
| "image_png": "xe_question_22.png", | |
| "image_information": "essential", | |
| "image_type": "diagram", | |
| "parallel_question_id": null | |
| }, | |
| { | |
| "language": "en", | |
| "country": "India", | |
| "file_name": "xe_2022.pdf", | |
| "source": "https://gate.iitkgp.ac.in/documents/gatepapers/2022/xe_2022.pdf", | |
| "license": "Education and Research", | |
| "level": "Graduate Aptitude Test in Engineering (GATE)", | |
| "category_en": "Engineering Sciences", | |
| "category_original_lang": "इंजीनियरिंग विज्ञान", | |
| "original_question_num": 23, | |
| "question": "The figure shows the developing zone and the fully developed region in a pipe flow where the steady flow takes place from left to right. The wall shear stress in the sections A, B, C, and D are given by 𝜏A ,𝜏B ,𝜏C , and 𝜏D , respectively. Select the correct statemen", | |
| "options": [ | |
| "𝜏A > 𝜏B", | |
| "𝜏B > 𝜏A", | |
| "𝜏C > 𝜏B", | |
| "𝜏C > 𝜏D" | |
| ], | |
| "answer": 0, | |
| "image_png": "xe_question_23.png", | |
| "image_information": "essential", | |
| "image_type": "diagram", | |
| "parallel_question_id": null | |
| }, | |
| { | |
| "language": "en", | |
| "country": "India", | |
| "file_name": "xe_2022.pdf", | |
| "source": "https://gate.iitkgp.ac.in/documents/gatepapers/2022/xe_2022.pdf", | |
| "license": "Education and Research", | |
| "level": "Graduate Aptitude Test in Engineering (GATE)", | |
| "category_en": "Engineering Sciences", | |
| "category_original_lang": "इंजीनियरिंग विज्ञान", | |
| "original_question_num": 24, | |
| "question": "The left hand column lists some non-dimensional numbers and the right hand column lists some physical phenomena. Indicate the correct combination", | |
| "options": [ | |
| "1-iii, 2-i, 3-ii, 4-iv", | |
| "1-i, 2-ii, 3-iv, 4-iii", | |
| "1-iv, 2-iii, 3-iv, 4-iii", | |
| "2-iv, 1-iii, 3-ii, 4-i" | |
| ], | |
| "answer": 0, | |
| "image_png": "xe_question_24.png", | |
| "image_information": "essential", | |
| "image_type": "table", | |
| "parallel_question_id": null | |
| }, | |
| { | |
| "language": "en", | |
| "country": "India", | |
| "file_name": "xe_2022.pdf", | |
| "source": "https://gate.iitkgp.ac.in/documents/gatepapers/2022/xe_2022.pdf", | |
| "license": "Education and Research", | |
| "level": "Graduate Aptitude Test in Engineering (GATE)", | |
| "category_en": "Engineering Sciences", | |
| "category_original_lang": "इंजीनियरिंग विज्ञान", | |
| "original_question_num": 31, | |
| "question": "Consider an inviscid flow through a smooth pipe which has a pitot-static tube arrangement as shown. Find the centre-line velocity in the pipe. Consider that the density of the fluid is 1000 kg/m3, acceleration due to gravity is 10 m/s2, and the specific gravity of the manometric fluid is 11.", | |
| "options": [ | |
| "2 m/s", | |
| "3 m/s", | |
| "5 m/s", | |
| "7 m/s" | |
| ], | |
| "answer": 0, | |
| "image_png": "xe_question_31.png", | |
| "image_information": "essential", | |
| "image_type": "diagram", | |
| "parallel_question_id": null | |
| }, | |
| { | |
| "language": "en", | |
| "country": "India", | |
| "file_name": "xe_2022.pdf", | |
| "source": "https://gate.iitkgp.ac.in/documents/gatepapers/2022/xe_2022.pdf", | |
| "license": "Education and Research", | |
| "level": "Graduate Aptitude Test in Engineering (GATE)", | |
| "category_en": "Engineering Sciences", | |
| "category_original_lang": "इंजीनियरिंग विज्ञान", | |
| "original_question_num": 33, | |
| "question": "A two-dimensional flow field is described by a combination of a source of strength m at the origin and a uniform flow, U, in the positive x-direction such that the velocity potential is given by. Find the distance aa'.", | |
| "options": [ | |
| "m/U", | |
| "2m/U", | |
| "8m/U", | |
| "m/2U" | |
| ], | |
| "answer": 3, | |
| "image_png": "xe_question_33.png", | |
| "image_information": "essential", | |
| "image_type": "diagram", | |
| "parallel_question_id": null | |
| }, | |
| { | |
| "language": "en", | |
| "country": "India", | |
| "file_name": "xe_2022.pdf", | |
| "source": "https://gate.iitkgp.ac.in/documents/gatepapers/2022/xe_2022.pdf", | |
| "license": "Education and Research", | |
| "level": "Graduate Aptitude Test in Engineering (GATE)", | |
| "category_en": "Engineering Sciences", | |
| "category_original_lang": "इंजीनियरिंग विज्ञान", | |
| "original_question_num": 45, | |
| "question": "Match the following materials with their corresponding bonding types.", | |
| "options": [ | |
| "P - 4; Q - 2; R - 3; S - 1", | |
| "P - 3; Q - 4; R - 2; S - 1", | |
| "P - 3; Q - 2; R - 1; S - 4", | |
| "P - 3; Q - 1; R - 4; S - 2" | |
| ], | |
| "answer": 2, | |
| "image_png": "xe_question_45.png", | |
| "image_information": "essential", | |
| "image_type": "table", | |
| "parallel_question_id": null | |
| }, | |
| { | |
| "language": "en", | |
| "country": "India", | |
| "file_name": "xe_2022.pdf", | |
| "source": "https://gate.iitkgp.ac.in/documents/gatepapers/2022/xe_2022.pdf", | |
| "license": "Education and Research", | |
| "level": "Graduate Aptitude Test in Engineering (GATE)", | |
| "category_en": "Engineering Sciences", | |
| "category_original_lang": "इंजीनियरिंग विज्ञान", | |
| "original_question_num": 55, | |
| "question": "Which one of the following samples of high-purity aluminium (Al) single crystal will plastically yield at the lowest applied load under ambient conditions? Loading axis is along the direction shown in the schematic.", | |
| "options": [ | |
| "(i)", | |
| "(ii)", | |
| "(iii)", | |
| "(iv)" | |
| ], | |
| "answer": 3, | |
| "image_png": "xe_question_55.png", | |
| "image_information": "essential", | |
| "image_type": "diagram", | |
| "parallel_question_id": null | |
| }, | |
| { | |
| "language": "en", | |
| "country": "India", | |
| "file_name": "xe_2022.pdf", | |
| "source": "https://gate.iitkgp.ac.in/documents/gatepapers/2022/xe_2022.pdf", | |
| "license": "Education and Research", | |
| "level": "Graduate Aptitude Test in Engineering (GATE)", | |
| "category_en": "Engineering Sciences", | |
| "category_original_lang": "इंजीनियरिंग विज्ञान", | |
| "original_question_num": 56, | |
| "question": "Refer to the schematic shown. Two dog-bone samples, labelled 1 and 2, of a Cu-alloy are tested under tension at room temperature to points “E” and “P”, respectively. Subsequently, they are unloaded completely and metallographically polished. Brinell hardness testing was performed in the gauge section of the samples. Which one of the following can be inferred about the measured Brinell hardness number (BHN)?", | |
| "options": [ | |
| "BHN of 1 > BHN of 2", | |
| "BHN of 1 = BHN of 2", | |
| "BHN of 1 < BHN of 2", | |
| "A conclusion about BHN of samples 1 and 2 cannot be made, with the provided information" | |
| ], | |
| "answer": 2, | |
| "image_png": "xe_question_56.png", | |
| "image_information": "essential", | |
| "image_type": "diagram", | |
| "parallel_question_id": null | |
| }, | |
| { | |
| "language": "en", | |
| "country": "India", | |
| "file_name": "xe_2022.pdf", | |
| "source": "https://gate.iitkgp.ac.in/documents/gatepapers/2022/xe_2022.pdf", | |
| "license": "Education and Research", | |
| "level": "Graduate Aptitude Test in Engineering (GATE)", | |
| "category_en": "Engineering Sciences", | |
| "category_original_lang": "इंजीनियरिंग विज्ञान", | |
| "original_question_num": 66, | |
| "question": "A force 𝐹 is applied at an angle 𝜃 = 30° on an elastic column as shown in the figure. 𝐸 and 𝐼 are respectively the Young’s modulus and area moment of inertia. The smallest magnitude of 𝐹 needed to cause buckling is", | |
| "options": [ | |
| "2𝝿²El/√3*L²", | |
| "√3𝝿²El/2L²", | |
| "𝝿²El/2L²", | |
| "2𝝿²El/L²" | |
| ], | |
| "answer": 0, | |
| "image_png": "xe_question_66.png", | |
| "image_information": "essential", | |
| "image_type": "diagram", | |
| "parallel_question_id": null | |
| }, | |
| { | |
| "language": "en", | |
| "country": "India", | |
| "file_name": "xe_2022.pdf", | |
| "source": "https://gate.iitkgp.ac.in/documents/gatepapers/2022/xe_2022.pdf", | |
| "license": "Education and Research", | |
| "level": "Graduate Aptitude Test in Engineering (GATE)", | |
| "category_en": "Engineering Sciences", | |
| "category_original_lang": "इंजीनियरिंग विज्ञान", | |
| "original_question_num": 68, | |
| "question": "A massless semicircular rod held fixed at end A is in the xy-plane, as shown in the figure. A force P along the negative z direction is acting at point B on the rod. The unit vectors along x, y and z directions are denoted respectively as i, j and k. Due to the applied force P, the cross-section of the rod at point D will be subjected to", | |
| "options": [ | |
| "a twisting moment 𝑃𝑅1 cos𝜃 𝐢, a bending moment 𝑃𝑅sin𝜃 𝐣, and a shear force 𝑃 𝐤", | |
| "a twisting moment 𝑃𝑅1 sin𝜃 𝐢, a bending moment 𝑃𝑅cos𝜃 𝐣, and a shear force 𝑃 𝐤", | |
| "a twisting moment 𝑃𝑅cos𝜃 1 𝐢, a bending moment 𝑃𝑅sin𝜃 𝐣, and a shear force 𝑃 𝐤", | |
| "a twisting moment 𝑃𝑅sin𝜃𝐢, a bending moment 𝑃𝑅 1 cos 𝜃 𝐣, and a shear force 𝑃 𝐤" | |
| ], | |
| "answer": 0, | |
| "image_png": "xe_question_68.png", | |
| "image_information": "essential", | |
| "image_type": "diagram", | |
| "parallel_question_id": null | |
| }, | |
| { | |
| "language": "en", | |
| "country": "India", | |
| "file_name": "xe_2022.pdf", | |
| "source": "https://gate.iitkgp.ac.in/documents/gatepapers/2022/xe_2022.pdf", | |
| "license": "Education and Research", | |
| "level": "Graduate Aptitude Test in Engineering (GATE)", | |
| "category_en": "Engineering Sciences", | |
| "category_original_lang": "इंजीनियरिंग विज्ञान", | |
| "original_question_num": 69, | |
| "question": "In the truss shown in the figure, all the members are pin jointed to each other. The members AB, BD, DE and DC have the same length. For the given loading, which of the following is the correct statement?", | |
| "options": [ | |
| "BD is a zero-force member, and AB and ED are in compression", | |
| "AB is in tension, ED is in compression, and BD is a zero-force member", | |
| "AB and DC are in tension, and BC is in compression", | |
| "ED is in tension, and DC and BC are in compression" | |
| ], | |
| "answer": 1, | |
| "image_png": "xe_question_69.png", | |
| "image_information": "essential", | |
| "image_type": "diagram", | |
| "parallel_question_id": null | |
| }, | |
| { | |
| "language": "en", | |
| "country": "India", | |
| "file_name": "xe_2022.pdf", | |
| "source": "https://gate.iitkgp.ac.in/documents/gatepapers/2022/xe_2022.pdf", | |
| "license": "Education and Research", | |
| "level": "Graduate Aptitude Test in Engineering (GATE)", | |
| "category_en": "Engineering Sciences", | |
| "category_original_lang": "इंजीनियरिंग विज्ञान", | |
| "original_question_num": 70, | |
| "question": "End B of the 2 m long rigid rod AB is constrained to move horizontally in the slot as shown in the figure and has a velocity of 1.0 i m/s. The angular velocity of the rod at the instant shown is 2 rad/s. The unit vectors along x and y directions are denoted respectively as i and j. The velocity of point A in m/s is then given by", | |
| "options": [ | |
| "(1-2√3)𝐢 + 2𝐣", | |
| "(1+2√3)𝐢 - 2𝐣", | |
| "-2√3𝐢 + 2𝐣", | |
| "2√3𝐢 - 2𝐣" | |
| ], | |
| "answer": 0, | |
| "image_png": "xe_question_70.png", | |
| "image_information": "essential", | |
| "image_type": "diagram", | |
| "parallel_question_id": null | |
| }, | |
| { | |
| "language": "en", | |
| "country": "India", | |
| "file_name": "xe_2022.pdf", | |
| "source": "https://gate.iitkgp.ac.in/documents/gatepapers/2022/xe_2022.pdf", | |
| "license": "Education and Research", | |
| "level": "Graduate Aptitude Test in Engineering (GATE)", | |
| "category_en": "Engineering Sciences", | |
| "category_original_lang": "इंजीनियरिंग विज्ञान", | |
| "original_question_num": 71, | |
| "question": "The assembly of four masses connected by rigid mass-less rods is kept on a smooth horizontal floor as shown in the figure. Under the applied force 2F, the magnitude of angular acceleration of the assembly at the instant shown is", | |
| "options": [ | |
| "F/mc", | |
| "F/2mc", | |
| "2F/3mc", | |
| "F/3mc" | |
| ], | |
| "answer": 1, | |
| "image_png": "xe_question_71.png", | |
| "image_information": "essential", | |
| "image_type": "diagram", | |
| "parallel_question_id": null | |
| }, | |
| { | |
| "language": "en", | |
| "country": "India", | |
| "file_name": "xe_2022.pdf", | |
| "source": "https://gate.iitkgp.ac.in/documents/gatepapers/2022/xe_2022.pdf", | |
| "license": "Education and Research", | |
| "level": "Graduate Aptitude Test in Engineering (GATE)", | |
| "category_en": "Engineering Sciences", | |
| "category_original_lang": "इंजीनियरिंग विज्ञान", | |
| "original_question_num": 72, | |
| "question": "A particle is constrained to move at a constant speed on an inclined plane (ABCD) along the curved path shown in the figure. Edges AD and BC are parallel to the y axis. The inclined plane makes an angle 𝜃 with the 𝑥𝑦-plane. The velocity vector of the particle makes an angle 𝜙 with the dotted line which is parallel to edge AB. If the speed of the particle is 2 m/s, 𝜙 30°, and 𝜃 40°, then the 𝑧-component of the velocity of the particle in m/s is __________", | |
| "options": [ | |
| "-1.32", | |
| "-1.00", | |
| "-1.11", | |
| "-1.50" | |
| ], | |
| "answer": 2, | |
| "image_png": "xe_question_72.png", | |
| "image_information": "essential", | |
| "image_type": "diagram", | |
| "parallel_question_id": null | |
| }, | |
| { | |
| "language": "en", | |
| "country": "India", | |
| "file_name": "xe_2022.pdf", | |
| "source": "https://gate.iitkgp.ac.in/documents/gatepapers/2022/xe_2022.pdf", | |
| "license": "Education and Research", | |
| "level": "Graduate Aptitude Test in Engineering (GATE)", | |
| "category_en": "Engineering Sciences", | |
| "category_original_lang": "इंजीनियरिंग विज्ञान", | |
| "original_question_num": 75, | |
| "question": "The beam in the figure is subjected to a moment M0 at mid span as shown. Which of the following is the vertical reaction at B?", | |
| "options": [ | |
| "9Mₒ/8L", | |
| "15Mₒ/8L", | |
| "3Mₒ/4L", | |
| "9Mₒ/4L" | |
| ], | |
| "answer": 0, | |
| "image_png": "xe_question_75.png", | |
| "image_information": "essential", | |
| "image_type": "diagram", | |
| "parallel_question_id": null | |
| }, | |
| { | |
| "language": "en", | |
| "country": "India", | |
| "file_name": "xe_2022.pdf", | |
| "source": "https://gate.iitkgp.ac.in/documents/gatepapers/2022/xe_2022.pdf", | |
| "license": "Education and Research", | |
| "level": "Graduate Aptitude Test in Engineering (GATE)", | |
| "category_en": "Engineering Sciences", | |
| "category_original_lang": "इंजीनियरिंग विज्ञान", | |
| "original_question_num": 76, | |
| "question": "A spring-mass system having a mass m and spring constant k, placed horizontally on a foundation, is connected to a vertically hanging mass m with the help of an inextensible string. Ignore the friction in the pulleys and also the inertia of pulleys, string and spring. Gravity is acting vertically downward as shown. The natural frequency of the system in rad/s is", | |
| "options": [ | |
| "√(4k/3m)", | |
| "√(k/2m)", | |
| "√(k/3m)", | |
| "√(4k/5m)" | |
| ], | |
| "answer": 3, | |
| "image_png": "xe_question_76.png", | |
| "image_information": "essential", | |
| "image_type": "diagram", | |
| "parallel_question_id": null | |
| }, | |
| { | |
| "language": "en", | |
| "country": "India", | |
| "file_name": "xe_2022.pdf", | |
| "source": "https://gate.iitkgp.ac.in/documents/gatepapers/2022/xe_2022.pdf", | |
| "license": "Education and Research", | |
| "level": "Graduate Aptitude Test in Engineering (GATE)", | |
| "category_en": "Engineering Sciences", | |
| "category_original_lang": "इंजीनियरिंग विज्ञान", | |
| "original_question_num": 77, | |
| "question": "One end of a uniform rigid rod OA of length L and mass m is attached to a frictionless hinge at O. The other end of the rod is connected to the roof at B with a mass-less inextensible thread AB. Initially the rod is horizontal and at rest. The gravity is acting vertically downward as shown. Immediately after the thread AB is cut, the reaction on the rod at O is", | |
| "options": [ | |
| "mg/4 in the positive y-direction", | |
| "mg/2 in the negative y-direction", | |
| "3mg/4 in the negative y-direction", | |
| "mg in the positive y-direction" | |
| ], | |
| "answer": 0, | |
| "image_png": "xe_question_77.png", | |
| "image_information": "essential", | |
| "image_type": "diagram", | |
| "parallel_question_id": null | |
| }, | |
| { | |
| "language": "en", | |
| "country": "India", | |
| "file_name": "xe_2022.pdf", | |
| "source": "https://gate.iitkgp.ac.in/documents/gatepapers/2022/xe_2022.pdf", | |
| "license": "Education and Research", | |
| "level": "Graduate Aptitude Test in Engineering (GATE)", | |
| "category_en": "Engineering Sciences", | |
| "category_original_lang": "इंजीनियरिंग विज्ञान", | |
| "original_question_num": 78, | |
| "question": "A circular shaft is rigidly connected to a wall at one end. The shaft has a solid portion and a hollow portion as shown in the figure. The length of each portion is L and the shear modulus of the material is 𝐺. The polar moment of inertia of the hollow portion is 𝐽 and that of the solid portion is 50𝐽. A torque 𝑇 is applied at the right most end as shown. The rotation of the section PQ is", | |
| "options": [ | |
| "27𝑇L/100𝐽𝐺", | |
| "𝑇L/40𝐽𝐺", | |
| "5𝑇L/4𝐽𝐺", | |
| "3𝑇L/4𝐽𝐺" | |
| ], | |
| "answer": 0, | |
| "image_png": "xe_question_78.png", | |
| "image_information": "essential", | |
| "image_type": "diagram", | |
| "parallel_question_id": null | |
| }, | |
| { | |
| "language": "en", | |
| "country": "India", | |
| "file_name": "xe_2022.pdf", | |
| "source": "https://gate.iitkgp.ac.in/documents/gatepapers/2022/xe_2022.pdf", | |
| "license": "Education and Research", | |
| "level": "Graduate Aptitude Test in Engineering (GATE)", | |
| "category_en": "Engineering Sciences", | |
| "category_original_lang": "इंजीनियरिंग विज्ञान", | |
| "original_question_num": 79, | |
| "question": "A rectangular plate of uniform thickness having initial length a and width b is placed between two rigid immovable walls. The temperature of the plate is increased by ΔT. The plate is free to expand along the y and z directions. The mid-surface of the plate remains in the xy-plane. The Poisson’s ratio is v and the coefficient of thermal expansion is α. Assuming that the plate is initially free of stresses, the change in length of the plate after the increase in temperature is given by", | |
| "options": [ | |
| "a(1-v)αΔT", | |
| "a(1+v)αΔT", | |
| "aαΔT", | |
| "2aαΔT" | |
| ], | |
| "answer": 1, | |
| "image_png": "xe_question_79.png", | |
| "image_information": "essential", | |
| "image_type": "diagram", | |
| "parallel_question_id": null | |
| }, | |
| { | |
| "language": "en", | |
| "country": "India", | |
| "file_name": "xe_2022.pdf", | |
| "source": "https://gate.iitkgp.ac.in/documents/gatepapers/2022/xe_2022.pdf", | |
| "license": "Education and Research", | |
| "level": "Graduate Aptitude Test in Engineering (GATE)", | |
| "category_en": "Engineering Sciences", | |
| "category_original_lang": "इंजीनियरिंग विज्ञान", | |
| "original_question_num": 80, | |
| "question": "A mass m = 10 kg is attached to a spring as shown in the figure. The coefficient of friction between the mass and the inclined plane is 0.25. Assume that the acceleration due to gravity is 10 m/s2 and that static and kinematic friction coefficients are the same. Equilibrium of the mass is impossible if the spring force is", | |
| "options": [ | |
| "30 N", | |
| "45 N", | |
| "60 N", | |
| "75 N" | |
| ], | |
| "answer": 0, | |
| "image_png": "xe_question_80.png", | |
| "image_information": "essential", | |
| "image_type": "diagram", | |
| "parallel_question_id": null | |
| }, | |
| { | |
| "language": "en", | |
| "country": "India", | |
| "file_name": "xe_2022.pdf", | |
| "source": "https://gate.iitkgp.ac.in/documents/gatepapers/2022/xe_2022.pdf", | |
| "license": "Education and Research", | |
| "level": "Graduate Aptitude Test in Engineering (GATE)", | |
| "category_en": "Engineering Sciences", | |
| "category_original_lang": "इंजीनियरिंग विज्ञान", | |
| "original_question_num": 120, | |
| "question": "Match the properties in Column A with their respective unit in Column B.", | |
| "options": [ | |
| "P-1; Q-3; R-4; S-2", | |
| "P-2; Q-3; R-1; S-4", | |
| "P-3; Q-1; R-4; S-2", | |
| "P-3; Q-1; R-2; S-4" | |
| ], | |
| "answer": 3, | |
| "image_png": "xe_question_120.png", | |
| "image_information": "essential", | |
| "image_type": "table", | |
| "parallel_question_id": null | |
| }, | |
| { | |
| "language": "en", | |
| "country": "India", | |
| "file_name": "xe_2022.pdf", | |
| "source": "https://gate.iitkgp.ac.in/documents/gatepapers/2022/xe_2022.pdf", | |
| "license": "Education and Research", | |
| "level": "Graduate Aptitude Test in Engineering (GATE)", | |
| "category_en": "Engineering Sciences", | |
| "category_original_lang": "इंजीनियरिंग विज्ञान", | |
| "original_question_num": 121, | |
| "question": "Match the following ploymer product with its most appropriate processing technique.", | |
| "options": [ | |
| "P-3; Q-4; R-1; S-2", | |
| "P-3; Q-4; R-2; S-1", | |
| "P-4; Q-3; R-2; S-1", | |
| "P-3; Q-2; R-4; S-1" | |
| ], | |
| "answer": 1, | |
| "image_png": "xe_question_121.png", | |
| "image_information": "essential", | |
| "image_type": "table", | |
| "parallel_question_id": null | |
| }, | |
| { | |
| "language": "en", | |
| "country": "India", | |
| "file_name": "xe_2022.pdf", | |
| "source": "https://gate.iitkgp.ac.in/documents/gatepapers/2022/xe_2022.pdf", | |
| "license": "Education and Research", | |
| "level": "Graduate Aptitude Test in Engineering (GATE)", | |
| "category_en": "Engineering Sciences", | |
| "category_original_lang": "इंजीनियरिंग विज्ञान", | |
| "original_question_num": 122, | |
| "question": "Match the following additives to their respective functions", | |
| "options": [ | |
| "P-4; Q-2; R-1; S-3", | |
| "P-3; Q-1; R-2; S-4", | |
| "P-4; Q-1; R-3; S-2", | |
| "P-4; Q-1; R-2; S-3" | |
| ], | |
| "answer": 3, | |
| "image_png": "xe_question_122.png", | |
| "image_information": "essential", | |
| "image_type": "table", | |
| "parallel_question_id": null | |
| }, | |
| { | |
| "language": "en", | |
| "country": "India", | |
| "file_name": "xe_2022.pdf", | |
| "source": "https://gate.iitkgp.ac.in/documents/gatepapers/2022/xe_2022.pdf", | |
| "license": "Education and Research", | |
| "level": "Graduate Aptitude Test in Engineering (GATE)", | |
| "category_en": "Engineering Sciences", | |
| "category_original_lang": "इंजीनियरिंग विज्ञान", | |
| "original_question_num": 123, | |
| "question": "Match the polymers with their characteristic infrared (IR) stretching frequency.", | |
| "options": [ | |
| "P-4; Q-3; R-2; S-1", | |
| "P-3; Q-4; R-2; S-1", | |
| "P-3; Q-4; R-1; S-2", | |
| "P-3; Q-2; R-4; S-1" | |
| ], | |
| "answer": 1, | |
| "image_png": "xe_question_123.png", | |
| "image_information": "essential", | |
| "image_type": "table", | |
| "parallel_question_id": null | |
| }, | |
| { | |
| "language": "en", | |
| "country": "India", | |
| "file_name": "xe_2022.pdf", | |
| "source": "https://gate.iitkgp.ac.in/documents/gatepapers/2022/xe_2022.pdf", | |
| "license": "Education and Research", | |
| "level": "Graduate Aptitude Test in Engineering (GATE)", | |
| "category_en": "Engineering Sciences", | |
| "category_original_lang": "इंजीनियरिंग विज्ञान", | |
| "original_question_num": 124, | |
| "question": "Match the following ploymers to the most appropriate product", | |
| "options": [ | |
| "P-2; Q-1; R-4; S-3", | |
| "P-2; Q-4; R-1; S-3", | |
| "P-3; Q-1; R-2; S-4", | |
| "P-3; Q-1; R-4; S-2" | |
| ], | |
| "answer": 3, | |
| "image_png": "xe_question_124.png", | |
| "image_information": "essential", | |
| "image_type": "table", | |
| "parallel_question_id": null | |
| }, | |
| { | |
| "language": "en", | |
| "country": "India", | |
| "file_name": "xe_2022.pdf", | |
| "source": "https://gate.iitkgp.ac.in/documents/gatepapers/2022/xe_2022.pdf", | |
| "license": "Education and Research", | |
| "level": "Graduate Aptitude Test in Engineering (GATE)", | |
| "category_en": "Engineering Sciences", | |
| "category_original_lang": "इंजीनियरिंग विज्ञान", | |
| "original_question_num": 125, | |
| "question": "Match the polymers to the polymerization method used for their synthesis.", | |
| "options": [ | |
| "P-2; Q-1; R-4; S-3", | |
| "P-2; Q-1; R-3; S-4", | |
| "P-2; Q-3; R-4; S-1", | |
| "P-2; Q-4; R-1; S-3" | |
| ], | |
| "answer": 0, | |
| "image_png": "xe_question_125.png", | |
| "image_information": "essential", | |
| "image_type": "table", | |
| "parallel_question_id": null | |
| }, | |
| { | |
| "language": "en", | |
| "country": "India", | |
| "file_name": "xe_2022.pdf", | |
| "source": "https://gate.iitkgp.ac.in/documents/gatepapers/2022/xe_2022.pdf", | |
| "license": "Education and Research", | |
| "level": "Graduate Aptitude Test in Engineering (GATE)", | |
| "category_en": "Engineering Sciences", | |
| "category_original_lang": "इंजीनियरिंग विज्ञान", | |
| "original_question_num": 132, | |
| "question": "Which among the given options truly depict the lines 1 and 2 in the figure below with respect to the effect of heat processing on food?", | |
| "options": [ | |
| "1-Safety, 2-Quality", | |
| "1-Yield, 2-Safety", | |
| "1-Yield, 2-Quality", | |
| "1-Quality, 2-Safety" | |
| ], | |
| "answer": 0, | |
| "image_png": "xe_question_132.png", | |
| "image_information": "essential", | |
| "image_type": "diagram", | |
| "parallel_question_id": null | |
| }, | |
| { | |
| "language": "en", | |
| "country": "India", | |
| "file_name": "xe_2022.pdf", | |
| "source": "https://gate.iitkgp.ac.in/documents/gatepapers/2022/xe_2022.pdf", | |
| "license": "Education and Research", | |
| "level": "Graduate Aptitude Test in Engineering (GATE)", | |
| "category_en": "Engineering Sciences", | |
| "category_original_lang": "इंजीनियरिंग विज्ञान", | |
| "original_question_num": 141, | |
| "question": "Match the edible oil refining stages given in Column I with their respective functions in Column II.", | |
| "options": [ | |
| "P-3, Q-2, R-1, S-4", | |
| "P-2, Q-1, R-3, S-4", | |
| "P-3, Q-4, R-2, S-1", | |
| "P-3, Q-1, R-2, S-4" | |
| ], | |
| "answer": 2, | |
| "image_png": "xe_question_141.png", | |
| "image_information": "essential", | |
| "image_type": "table", | |
| "parallel_question_id": null | |
| }, | |
| { | |
| "language": "en", | |
| "country": "India", | |
| "file_name": "xe_2022.pdf", | |
| "source": "https://gate.iitkgp.ac.in/documents/gatepapers/2022/xe_2022.pdf", | |
| "license": "Education and Research", | |
| "level": "Graduate Aptitude Test in Engineering (GATE)", | |
| "category_en": "Engineering Sciences", | |
| "category_original_lang": "इंजीनियरिंग विज्ञान", | |
| "original_question_num": 142, | |
| "question": "Make the correct pair of food packaging technology given in Column I with operating principle or description in Column II.", | |
| "options": [ | |
| "P-3, Q-4, R-1, S-2", | |
| "P-3, Q-2, R-1, S-4", | |
| "P-1, Q-4, R-3, S-2", | |
| "P-3, Q-1, R-4, S-2" | |
| ], | |
| "answer": 0, | |
| "image_png": "xe_question_142.png", | |
| "image_information": "essential", | |
| "image_type": "table", | |
| "parallel_question_id": null | |
| }, | |
| { | |
| "language": "en", | |
| "country": "India", | |
| "file_name": "xe_2022.pdf", | |
| "source": "https://gate.iitkgp.ac.in/documents/gatepapers/2022/xe_2022.pdf", | |
| "license": "Education and Research", | |
| "level": "Graduate Aptitude Test in Engineering (GATE)", | |
| "category_en": "Engineering Sciences", | |
| "category_original_lang": "इंजीनियरिंग विज्ञान", | |
| "original_question_num": 144, | |
| "question": "Match the size reduction equipment in Column I with the method of operation in Column II.", | |
| "options": [ | |
| "P-2, Q-4, R-1, S-3", | |
| "P-3, Q-1, R-2, S-4", | |
| "P-4, Q-1, R-2, S-3", | |
| "P-3, Q-4, R-2, S-1" | |
| ], | |
| "answer": 0, | |
| "image_png": "xe_question_144.png", | |
| "image_information": "essential", | |
| "image_type": "table", | |
| "parallel_question_id": null | |
| }, | |
| { | |
| "language": "en", | |
| "country": "India", | |
| "file_name": "xe_2022.pdf", | |
| "source": "https://gate.iitkgp.ac.in/documents/gatepapers/2022/xe_2022.pdf", | |
| "license": "Education and Research", | |
| "level": "Graduate Aptitude Test in Engineering (GATE)", | |
| "category_en": "Engineering Sciences", | |
| "category_original_lang": "इंजीनियरिंग विज्ञान", | |
| "original_question_num": 154, | |
| "question": "The figure shows a schematic of vertical profiles of concentrations of two gases P and Q in the atmosphere near a coastal station. The correct pair representing P and Q, respectively, is", | |
| "options": [ | |
| "water vapor and CO₂", | |
| "O₃ and water vapor", | |
| "CO₂ and O₃", | |
| "N₂ and O₂" | |
| ], | |
| "answer": 0, | |
| "image_png": "xe_question_154.png", | |
| "image_information": "essential", | |
| "image_type": "diagram", | |
| "parallel_question_id": null | |
| }, | |
| { | |
| "language": "en", | |
| "country": "India", | |
| "file_name": "xe_2022.pdf", | |
| "source": "https://gate.iitkgp.ac.in/documents/gatepapers/2022/xe_2022.pdf", | |
| "license": "Education and Research", | |
| "level": "Graduate Aptitude Test in Engineering (GATE)", | |
| "category_en": "Engineering Sciences", | |
| "category_original_lang": "इंजीनियरिंग विज्ञान", | |
| "original_question_num": 163, | |
| "question": "An unsaturated moist air parcel undergoes adiabatic ascent in atmosphere without mixing with surrounding air. Air is so clean that there is no possibility for heterogeneous nucleation. Which one of the following plots depicts the vertical variation of water vapor pressure (shown as continuous line) and saturation water vapor pressure (shown as dotted/dashed line) of the parcel?", | |
| "options": [ | |
| "P", | |
| "Q", | |
| "R", | |
| "S" | |
| ], | |
| "answer": 0, | |
| "image_png": "xe_question_163.png", | |
| "image_information": "essential", | |
| "image_type": "diagram", | |
| "parallel_question_id": null | |
| } | |
| ] |